# packages

pkgId: c3b076cac05f0d29ea87b06131f6844e633e7adbc90caa38126e93a4444f2b1d
name: cni-plugins
arch: i686
version: 1.3.0
epoch: 0
release: 1.el7
summary: Container Network Interface plugins
url: https://github.com/containernetworking/plugins
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: System/Management
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cni-plugins-1.3.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cni-plugins-1.3.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The CNI (Container Network Interface) project consists of a
  specification and libraries for writing plugins to configure
  network interfaces in Linux containers, along with a number of
  supported plugins. CNI concerns itself only with network
  connectivity of containers and removing allocated resources when
  the container is deleted. Because of this focus, CNI has a wide
  range of support and the specification is simple to implement.

  These are the additional CNI network plugins provided by
  the containernetworking team.


pkgId: a6bab1208e0548201e00e2b5c57bc1cee5f689cdc21e7bc140ceb130e2571225
name: cockpit
arch: x86_64
version: 234
epoch: 0
release: 2.el7
summary: Web Console for Linux servers
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-234-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The Cockpit Web Console enables users to administer GNU/Linux servers using a
  web browser.

  It offers network configuration, log inspection, diagnostic reports, SELinux
  troubleshooting, interactive command-line sessions, and more.


pkgId: 533c09c136050ff5fdbcc0c49ef7e8e3f11bd3e91e02fc0e07bc0f6dc10da60c
name: cockpit-bridge
arch: x86_64
version: 234
epoch: 0
release: 2.el7
summary: Cockpit bridge server-side component
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-bridge-234-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The Cockpit bridge component installed server side and runs commands on the
  system on behalf of the web based user interface.


pkgId: c7e212d6900be54f4251c4a9b2bff9bb162d13ebc6d8307999b93456007e1e62
name: cockpit-doc
arch: noarch
version: 234
epoch: 0
release: 2.el7
summary: Cockpit deployment and developer guide
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-doc-234-2.el7.noarch.rpm
checksum_type: sha256
description:
  The Cockpit Deployment and Developer Guide shows sysadmins how to
  deploy Cockpit on their machines as well as helps developers who want to
  embed or extend Cockpit.


pkgId: 4470451d6f292f82c43d3a619dbc7d2103c6e74f4872639357ecd31051df9137
name: cockpit-machines
arch: noarch
version: 234
epoch: 0
release: 2.el7
summary: Cockpit user interface for virtual machines
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-machines-234-2.el7.noarch.rpm
checksum_type: sha256
description:
  The Cockpit components for managing virtual machines.

  If "virt-install" is installed, you can also create new virtual machines.


pkgId: f75086ac8c31c0cef65958cc095924420c432d845808a51e0dd96228bed24a3e
name: cockpit-selinux
arch: noarch
version: 234
epoch: 0
release: 5.el7
summary: Cockpit SELinux package
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-selinux-234-5.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the Cockpit user interface integration with the
  utility setroubleshoot to diagnose and resolve SELinux issues.


pkgId: f67a69366005e3310529f9b29f3d1b8efd6fc89415880066e41a887d11d08aa0
name: cockpit-tests
arch: x86_64
version: 234
epoch: 0
release: 2.el7
summary: Tests for Cockpit
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-tests-234-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains tests and files used while testing Cockpit.
  These files are not required for running Cockpit.


pkgId: cd1513d50c2ef5ef3d6670ed0b018b22ce9957c7ac1e6d70e439b8782dfc2ed1
name: cockpit-ws
arch: x86_64
version: 234
epoch: 0
release: 2.el7
summary: Cockpit Web Service
url: https://cockpit-project.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cockpit-234-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cockpit-ws-234-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The Cockpit Web Service listens on the network, and authenticates users.

  If sssd-dbus is installed, you can enable client certificate/smart card
  authentication via sssd/FreeIPA.


pkgId: cebffc06f9eb38eb527ceb3892fbfb3017649723c6b5e03ad26e7af601fe001c
name: codeblocks
arch: i686
version: 20.03
epoch: 0
release: 3.el7
summary: An open source, cross platform, free C++ IDE
url: http://www.codeblocks.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: codeblocks-20.03-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: codeblocks-20.03-3.el7.i686.rpm
checksum_type: sha256
description:
  Code::Blocks is a free C++ IDE built specifically to meet the most demanding
  needs of its users. It was designed, right from the start, to be extensible
  and configurable. Built around a plug-in framework, Code::Blocks can be
  extended with plug-in DLLs. It includes a plugin wizard, so you can compile
  your own plug-ins.


pkgId: 9e026e2ab43742e32f2e3a77403a169253d9339286302c45e5870869c272a9ae
name: codium
arch: x86_64
version: 1.66.1
epoch: 0
release: 1.el7
summary: Code editing. Redefined.
url: https://vscodium.com/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Development/Tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: codium-1.66.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: codium-1.66.1-1.el7.x86_64.rpm
checksum_type: sha256
description:
  VSCodium is a new choice of tool that combines the
  simplicity of a code editor with what developers need
  for the core edit-build-debug cycle.

  See https://github.com/VSCodium/vscodium#download-install
  for installation instructions and FAQ.


pkgId: 0fbf24cfed7f40f346168406a53bbe1154fc34752b649b73bda70d6b75ffe148
name: collectd
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Statistics collection daemon for filling RRD files
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  collectd is a daemon which collects system performance statistics periodically
  and provides mechanisms to store the values in a variety of ways,
  for example in RRD files.


pkgId: c54107bc74c4a9a4b9f5226e962e0c0461cf6a91fcd398b62a29e849921bbc01
name: collectd-amqp
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: AMQP plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-amqp-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin can be used to communicate with other instances of collectd
  or third party applications using an AMQP message broker.


pkgId: fb170e107520584ab03b6dc23dca1da9e57133c403046a8ee3c9db985de9a98f
name: collectd-amqp1
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Sends JSON-encoded data to an AMQP1 message intermediary
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-amqp1-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Sends JSON-encoded data to an Advanced Message Queuing Protocol (AMQP)
  1.0 server, such as Qpid Dispatch Router or Apache Artemis Broker.


pkgId: c6085183ced2cd633141d1ca30ff137fd577825f07ec5f7b94b7e1b677aa75dd
name: collectd-dbi
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: DBI plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-dbi-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin uses the dbi library to connect to various databases,
  execute SQL statements and read back the results.


pkgId: e049e016c61ba521d77117a500f42d3c90c939b61d7740aa66e4b5ea6d337cb5
name: collectd-lua
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Lua plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-lua-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The Lua plugin embeds a Lua interpreter into collectd and exposes the
  application programming interface (API) to Lua scripts.


pkgId: bf580fae642b5691061b5bf56c85db842d1c8fe54d3a9bdfa5dee3ab636a2992
name: collectd-mcelog
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Mcelog plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-mcelog-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin monitors machine check exceptions reported by mcelog and generates
  appropriate notifications when machine check exceptions are detected.


pkgId: 8a3fa1a8bee240119bfb8c85784ff5958aa96f5333362123e721891b563d08b6
name: collectd-mdevents
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Get events from RAID arrays in syslog
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-mdevents-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin, named mdevents, is responsible for gathering the events
  from RAID arrays that were written to syslog by mdadm utility (which
  is a user-space software for managing the RAIDs). Then, based on
  configuration provided by user, plugin will decide whether to send the
  collectd notification or not.

  Mdevents needs the syslog and mdadm to be present on a platform that
  collectd is launched.


pkgId: ba94ecc00d5609caac1cc92e5cd332ed03ee816693759afd91b293b0e0af5b80
name: collectd-memcachec
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Memcachec plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-memcachec-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin connects to a memcached server, queries one or more
  given pages and parses the returned data according to user specification.


pkgId: b797424f3ee8000a0833fedf063edf62da6a8effaed5097309d47ab1beb1f9a8
name: collectd-mysql
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: MySQL plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-mysql-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  MySQL querying plugin. This plugin provides data of issued commands,
  called handlers and database traffic.


pkgId: bca5ca04d25955f4f407798c333ba78c852979ad5a811b2639fc190cb9e23b1c
name: collectd-netlink
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Netlink plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-netlink-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin uses a netlink socket to query the Linux kernel
  about statistics of various interface and routing aspects.


pkgId: 63eb8e1991abeb2d24f54217a8d489cd0c8965b94f75958993c8c6b483e9c20a
name: collectd-notify_desktop
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Notify desktop plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-notify_desktop-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin sends a desktop notification to a notification daemon,
  as defined in the Desktop Notification Specification.


pkgId: 0acefccd1ffb1b3f8ef4fc4939e51dd54818dabecc78c09749f3a2dc70118dd8
name: collectd-onewire
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: OneWire bus plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-onewire-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The experimental OneWire plugin collects temperature information
  from sensors connected to the computer over the OneWire bus.


pkgId: 8d7853beeaf1e02754753e046d21dc51514b9d228188546472d568ecf11fdaff
name: collectd-ovs_events
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Open vSwitch events plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-ovs_events-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin monitors the link status of Open vSwitch (OVS) connected
  interfaces, dispatches the values to collectd and sends notifications
  whenever a link state change occurs in the OVS database.


pkgId: 491ae30d836d67728a00f7775e5defb7d2c7521f43d67253d372fab0e867ed0c
name: collectd-postgresql
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: PostgreSQL plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-postgresql-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  PostgreSQL querying plugin. This plugins provides data of issued commands,
  called handlers and database traffic.


pkgId: e795d3b2be425d2e900009279bd3f1b87ec65d6766a5d6f04bfe17f97e534617
name: collectd-python
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Python plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-python-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The Python plugin embeds a Python interpreter into Collectd and exposes the
  application programming interface (API) to Python-scripts.


pkgId: 3d0cffaf00fb7f392bda07b3d30038dc95a7f4cafbfbb605f1a7fba0edfea223
name: collectd-redis
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Redis plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-redis-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The Redis plugin connects to one or more instances of Redis, a key-value store,
  and collects usage information using the hiredis library.


pkgId: aab3f5a36f2d293a8b5342119549eeb8aa700c0ab453cbd8eb1cb66ce13fdb3c
name: collectd-rrdcached
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: RRDCacheD plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-rrdcached-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin uses the RRDtool accelerator daemon, rrdcached(1),
  to store values to RRD files in an efficient manner.


pkgId: 3492fe8dd4eb1addc61f2929226e4d2556c30f167a411661170d27c9c85ea5de
name: collectd-smart
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: SMART plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-smart-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin for collectd collects SMART statistics,
  notably load cycle count, temperature and bad sectors.


pkgId: 28b01240e6c93f10856655935f6b4e495ae718e16a6863c54f95fdb69ec24ce8
name: collectd-snmp_agent
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: SNMP AgentX plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-snmp_agent-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin is an AgentX subagent that receives and handles queries
  from a SNMP master agent and returns the data collected by read plugins.


pkgId: 4c195b7a69b13cec01291b1d825af718c2174fcacde5860e925cf0bf7f5dc387
name: collectd-write_prometheus
arch: i686
version: 5.12.0
epoch: 0
release: 1.el7
summary: Prometheus output plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-write_prometheus-5.12.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin exposes collected values using an embedded HTTP
  server, turning the collectd daemon into a Prometheus exporter.


pkgId: b46019b3daf07929f81e7d82415d2c362e4f03203b994534cf429b534f133913
name: collectd-xmms
arch: i686
version: 5.9.2
epoch: 0
release: 3.el7
summary: XMMS plugin for collectd
url: https://collectd.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd-5.9.2-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd-xmms-5.9.2-3.el7.i686.rpm
checksum_type: sha256
description:
  This is a collectd plugin for the XMMS music player.
  It graphs the bit-rate and sampling rate as you play songs.


pkgId: 3572ad7d534ae2ef625213e16b4d519bcfc6f898278b52ca6f0878de31a9befa
name: collectd_exporter
arch: i686
version: 0.7.0
epoch: 0
release: 1.el7
summary: An exporter for collectd
url: https://github.com/prometheus/collectd_exporter
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: collectd_exporter-0.7.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: collectd_exporter-0.7.0-1.el7.i686.rpm
checksum_type: sha256
description:
  A server that accepts collectd stats via HTTP POST and exports them via HTTP
  for Prometheus consumption.


pkgId: 06cdd7164901038822e99c20d968856c073afc304a8691246bfbb9e3d15265df
name: common-lisp-controller
arch: noarch
version: 7.4
epoch: 0
release: 24.el7
summary: Common Lisp source and compiler manager
url: https://alioth.debian.org/projects/clc
rpm_license: LLGPL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: common-lisp-controller-7.4-24.el7.src.rpm
rpm_packager: RED SOFT
location_href: common-lisp-controller-7.4-24.el7.noarch.rpm
checksum_type: sha256
description:
  This package helps installing Common Lisp sources and compilers.
  It creates a user-specific cache of compiled objects. When a library
  or an implementation is upgraded, all compiled objects in the cache
  are flushed. It also provides tools to recompile all libraries.


pkgId: 127624fece09e4e8008c8666e4601fbbcbe4b8c5cf9c43b3a6c10cb518b485b3
name: compat-golang-github-alecthomas-kingpin-2-devel
arch: noarch
version: 2.3.2
epoch: 0
release: 1.el7
summary: Go command line and flag parser
url: https://github.com/alecthomas/kingpin
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-gopkg-alecthomas-kingpin-2-2.3.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-github-alecthomas-kingpin-2-devel-2.3.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  Kingpin is a fluent-style, type-safe command-line parser. It supports flags,
  nested commands, and positional arguments.

  This package provides symbolic links that alias the following Go import paths to
  gopkg.in/alecthomas/kingpin.v2:
   – github.com/alecthomas/kingpin/v2

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  gopkg.in/alecthomas/kingpin.v2.


pkgId: 6dd25c3f51965a9a1eb9d313caf60a763610044d9f68e5a5d22a8cf3572e6083
name: compat-golang-github-godbus-dbus-5-devel
arch: noarch
version: 5.0.3
epoch: 0
release: 0.1.el7
summary: Native Go bindings for D-Bus
url: https://github.com/godbus/dbus
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-github-godbus-dbus-5.0.3-0.1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-github-godbus-dbus-5-devel-5.0.3-0.1.el7.noarch.rpm
checksum_type: sha256
description:
  Dbus is a simple library that implements native Go client bindings for the D-Bus
  message bus system.


pkgId: fe71597403c8a97f5f0fe106a6212356d147c7d8f2b113fab1359fd701a0949a
name: compat-golang-github-jose-3-devel
arch: noarch
version: 3.0.4
epoch: 0
release: 1.el7
summary: An implementation of JOSE standards (JWE, JWS, JWT) in Go
url: https://github.com/go-jose/go-jose
rpm_license: ASL 2.0 and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-github-jose-3.0.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-github-jose-3-devel-3.0.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  An implementation of JOSE standards (JWE, JWS, JWT) in Go.

  This package provides symbolic links that alias the following Go import paths to
  github.com/go-jose/go-jose:
   – github.com/go-jose/go-jose/v3

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  github.com/go-jose/go-jose.


pkgId: a56075efc46225313dc076c1c69f0a5657d4b962246890d4a99d9643a3d2167c
name: compat-golang-github-nats-io-devel
arch: noarch
version: 1.36.0
epoch: 0
release: 1.el7
summary: Golang client for NATS, the cloud native messaging system.
url: https://nats.io
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-github-nats-io-1.36.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-github-nats-io-devel-1.36.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Golang client for NATS, the cloud native messaging system.

  This package provides symbolic links that alias the following Go import paths to
  github.com/nats-io/nats.go:
   – github.com/nats-io/go-nats

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  github.com/nats-io/nats.go.


pkgId: c9a61ea797f17875c8e1dfe70cd7c969e738b52f13b4f417e31b953400686321
name: compat-golang-gopkg-3-yaml-devel
arch: noarch
version: 3.0.1
epoch: 0
release: 1.el7
summary: Поддержка YAML для языка Go
url: https://github.com/go-yaml/yaml
rpm_license: MIT and Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-gopkg-yaml-3-3.0.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-gopkg-3-yaml-devel-3.0.1-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides symbolic links that alias the following Go import paths to
  gopkg.in/yaml.v3:
   – gopkg.in/v3/yaml

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  gopkg.in/yaml.v3.


pkgId: 45949b075a9c1fd422f80f3a245fc82d8158a29d271d92435415f69a6f9ab93f
name: compat-golang-gopkg-fsnotify-1-devel
arch: noarch
version: 1.6.0
epoch: 0
release: 1.el7
summary: Cross-platform file system notifications for Go
url: https://github.com/fsnotify/fsnotify
rpm_license: BSD-3-Clause
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-github-fsnotify-1.6.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-gopkg-fsnotify-1-devel-1.6.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Cross-platform file system notifications for Go.

  This package provides symbolic links that alias the following Go import paths to
  github.com/fsnotify/fsnotify:
   – gopkg.in/fsnotify/fsnotify.v1
   – gopkg.in/fsnotify/v1/fsnotify

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  github.com/fsnotify/fsnotify.


pkgId: 9dc85fbf191fc5b28f0d9fd34299ae8d6b2e397434b469fd6ae00399e25e40ec
name: compat-golang-k8s-klog-2-devel
arch: noarch
version: 2.100.1
epoch: 0
release: 1.el7
summary: Leveled execution logs for Go (fork of https://github.com/golang/glog)
url: https://github.com/kubernetes/klog
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: golang-k8s-klog-2.100.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-golang-k8s-klog-2-devel-2.100.1-1.el7.noarch.rpm
checksum_type: sha256
description:
  Leveled execution logs for Go (fork of https://github.com/golang/glog).

  This package provides symbolic links that alias the following Go import paths to
  k8s.io/klog:
   – k8s.io/klog/v2

  Aliasing Go import paths via symbolic links or http redirects is fragile. If
  your Go code depends on this package, you should patch it to import directly
  k8s.io/klog.


pkgId: c5a654b948d110b37fd01bb78dfbe8f0be0ed9a50d3f0f747da56be24d468323
name: compat-libpthread-nonshared
arch: i686
version: 2.28
epoch: 0
release: 10.el7
summary: Compatibility support for linking against libpthread_nonshared.a.
url: http://www.gnu.org/software/glibc/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: glibc-2.28-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-libpthread-nonshared-2.28-10.el7.i686.rpm
checksum_type: sha256
description:
  This package provides compatibility support for applications that expect
  libpthread_nonshared.a to exist. The support provided is in the form of
  an empty libpthread_nonshared.a that allows dynamic links to succeed.
  Such applications should be adjusted to avoid linking against
  libpthread_nonshared.a which is no longer used. The static library
  libpthread_nonshared.a is an internal implementation detail of the C
  runtime and should not be expected to exist.

rpm_license:
  LGPLv2+ and LGPLv2+ with exceptions and GPLv2+ and GPLv2+ with exceptions and BSD and Inner-Net and ISC and Public Domain and GFDL


pkgId: ae23749af1af037efffa74487b50e330c4e74d4e5cb1fe38bafe734a0aad72be
name: compat-lua
arch: i686
version: 5.3.6
epoch: 0
release: 2.el7
summary: Powerful light-weight programming language (compat version)
url: https://www.lua.org
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compat-lua-5.3.6-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: compat-lua-5.3.6-2.el7.i686.rpm
checksum_type: sha256
description:
  Lua is a powerful light-weight programming language designed for
  extending applications. Lua is also frequently used as a
  general-purpose, stand-alone language. Lua is free software.
  Lua combines simple procedural syntax with powerful data description
  constructs based on associative arrays and extensible semantics. Lua
  is dynamically typed, interpreted from bytecodes, and has automatic
  memory management with garbage collection, making it ideal for
  configuration, scripting, and rapid prototyping.


pkgId: 172b6ab7a936612d93426766b033f0e238b6afea8bb259291bd1b15d0ce0431e
name: compface
arch: i686
version: 1.5.2
epoch: 0
release: 25.el7
summary: Library and tools for handling X-Face data
url: http://ftp.xemacs.org/pub/xemacs/aux/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compface-1.5.2-25.el7.src.rpm
rpm_packager: RED SOFT
location_href: compface-1.5.2-25.el7.i686.rpm
checksum_type: sha256
description:
  This is the Compface image compression and decompression library and its
  user tools. Compface converts 48x48 .xbm format (X bitmap) images to a
  compressed format that can be placed in the X-Face: mail header. Some mail
  programs are able to display such images when opening messages.


pkgId: 3962fdf61cc4a4922d79324973b8bd209286e81cf9d05618c177a919d4ba4d6c
name: compiler-rt17
arch: i686
version: 17.0.6
epoch: 0
release: 1.el7
summary: LLVM "compiler-rt" runtime libraries
url: http://llvm.org
rpm_license: Apache-2.0 WITH LLVM-exception OR NCSA OR MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiler-rt17-17.0.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiler-rt17-17.0.6-1.el7.i686.rpm
checksum_type: sha256
description:
  The compiler-rt project is a part of the LLVM project. It provides
  implementation of the low-level target-specific hooks required by
  code generation, sanitizer runtimes and profiling library for code
  instrumentation, and Blocks C language extension.


pkgId: c37e5d372c18385c5a9fef0ee8f624aea603cfccaa839b22c57941935c21b594
name: compiz
arch: i686
version: 0.9.14.2
epoch: 1
release: 4.el7
summary: OpenGL window and compositing manager
url: https://launchpad.net/compiz
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiz-0.9.14.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiz-0.9.14.2-4.el7.i686.rpm
checksum_type: sha256
description:
  Compiz is one of the first OpenGL-accelerated compositing window
  managers for the X Window System. The integration allows it to perform
  compositing effects in window management, such as a minimization
  effect and a cube work space. Compiz is an OpenGL compositing manager
  that use Compiz use EXT_texture_from_pixmap OpenGL extension for
  binding redirected top-level windows to texture objects.


pkgId: 3ea5017d9e774b42bd127eb58382ba68da5cb399c89aae4493c61d8d0fd7419f
name: compiz-config-manager
arch: i686
version: 0.9.14.2
epoch: 1
release: 4.el7
summary: Plugin and configuration tool for Compiz
url: https://launchpad.net/compiz
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiz-0.9.14.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiz-config-manager-0.9.14.2-4.el7.i686.rpm
checksum_type: sha256
description:
  The Compiz Project brings 3D desktop visual effects that improve usability
  of the X Window System and provide increased productivity though plugins
  and themes contributed by the community giving a rich desktop experience.
  This package contains a GUI configuration tool to configure Compiz plugins
  and the composite window manager.


pkgId: c5924dc9a08defdf6065ddc070c2a3e19c464123bddab7d9eeeac00416f22b39
name: compiz-devel
arch: i686
version: 0.9.14.2
epoch: 1
release: 4.el7
summary: Development packages for compiz
url: https://launchpad.net/compiz
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiz-0.9.14.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiz-devel-0.9.14.2-4.el7.i686.rpm
checksum_type: sha256
description:
  The compiz-devel package includes the header files,
  and developer docs for the compiz package.
  Install compiz-devel if you want to develop plugins for the compiz
  windows and compositing manager.


pkgId: 0423afd189e1bf46466fffc10133cea4f052d095c541a33903a0443dce658c7f
name: compiz-plugins-base
arch: i686
version: 0.9.14.2
epoch: 1
release: 4.el7
summary: Collection of base plugins for Compiz
url: https://launchpad.net/compiz
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiz-0.9.14.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiz-plugins-base-0.9.14.2-4.el7.i686.rpm
checksum_type: sha256
description:
  The Compiz Project brings 3D desktop visual effects that improve usability
  of the X Window System and provide increased productivity though plugins
  and themes contributed by the community giving a rich desktop experience.
  This package contains base plugins for Compiz.


pkgId: e853eda7661863022de6928608546f1b9998fe6f58808f447d19d90b83b910c2
name: compiz-plugins-main
arch: i686
version: 0.9.14.2
epoch: 1
release: 4.el7
summary: Collection of main plugins for Compiz
url: https://launchpad.net/compiz
rpm_license: GPLv2+ and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: compiz-0.9.14.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: compiz-plugins-main-0.9.14.2-4.el7.i686.rpm
checksum_type: sha256
description:
  The Compiz Project brings 3D desktop visual effects that improve usability
  of the X Window System and provide increased productivity though plugins
  and themes contributed by the community giving a rich desktop experience.
  This package contains main plugins for Compiz.


pkgId: 85297ec2b2ad910971d34f56e1b4852c2a988821c8a6a6615271af882ed51c3b
name: composer
arch: noarch
version: 2.3.10
epoch: 0
release: 1.el7.3
summary: Dependency Manager for PHP
url: https://getcomposer.org/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: composer-2.3.10-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: composer-2.3.10-1.el7.3.noarch.rpm
checksum_type: sha256
description:
  Composer helps you declare, manage and install dependencies of PHP projects,
  ensuring you have the right stack everywhere.

  Documentation: https://getcomposer.org/doc/


pkgId: 0787e585401a7b793f91e1830da4f530056aed38bf51193d1a82be7afb9f3817
name: composer-generators
arch: noarch
version: 0.1.2
epoch: 0
release: 1.el7
summary: Tools for composer enabled applications packager
url: https://git.remirepo.net/cgit/rpms/composer-generators.git/
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Development/Tools/Other
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: composer-generators-0.1.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: composer-generators-0.1.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides RPM generators which are used for
  getting provides from composer enabled applications.

  * find main project name and provide it
  * find bundled libraries and provide them


pkgId: 3d07674be76d00efebb55f689f9e268a063a94c1916cddefe28bc2b036eb1ad3
name: conky
arch: i686
version: 1.21.2
epoch: 0
release: 1.el7
summary: A system monitor for X
url: https://github.com/brndnmtthws/conky
rpm_license: GPL-3.0-or-later AND LGPL-2.1-or-later AND MIT-open-group AND BSD-3-Clause
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: conky-1.21.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: conky-1.21.2-1.el7.i686.rpm
checksum_type: sha256
description:
  A system monitor for X originally based on the torsmo code. but more kickass.
  It just keeps on given'er. Yeah.


pkgId: cab1ad0bed4e67d56b0078d1c2079813db2d2e4313882ecf243db21f9966acf5
name: conky-manager
arch: i686
version: 2.3.4
epoch: 0
release: 5.el7
summary: Conky scripts manager
url: http://teejeetech.blogspot.in/p/conky-manager.html
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: conky-manager-2.3.4-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: conky-manager-2.3.4-5.el7.i686.rpm
checksum_type: sha256
description:
  A simple GUI for managing Conky configuration files. Options for changing
  themes and running Conky at start up.


pkgId: 68e2b45f421de55328401752afea475816efc97355bb853689985df5786c679b
name: consul
arch: i686
version: 1.13.1
epoch: 0
release: 1.el7
summary: Consul is a tool for service discovery and configuration
url: https://github.com/hashicorp/consul
rpm_license: MPL-2.0
rpm_vendor: RED SOFT
rpm_group: Other
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: consul-1.13.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: consul-1.13.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Consul is a distributed, highly available, and data center aware solution to
  connect and configure applications across dynamic, distributed infrastructure.


pkgId: 4b83eee1248d3b4be2dd0b4d0bd05215d13f2f8889470e8d42867161b3d4a8ea
name: containerd
arch: i686
version: 1.5.18
epoch: 0
release: 1.el7
summary: Open and reliable container runtime
url: https://github.com/containerd/containerd
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containerd-1.5.18-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: containerd-1.5.18-1.el7.i686.rpm
checksum_type: sha256
description:
  Containerd is an industry-standard container runtime with an emphasis on
  simplicity, robustness and portability. It is available as a daemon for Linux
  and Windows, which can manage the complete container lifecycle of its host
  system: image transfer and storage, container execution and supervision,
  low-level storage and network attachments, etc.


pkgId: 8000a8480e3330b12eede217ba8f2f564afcea8afb460e028160c86c2aa89a21
name: containerd
arch: i686
version: 1.5.8
epoch: 0
release: 1.el7
summary: Open and reliable container runtime
url: https://github.com/containerd/containerd/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containerd-1.5.8-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: containerd-1.5.8-1.el7.i686.rpm
checksum_type: sha256
description:
  Containerd is an industry-standard container runtime with an emphasis on
  simplicity, robustness and portability. It is available as a daemon for Linux
  and Windows, which can manage the complete container lifecycle of its host
  system: image transfer and storage, container execution and supervision,
  low-level storage and network attachments, etc.


pkgId: 8be05ffabfa4a39c8bca7cc948c2c244c9f33e71c9c72e6ff5dcd6217244023d
name: containernetworking-plugins
arch: i686
version: 0.9.1
epoch: 0
release: 4.el7
summary: Libraries for writing CNI plugin
url: https://github.com/containernetworking/plugins
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containernetworking-plugins-0.9.1-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: containernetworking-plugins-0.9.1-4.el7.i686.rpm
checksum_type: sha256
description:
  The CNI (Container Network Interface) project consists of a specification
  and libraries for writing plugins to configure network interfaces in Linux
  containers, along with a number of supported plugins. CNI concerns itself
  only with network connectivity of containers and removing allocated resources
  when the container is deleted.


pkgId: 68d509fc1dc0c078e9bd244dfc8fc56184c9f2c2ac627aeffe7bdb0e5d7026ce
name: containernetworking-plugins
arch: i686
version: 1.6.2
epoch: 0
release: 1.el7
summary: Reference and example networking plugins, maintained by the CNI team
url: https://github.com/containernetworking/plugins
rpm_license: Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containernetworking-plugins-1.6.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: containernetworking-plugins-1.6.2-1.el7.i686.rpm
checksum_type: sha256
description:
  Reference and example networking plugins, maintained by the CNI team.
  The CNI (Container Network Interface) project consists of a specification
  and libraries for writing plugins to configure network interfaces in Linux
  containers, along with a number of supported plugins. CNI concerns itself
  only with network connectivity of containers and removing allocated resources
  when the container is deleted.


pkgId: aab5d9e7484b054c270ebfff9c384745b048d919f8dc22cde566cab14e3b9dc3
name: containernetworking-plugins-devel
arch: noarch
version: 0.9.1
epoch: 0
release: 4.el7
summary: Libraries for writing CNI plugin
url: https://github.com/containernetworking/plugins
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containernetworking-plugins-0.9.1-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: containernetworking-plugins-devel-0.9.1-4.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains library source intended for
  building other packages which use import path with
  github.com/containernetworking/plugins prefix.


pkgId: bd5a6cb45f662d3b31e54e7378787f14fcbe664c2182ed9d9f7034fcf304ba82
name: containers-common
arch: noarch
version: 0.58.0
epoch: 5
release: 1.el7
summary: Common configuration and documentation for containers.
url: https://github.com/containers/common
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containers-common-0.58.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: containers-common-0.58.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains common configuration files and documentation for container
  tools ecosystem, such as Podman, Buildah and Skopeo.

  It is required because the most of configuration files and docs come from projects
  which are vendored into Podman, Buildah, Skopeo, etc. but they are not packaged
  separately.


pkgId: 574b9a187849f564dc0100be31fba05fd5193bf1aceb2f9c1f917810dc910939
name: containers-common-extra
arch: noarch
version: 0.58.0
epoch: 5
release: 1.el7
summary: Extra dependencies for Podman and Buildah.
url: https://github.com/containers/common
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: containers-common-0.58.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: containers-common-extra-0.58.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  This subpackage will handle dependencies common to Podman and Buildah which are
  not required by Skopeo.


pkgId: 7ae969250a07d1eed20488e642563cc3daef94f388256677a00e1079ea3501ea
name: copy-jdk-configs
arch: noarch
version: 4.1
epoch: 0
release: 1.el7
summary: JDKs configuration files copier
url: https://pagure.io/copy_jdk_configs
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: copy-jdk-configs-4.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: copy-jdk-configs-4.1-1.el7.noarch.rpm
checksum_type: sha256
description:
  Utility script to transfer JDKs configuration files between updates or for
  archiving. With script to fix incorrectly created rpmnew files


pkgId: eff869b29a26b16178f2b66aeecc434d710aaeb579eeaaad5031e0bab351192e
name: coredns
arch: i686
version: 1.8.6
epoch: 0
release: 2.el7
summary: CoreDNS is a DNS server that chains plugins
url: https://coredns.io/
rpm_license: Apache-2.0 license
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: coredns-1.8.6-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: coredns-1.8.6-2.el7.i686.rpm
checksum_type: sha256
description:
  CoreDNS is a fast and flexible DNS server. The key word here is flexible: with
  CoreDNS you are able to do what you want with your DNS data by utilizing plugins.
  If some functionality is not provided out of the box you can add it by writing a
  plugin.


pkgId: c4bda7d806df19a05585467226a7b6f1f36d65deed27208085c5fbbbccc076ed
name: coreutils
arch: i686
version: 8.32
epoch: 0
release: 6.el7
summary: A set of basic GNU tools commonly used in shell scripts
url: https://www.gnu.org/software/coreutils/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: coreutils-8.32-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: coreutils-8.32-6.el7.i686.rpm
checksum_type: sha256
description:
  These are the GNU core utilities.  This package is the combination of
  the old GNU fileutils, sh-utils, and textutils packages.


pkgId: c611bd985571d25481367578c866b611236b23290a6e08193eded51a20511056
name: corosync
arch: i686
version: 3.1.6
epoch: 0
release: 1.el7
summary: The Corosync Cluster Engine and Application Programming Interfaces
url: http://corosync.github.io/corosync/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: corosync-3.1.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: corosync-3.1.6-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the Corosync Cluster Engine Executive, several default
  APIs and libraries, default configuration files, and an init script.


pkgId: 4c7cb6964b49abbea1b1ac0d36949a85ee19c8fc998ad2158df41582e0d33aa0
name: corosync-vqsim
arch: i686
version: 3.1.6
epoch: 0
release: 1.el7
summary: The Corosync Cluster Engine - Votequorum Simulator
url: http://corosync.github.io/corosync/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: corosync-3.1.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: corosync-vqsim-3.1.6-1.el7.i686.rpm
checksum_type: sha256
description:
  A command-line simulator for the corosync votequorum subsystem.
  It uses the same code as the corosync quorum system but forks
  them into subprocesses to simulate nodes.
  Nodes can be added and removed as well as partitioned (to simulate
  network splits)


pkgId: f5ff02db7b17f1154c722e1fb42c4556ac91fa308883fa3b00bbe257ba48bb52
name: corosynclib-devel
arch: i686
version: 3.1.6
epoch: 0
release: 1.el7
summary: The Corosync Cluster Engine Development Kit
url: http://corosync.github.io/corosync/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: corosync-3.1.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: corosynclib-devel-3.1.6-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains include files and man pages used to develop using
  The Corosync Cluster Engine APIs.


pkgId: bca512936a8be400b7c7d8a0d3a77db425eeee34983f5672bcf7fa09d77b1dc0
name: cowsql
arch: i686
version: 1.15.3
epoch: 0
release: 1.el7
summary: Embeddable, replicated and fault tolerant SQL engine
url: https://github.com/cowsql/cowsql
rpm_license: LGPL-3.0-only WITH LGPL-3.0-linking-exception
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cowsql-1.15.3-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cowsql-1.15.3-1.el7.i686.rpm
checksum_type: sha256
description:
  cowsql is a C library that implements an embeddable and replicated SQL database
  engine with high availability and automatic failover.

  cowsql extends SQLite with a network protocol that can connect together various
  instances of your application and have them act as a highly-available cluster,
  with no dependency on external databases.


pkgId: cccb014a01540c640c352487b1b403fc65300aef9dadaa4ade480163bf62d86e
name: cpio
arch: i686
version: 2.15
epoch: 0
release: 1.el7
summary: A GNU archiving program
url: https://www.gnu.org/software/cpio/
rpm_license: GPL-3.0-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cpio-2.15-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cpio-2.15-1.el7.i686.rpm
checksum_type: sha256
description:
  GNU cpio copies files into or out of a cpio or tar archive.  Archives
  are files which contain a collection of other files plus information
  about them, such as their file name, owner, timestamps, and access
  permissions.  The archive can be another file on the disk, a magnetic
  tape, or a pipe.  GNU cpio supports the following archive formats:  binary,
  old ASCII, new ASCII, crc, HPUX binary, HPUX old ASCII, old tar and POSIX.1
  tar.  By default, cpio creates binary format archives, so that they are
  compatible with older cpio programs.  When it is extracting files from
  archives, cpio automatically recognizes which kind of archive it is reading
  and can read archives created on machines with a different byte-order.

  Install cpio if you need a program to manage file archives.


pkgId: c19aa05cdcabd2aff031083aa2c8ec46b730d0640a6409d77c836833c1745c94
name: cpp
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: The C Preprocessor
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: cpp-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  Cpp is the GNU C-Compatible Compiler Preprocessor.
  Cpp is a macro processor which is used automatically
  by the C compiler to transform your program before actual
  compilation. It is called a macro processor because it allows
  you to define macros, abbreviations for longer
  constructs.

  The C preprocessor provides four separate functionalities: the
  inclusion of header files (files of declarations that can be
  substituted into your program); macro expansion (you can define macros,
  and the C preprocessor will replace the macros with their definitions
  throughout the program); conditional compilation (using special
  preprocessing directives, you can include or exclude parts of the
  program according to various conditions); and line control (if you use
  a program to combine or rearrange source files into an intermediate
  file which is then compiled, you can use line control to inform the
  compiler about where each source line originated).

  You should install this package if you are a C programmer and you use
  macros.


pkgId: 4a7e68ec50a2bfd15de41438c774ed277c54c4bb9aa2e168630a5de1aab1590c
name: cppcheck
arch: i686
version: 2.5
epoch: 0
release: 1.el7
summary: Tool for static C/C++ code analysis
url: http://cppcheck.wiki.sourceforge.net/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cppcheck-2.5-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cppcheck-2.5-1.el7.i686.rpm
checksum_type: sha256
description:
  Cppcheck is a static analysis tool for C/C++ code. Unlike C/C++
  compilers and many other analysis tools it does not detect syntax
  errors in the code. Cppcheck primarily detects the types of bugs that
  the compilers normally do not detect. The goal is to detect only real
  errors in the code (i.e. have zero false positives).


pkgId: a09c17eb6a8e1ca754eccc1f83a04b2865ff76a680cd436eefaab74a70e5501c
name: cppcheck-htmlreport
arch: i686
version: 2.5
epoch: 0
release: 1.el7
summary: HTML reporting for cppcheck
url: http://cppcheck.wiki.sourceforge.net/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cppcheck-2.5-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cppcheck-htmlreport-2.5-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the Python utility for generating html reports
  from xml files first generated using cppcheck.


pkgId: 2ea69372afa920249e6d6dd95552bd3f898db991ff2777a6395bd361ef3e5b65
name: crash
arch: i686
version: 8.0.1
epoch: 0
release: 1.el7
summary: Kernel analysis utility for live systems, netdump, diskdump, kdump, LKCD or mcore dumpfiles
url: https://crash-utility.github.io
rpm_license: GPLv3
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: crash-8.0.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: crash-8.0.1-1.el7.i686.rpm
checksum_type: sha256
description:
  The core analysis suite is a self-contained tool that can be used to
  investigate either live systems, kernel core dumps created from the
  netdump, diskdump and kdump packages from Red Hat Linux, the mcore kernel patch
  offered by Mission Critical Linux, or the LKCD kernel patch.


pkgId: 48c485d4720d04dd334ead99c98c9123651dae4b25a1f894242d45919748be99
name: createrepo_c
arch: x86_64
version: 0.17.6
epoch: 0
release: 1.el7
summary: Creates a common metadata repository
url: https://github.com/rpm-software-management/createrepo_c
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: createrepo_c-0.17.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: createrepo_c-0.17.6-1.el7.x86_64.rpm
checksum_type: sha256
description:
  C implementation of Createrepo.
  A set of utilities (createrepo_c, mergerepo_c, modifyrepo_c)
  for generating a common metadata repository from a directory of
  rpm packages and maintaining it.


pkgId: 55123b5615c3a83c2d8f6726b4d458c6bf19b1ae553190f93a0313b733cf7456
name: createrepo_c-devel
arch: x86_64
version: 0.17.6
epoch: 0
release: 1.el7
summary: Library for repodata manipulation
url: https://github.com/rpm-software-management/createrepo_c
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: createrepo_c-0.17.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: createrepo_c-devel-0.17.6-1.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the createrepo_c C library and header files.
  These development files are for easy manipulation with a repodata.


pkgId: 93822bdc588cda55d4f8b92a168cc8f69f687ecfdca169f641e85ef2232f5da3
name: crit
arch: x86_64
version: 3.16.1
epoch: 0
release: 2.el7
summary: CRIU image tool
url: http://criu.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: criu-3.16.1-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: crit-3.16.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  crit is a tool designed to decode CRIU binary dump files and show
  their content in human-readable form.


pkgId: 7700b5cddebd719455c4adacf836b72e8848d650918218a279898fc724f5f2ac
name: criu
arch: x86_64
version: 3.16.1
epoch: 0
release: 2.el7
summary: Tool for Checkpoint/Restore in User-space
url: http://criu.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: criu-3.16.1-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: criu-3.16.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  criu is the user-space part of Checkpoint/Restore in User-space
  (CRIU), a project to implement checkpoint/restore functionality for
  Linux in user-space.


pkgId: e6e7758a73b89c22366f67f4c86b3cedab0da116792bda722c195fac355e0da1
name: criu-ns
arch: x86_64
version: 3.16.1
epoch: 0
release: 2.el7
summary: Tool to run CRIU in different namespaces
url: http://criu.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: criu-3.16.1-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: criu-ns-3.16.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The purpose of the criu-ns wrapper script is to enable restoring a process
  tree that might require a specific PID that is already used on the system.
  This script can help to workaround the so called "PID mismatch" problem.


pkgId: d6496af88303b66073a9e5b821c1c856f92a9427f73a08eb2f45fad7070aa982
name: cross-binutils-common
arch: noarch
version: 2.37
epoch: 0
release: 1.el7
summary: Cross-build binary utility documentation and translation files
url: https://sourceware.org/binutils
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cross-binutils-2.37-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cross-binutils-common-2.37-1.el7.noarch.rpm
checksum_type: sha256
description:
  Documentation, manual pages and translation files for cross-build binary image
  generation, manipulation and query tools.


pkgId: b1f8c6d1b67510636ca12c78f4decc3e625fb6a30066b65ad96ff673236e61b8
name: cross-gcc-common
arch: noarch
version: 11.5.0
epoch: 0
release: 1.el7
summary: Cross-build GNU C compiler documentation and translation files
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cross-gcc-11.5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cross-gcc-common-11.5.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Documentation, manual pages and translation files for cross-build GNU C
  compiler.

  This is the common part of a set of cross-build GNU C compiler packages for
  building kernels for other architectures.  No support for cross-building
  user space programs is currently supplied as that would massively multiply the
  number of packages.


pkgId: 481c155d2b750eb5b32c4f124f69ce5d262b779ceb4ab4266ffb30d610ea8c2f
name: crypto-policies
arch: noarch
version: 20181217
epoch: 0
release: 8.git9a35207.el7
summary: Systemwide crypto policies
url: https://gitlab.com/redhat-crypto/fedora-crypto-policies
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: crypto-policies-20181217-8.git9a35207.el7.src.rpm
rpm_packager: RED SOFT
location_href: crypto-policies-20181217-8.git9a35207.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides a tool update-crypto-policies, which sets
  the policy applicable for the various cryptographic back-ends, such as
  SSL/TLS libraries. The policy set by the tool will be the default policy
  used by these back-ends unless the application user configures them otherwise.

  The package also provides a tool fips-mode-setup, which can be used
  to enable or disable the system FIPS mode.


pkgId: f10ed16cba4ade5241336af1ba31b19d5f6a7719df3a06d778f3ec3b08162501
name: crypto-policies
arch: noarch
version: 20200619
epoch: 0
release: 2.git781bbd4.el7
summary: System-wide crypto policies
url: https://gitlab.com/redhat-crypto/fedora-crypto-policies
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: crypto-policies-20200619-2.git781bbd4.el7.src.rpm
rpm_packager: RED SOFT
location_href: crypto-policies-20200619-2.git781bbd4.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides pre-built configuration files with
  cryptographic policies for various cryptographic back-ends,
  such as SSL/TLS libraries.


pkgId: 77278874be971d30ab0b6163ccba06036dfca0056f505c26667c70b16503ba9f
name: crypto-policies-scripts
arch: noarch
version: 20200619
epoch: 0
release: 2.git781bbd4.el7
summary: Tool to switch between crypto policies
url: https://gitlab.com/redhat-crypto/fedora-crypto-policies
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: crypto-policies-20200619-2.git781bbd4.el7.src.rpm
rpm_packager: RED SOFT
location_href: crypto-policies-scripts-20200619-2.git781bbd4.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides a tool update-crypto-policies, which applies
  the policies provided by the crypto-policies package. These can be
  either the pre-built policies from the base package or custom policies
  defined in simple policy definition files.


pkgId: 9bcaa8dd53d35b81503aeb807aeee4182bd45eb430f2ba7e0e88551095907f96
name: cryptsetup
arch: i686
version: 2.3.7
epoch: 0
release: 4.el7
summary: Utility for setting up encrypted disks
url: https://gitlab.com/cryptsetup/cryptsetup
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cryptsetup-2.3.7-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cryptsetup-2.3.7-4.el7.i686.rpm
checksum_type: sha256
description:
  The cryptsetup package contains a utility for setting up
  disk encryption using dm-crypt kernel module.


pkgId: 9415be027b526676e41162e9274cd261f3f62f9a2bc2e11e5e4a5e3e4bd16a16
name: cryptsetup-devel
arch: i686
version: 2.3.7
epoch: 0
release: 4.el7
summary: Headers and libraries for using encrypted file systems
url: https://gitlab.com/cryptsetup/cryptsetup
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cryptsetup-2.3.7-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cryptsetup-devel-2.3.7-4.el7.i686.rpm
checksum_type: sha256
description:
  The cryptsetup-devel package contains libraries and header files
  used for writing code that makes use of disk encryption.


pkgId: 1c703af467dabc6490134b41c0102952793e58a9ba474ebd965591cf5254f01a
name: cryptsetup-reencrypt
arch: i686
version: 2.3.7
epoch: 0
release: 4.el7
summary: A utility for offline reencryption of LUKS encrypted disks
url: https://gitlab.com/cryptsetup/cryptsetup
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cryptsetup-2.3.7-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cryptsetup-reencrypt-2.3.7-4.el7.i686.rpm
checksum_type: sha256
description:
  This package contains cryptsetup-reencrypt utility which
  can be used for offline reencryption of disk in situ.


pkgId: b6a895260ac9789846c12efb4d2183c23211732f7dd02a262641c68a938331af
name: ctdb
arch: i686
version: 4.14.6
epoch: 0
release: 1.el7.3
summary: A Clustered Database based on Samba's Trivial Database (TDB)
url: https://www.samba.org
rpm_license: GPLv3+ and LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: samba-4.14.6-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: ctdb-4.14.6-1.el7.3.i686.rpm
checksum_type: sha256
description:
  CTDB is a cluster implementation of the TDB database used by Samba and other
  projects to store temporary data. If an application is already using TDB for
  temporary data it is very easy to convert that application to be cluster aware
  and use CTDB instead.


pkgId: 6679b0f68a3babca0db8be3d24416348efea18462ee402998608c7656cc60560
name: ctemplate
arch: i686
version: 2.4
epoch: 0
release: 1.el7
summary: A simple but powerful template language for C++
url: https://github.com/olafvdspek/ctemplate
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ctemplate-2.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: ctemplate-2.4-1.el7.i686.rpm
checksum_type: sha256
description:
  CTemplate is a simple but powerful template language for C++. It
  emphasizes separating logic from presentation: it is impossible to
  embed application logic in this template language.


pkgId: bd14f256180db65fcd12696db525b95292a216b3b685f758046203219b457fc3
name: ctop
arch: i686
version: 0.7.7
epoch: 0
release: 1.el7
summary: Top-like interface for container metrics.
url: https://ctop.sh
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ctop-0.7.7-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: ctop-0.7.7-1.el7.i686.rpm
checksum_type: sha256
description:
  ctop provides a concise and condensed overview of real-time metrics for
  multiple containers as well as a single container view for inspecting a specific
  container. ctop comes with built-in support for Docker and runC; connectors
  for other container and cluster systems are planned for future releases.


pkgId: a77211e900ef1e66ef025b24ecfd4a2595758a76bf5e8f6fedb78a9d255d1043
name: cuda
arch: x86_64
version: 12.1.105
epoch: 1
release: 1.el7
summary: NVIDIA Compute Unified Device Architecture Toolkit
url: https://developer.nvidia.com/cuda-zone
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-12.1.105-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-12.1.105-1.el7.x86_64.rpm
checksum_type: sha256
description:
  CUDA is a parallel computing platform and programming model that enables
  dramatic increases in computing performance by harnessing the power of the
  graphics processing unit (GPU).


pkgId: 05ab8f56eea53dbe95070034ec8f98819ed1e579a294dfe239c2575c09e3e731
name: cuda-ctadvisor
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: CUDA ctadvisor
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-ctadvisor-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-ctadvisor-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  CUDA ctadvisor is a tool that analyzes trace files generated by NVCC and NVRTC,
  and emits advices to reduce compilation time.


pkgId: 5998a516ce4816aac09527159bb122c8c0265146214d8c7e98d06fa615091276
name: cuda-cuobjdump
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: Utility to extract information from CUDA binary files
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-cuobjdump-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-cuobjdump-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  cuobjdump extracts information from CUDA binary files (both standalone and those
  embedded in host binaries) and presents them in human readable format. The
  output of cuobjdump includes CUDA assembly code for each kernel, CUDA ELF
  section headers, string tables, relocators and other CUDA specific sections. It
  also extracts embedded ptx text from host binaries.


pkgId: f7bd9cfb64d05655d57bd22f8f0f0186c888949f19956c2a4d7d2db7245daeb8
name: cuda-cupti
arch: x86_64
version: 13.0.48
epoch: 1
release: 1.el7
summary: NVIDIA CUDA Profiling Tools Interface (CUPTI) library
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-cupti-13.0.48-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-cupti-13.0.48-1.el7.x86_64.rpm
checksum_type: sha256
description:
  The NVIDIA CUDA Profiling Tools Interface (CUPTI) provides performance analysis
  tools with detailed information about how applications are using the GPUs in a
  system.


pkgId: 76d80049e390438dc2f48bba3bbe7964442e5455b84a966af6bea7adab9a30bc
name: cuda-cupti-devel
arch: x86_64
version: 13.0.48
epoch: 1
release: 1.el7
summary: Development files for NVIDIA CUDA Profiling Tools Interface (CUPTI) library
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-cupti-13.0.48-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-cupti-devel-13.0.48-1.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides development files for the NVIDIA CUDA Profiling Tools
  Interface (CUPTI) library.


pkgId: 37e8cd397eef80f81b7c0e3a483123c7ca8b17b59d749bc71caa1afc9b5f5f58
name: cuda-nvcc
arch: x86_64
version: 13.0.48
epoch: 1
release: 1.el7
summary: CUDA Compiler (NVCC)
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvcc-13.0.48-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvcc-13.0.48-1.el7.x86_64.rpm
checksum_type: sha256
description:
  The compilation trajectory involves several splitting, compilation,
  preprocessing, and merging steps for each CUDA source file. It is the purpose of
  nvcc, the CUDA compiler driver, to hide the intricate details of CUDA
  compilation from developers. It accepts a range of conventional compiler
  options, such as for defining macros and include/library paths, and for steering
  the compilation process. All non-CUDA compilation steps are forwarded to a C++
  host compiler that is supported by nvcc, and nvcc translates its options to
  appropriate host compiler command line options.

  NVVM IR is a compiler IR (intermediate representation) based on the LLVM IR.
  The NVVM IR is designed to represent GPU compute kernels (for example, CUDA
  kernels). High-level language front-ends, like the CUDA C compiler front-end,
  can generate NVVM IR. The NVVM compiler (which is based on LLVM) generates PTX
  code from NVVM IR.


pkgId: aa9b3ce8ab5a02cb2f67c8a8f957229f0d10d5d963d3ce0f8c6a350575f14b2c
name: cuda-nvdisasm
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: Utility to extract information from CUDA binary files
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvdisasm-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvdisasm-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  nvdisasm extracts information from standalone cubin files and presents them in
  human readable format. The output of nvdisasm includes CUDA assembly code for
  each kernel, listing of ELF data sections and other CUDA specific sections.
  Output style and options are controlled through nvdisasm command-line options.
  nvdisasm also does control flow analysis to annotate jump/branch targets and
  makes the output easier to read.


pkgId: cad8f40766eb226db9ae59d45392737632fb3098fcee0df11a34c2c134d4b858
name: cuda-nvml-devel
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: Development files for the NVIDIA Management library (NVML)
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvml-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvml-devel-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides development files for the NVIDIA Management library
  (NVML). Main libraries are provided by the driver package.


pkgId: 4adc72133df578236915b09cd2ca8f925f998718121ed183b4ebcb20f40701d9
name: cuda-nvprune
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: CUDA nvprune
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvprune-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvprune-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  nvprune prunes host object files and libraries to only contain device code for
  the specified targets.


pkgId: 965af59dfe603bbbac393508f95ad868986c6589dd32532f37315e9e4b63e9c8
name: cuda-nvrtc
arch: x86_64
version: 13.0.48
epoch: 1
release: 1.el7
summary: CUDA runtime compilation library (NVRTC)
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvrtc-13.0.48-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvrtc-13.0.48-1.el7.x86_64.rpm
checksum_type: sha256
description:
  NVRTC is a runtime compilation library for CUDA C++. It accepts CUDA C++ source
  code in character string form and creates handles that can be used to obtain
  the PTX. The PTX string generated by NVRTC can be loaded by cuModuleLoadData and
  cuModuleLoadDataEx, and linked with other modules by cuLinkAddData of the CUDA
  Driver API. This facility can often provide optimizations and performance not
  possible in a purely offline static compilation.


pkgId: 5a5929d06112fe4df6bde871ca3e5bdfc1d72d51a10dd4dd3705b497bada1481
name: cuda-nvtx
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: NVIDIA Tools Extension (NVTX) library
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-nvtx-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-nvtx-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  A C-based API for annotating events, code ranges, and resources in your
  applications. Applications which integrate NVTX can use the Visual Profiler to
  capture and visualize these events and ranges.


pkgId: 02fd5c67dbd5bb8ba9f9aa0e79744b7cb237efaf9be012e3015126794ab26ccb
name: cuda-sandbox-devel
arch: x86_64
version: 13.0.39
epoch: 1
release: 1.el7
summary: CUDA nvsandboxutils
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-sandbox-13.0.39-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-sandbox-devel-13.0.39-1.el7.x86_64.rpm
checksum_type: sha256
description:
  A C-based API for monitoring and managing various states of the NVIDIA GPU
  devices. It provides a direct access to the queries and commands exposed via
  nvidia-smi. The runtime version of NVML ships with the NVIDIA display driver.

  Each new version of NVML is backwards compatible and is intended to be a
  platform for building 3rd party applications.


pkgId: 3ed309bc61961203e4339a4ca2f189fcac4bd16d8865e1d5451f878557127435
name: cuda-sanitizer
arch: i686
version: 13.0.48
epoch: 1
release: 2.el7
summary: CUDA Compute Sanitizer API
url: https://developer.nvidia.com/cuda-toolkit
rpm_license: CUDA Toolkit
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cuda-sanitizer-13.0.48-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: cuda-sanitizer-13.0.48-2.el7.i686.rpm
checksum_type: sha256
description:
  Compute Sanitizer is a functional correctness checking suite included in the
  CUDA toolkit. It provides a set of API's to enable third party tools to write
  GPU sanitizing tools, such as memory and race checkers.


pkgId: a0ea0d55cc8e93fec8649ca266017d5fdb7989e4d93c36f3ad2ae208d1bfe1a6
name: cups
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system
url: https://openprinting.github.io/cups/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. It has been developed by Apple Inc.
  to promote a standard printing solution for all UNIX vendors and users.
  CUPS provides the System V and Berkeley command-line interfaces.


pkgId: 697e3d9492db77320aa225900debce6397f97a0e7f12eaa4190930ba711d4172
name: cups-client
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - client programs
url: https://openprinting.github.io/cups/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-client-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. This package contains command-line client
  programs.


pkgId: da92aac872f2f0ae8db8b6d31abbc7d4e06621ed24757955034a50d5dc252031
name: cups-devel
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - development environment
url: https://openprinting.github.io/cups/
rpm_license: LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-devel-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. This is the development package for creating
  additional printer drivers, and other CUPS services.


pkgId: 6ef53fad71724f39835c00bb9e8483bc65fee4643706cd1af0da8840a00ef320
name: cups-filesystem
arch: noarch
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - directory layout
url: https://openprinting.github.io/cups/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-filesystem-2.3.3op2-1.el7.noarch.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. This package provides some directories which are
  required by other packages that add CUPS drivers (i.e. filters, backends etc.).


pkgId: 9da358abf20df505a6f6b3c77fa5fcd230c2fd7aca6c60101ab242b63597111f
name: cups-filters
arch: i686
version: 1.28.13
epoch: 0
release: 3.el7
summary: OpenPrinting CUPS filters and backends
url: http://www.linuxfoundation.org/collaborate/workgroups/openprinting/cups-filters
rpm_license: GPLv2 and GPLv2+ and GPLv3 and GPLv3+ and LGPLv2+ and MIT and BSD with advertising
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cups-filters-1.28.13-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-filters-1.28.13-3.el7.i686.rpm
checksum_type: sha256
description:
  Contains backends, filters, and other software that was
  once part of the core CUPS distribution but is no longer maintained by
  Apple Inc. In addition it contains additional filters developed
  independently of Apple, especially filters for the PDF-centric printing
  workflow introduced by OpenPrinting.


pkgId: 6534e14f8cdf4e820717c3909f810e930182133d6dcfe863d46ad90cd1b5ef8b
name: cups-libs
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - libraries
url: https://openprinting.github.io/cups/
rpm_license: LGPLv2 and zlib
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-libs-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. It has been developed by Apple Inc.
  to promote a standard printing solution for all UNIX vendors and users.
  CUPS provides the System V and Berkeley command-line interfaces.
  The cups-libs package provides libraries used by applications to use CUPS
  natively, without needing the lp/lpr commands.


pkgId: 581cfcc6114d48c289ad719b7ac74915a849ec3153008892aa6d6c2a2c23f6d2
name: cups-lpd
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - lpd emulation
url: https://openprinting.github.io/cups/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-lpd-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  CUPS printing system provides a portable printing layer for
  UNIX® operating systems. This is the package that provides standard
  lpd emulation.


pkgId: 67df8f8711db2d1e279b60ad32e347cb8414941c23607fc4e72ee79201208953
name: cups-pdf
arch: i686
version: 3.0.1
epoch: 0
release: 7.el7.3
summary: Extension for creating pdf-Files with CUPS
url: http://www.cups-pdf.de/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-pdf-3.0.1-7.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: cups-pdf-3.0.1-7.el7.3.i686.rpm
checksum_type: sha256
description:
  "cups-pdf" is a backend script for use with CUPS - the "Common UNIX Printing
  System" (see more for CUPS under http://www.cups.org/).
  "cups-pdf" uses the ghostscript pdfwrite device to produce PDF Files.

  This version has been modified to store the PDF files on the Desktop of the
  user. This behavior can be changed by editing the configuration file.


pkgId: b5f2ba05e1e744223f7b7375b354bea38f372978c26fe174c1444a0005c116e5
name: cups-printerapp
arch: i686
version: 2.3.3op2
epoch: 1
release: 1.el7
summary: CUPS printing system - tools for printer application
url: https://openprinting.github.io/cups/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-2.3.3op2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-printerapp-2.3.3op2-1.el7.i686.rpm
checksum_type: sha256
description:
  Provides IPP everywhere printer application ippeveprinter and tools for printing
  PostScript and HP PCL document formats - ippevepcl and ippeveps. The printer
  application enables older printers for IPP everywhere standard - so if older printer
  is installed with a printer application, its print queue acts as IPP everywhere printer
  to CUPS daemon. This solution will substitute printer drivers and raw queues in the future.


pkgId: 37c1a965d241253e7766c674429f6b5b77d2750311c91ed53f64f0a4a9802ca9
name: cups-x2go
arch: noarch
version: 3.0.1.3
epoch: 0
release: 6.el7
summary: CUPS backend for printing from X2Go
url: http://www.x2go.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cups-x2go-3.0.1.3-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: cups-x2go-3.0.1.3-6.el7.noarch.rpm
checksum_type: sha256
description:
  X2Go is a server based computing environment with
      - session resuming
      - low bandwidth support
      - session brokerage support
      - client side mass storage mounting support
      - audio support
      - authentication by smartcard and USB stick

  CUPS backend for printing from X2Go.


pkgId: 6b1bc84fbac75a0ca978fe9791862ebdfd612916f4391e1285b36aac8cdb2608
name: curl
arch: i686
version: 7.72.0
epoch: 0
release: 5.el7
summary: A utility for getting files from remote servers (FTP, HTTP, and others)
url: https://curl.haxx.se/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: curl-7.72.0-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: curl-7.72.0-5.el7.i686.rpm
checksum_type: sha256
description:
  curl is a command line tool for transferring data with URL syntax, supporting
  FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP,
  SMTP, POP3 and RTSP.  curl supports SSL certificates, HTTP POST, HTTP PUT, FTP
  uploading, HTTP form based upload, proxies, cookies, user+password
  authentication (Basic, Digest, NTLM, Negotiate, kerberos...), file transfer
  resume, proxy tunneling and a busload of other useful tricks.


pkgId: c643eb6517e01dce77e88816c8ba060e71bb7ef541676b0ba8a28aba9d2f82d5
name: cvt
arch: i686
version: 0.1.2
epoch: 0
release: 1.el7
summary: Command line tool to calculate VESA CVT mode lines
url: https://gitlab.freedesktop.org/xorg/lib/libxcvt/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: libxcvt-0.1.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: cvt-0.1.2-1.el7.i686.rpm
checksum_type: sha256
description:
  A standalone version of the command line tool cvt copied from the Xorg
  implementation and is meant to be a direct replacement to the version
  provided by the Xorg server.


pkgId: 64b560326d6bcf2e79a1c829b267744768fdf8b334092a0dd3b81b99c8e0304b
name: cyrus-imapd
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: A high-performance email, contacts and calendar server
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  The Cyrus IMAP (Internet Message Access Protocol) server provides access to
  personal mail, system-wide bulletin boards, news-feeds, calendar and contacts
  through the IMAP, JMAP, NNTP, CalDAV and CardDAV protocols. The Cyrus IMAP
  server is a scalable enterprise groupware system designed for use from small to
  large enterprise environments using technologies based on well-established Open
  Standards.

  A full Cyrus IMAP implementation allows a seamless mail and bulletin board
  environment to be set up across one or more nodes. It differs from other IMAP
  server implementations in that it is run on sealed nodes, where users are not
  normally permitted to log in. The mailbox database is stored in parts of the
  filesystem that are private to the Cyrus IMAP system. All user access to mail
  is through software using the IMAP, IMAPS, JMAP, POP3, POP3S, KPOP, CalDAV
  and/or CardDAV protocols.

  The private mailbox database design gives the Cyrus IMAP server large
  advantages in efficiency, scalability, and administratability. Multiple
  concurrent read/write connections to the same mailbox are permitted. The server
  supports access control lists on mailboxes and storage quotas on mailbox
  hierarchies.


pkgId: b07eb9896f00ad813ac0ee62ee64dfb7cc282f6a3647240fb9e5a6db6b23edbe
name: cyrus-imapd-devel
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: Cyrus IMAP server development files
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-devel-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-imapd-devel package contains header files and libraries
  necessary for developing applications which use the imclient library.


pkgId: 6e20407add8b858bcb9140713a36c0b392904f863743fbeb5667517dcac77bbf
name: cyrus-imapd-doc-extra
arch: noarch
version: 3.0.13
epoch: 0
release: 4.el7
summary: Extra documentation for the Cyrus IMAP server
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-doc-extra-3.0.13-4.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the HTML documentation for the Cyrus IMAP server, as well
  as some legacy and internal documentation not useful for normal operation of
  the server.


pkgId: 82284bce1e6a0cae47705b916332c659a3ebb7508bd8fdabb2798efa94ca5c63
name: cyrus-imapd-libs
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: Runtime libraries for cyrus-imapd
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-libs-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-imapd-libs package contains libraries shared by the Cyrus IMAP server
  and the its utilities.


pkgId: 8875768953902271f8a5362865c8244431f61d22c55dd9b0c8d7d2585adfaa2d
name: cyrus-imapd-utils
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: Cyrus IMAP server administration utilities
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-utils-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-imapd-utils package contains administrative tools for the
  Cyrus IMAP server. It can be installed on systems other than the
  one running the server.


pkgId: b4abc638a6c89d1e28bc8a266c63cd2f46fd589eec5bad6763e66dcbde95a616
name: cyrus-imapd-virusscan
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: Cyrus virus scanning utility
url: http://www.cyrusimap.org/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-virusscan-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-imapd-virusscan package contains the cyr_virusscan utility.  It
  exists in a separate package so that users who do not wish to install all of
  the clamav suite don't have to.

  Install this package if you wish to use the internal cyrus virus scanning
  utility.


pkgId: dd7bb26b1344f4d2a19f77e19886db52156b9daa5cfd776bd17d35b2243862e7
name: cyrus-imapd-vzic
arch: i686
version: 3.0.13
epoch: 0
release: 4.el7
summary: Utilities to convert timezone database files
url: http://www.cyrusimap.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cyrus-imapd-3.0.13-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-imapd-vzic-3.0.13-4.el7.i686.rpm
checksum_type: sha256
description:
  vzic is a program to convert the Olson timezone database files into VTIMEZONE
  files compatible with the iCalendar specification (RFC2445).

  This package contains a forked version of vzic for internal use by the Cyrus
  IMAP server.


pkgId: da710e448d9f5d3a06b06f8c7ab0e9e7d32d7910253460a5878f6de5afd23d1e
name: cyrus-sasl
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: The Cyrus SASL library
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl package contains the Cyrus implementation of SASL.
  SASL is the Simple Authentication and Security Layer, a method for
  adding authentication support to connection-based protocols.


pkgId: 9dd7a9615c2870998ec9bcb189eab35cd35a1054dc66141d23fad0b29d219ee3
name: cyrus-sasl-devel
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: Files needed for developing applications with Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-devel-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-devel package contains files needed for developing and
  compiling applications which use the Cyrus SASL library.


pkgId: 73753695633fde9cf8bbb0173a9e281983efe9a28ad114d3f807503962ccba7c
name: cyrus-sasl-gs2
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: GS2 support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-gs2-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-gs2 package contains the Cyrus SASL plugin which supports
  the GS2 authentication scheme.


pkgId: 77213865d80af5fc34f28b0ff2693d6ad551976ac854388990248974b99879f5
name: cyrus-sasl-gssapi
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: GSSAPI authentication support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-gssapi-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-gssapi package contains the Cyrus SASL plugins which
  support GSSAPI authentication. GSSAPI is commonly used for Kerberos
  authentication.


pkgId: 8e7d5ef0b93e5ba0e6468e68fe9eb91cb3dc9689718d2718026e3cf71138ae94
name: cyrus-sasl-ldap
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: LDAP auxprop support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-ldap-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-ldap package contains the Cyrus SASL plugin which supports using
  a directory server, accessed using LDAP, for storing shared secrets.


pkgId: 8447c0ed40c0d1f48a19eea69b1e667112c35eb616488048353c5efffb0ae040
name: cyrus-sasl-lib
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: Shared libraries needed by applications which use Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-lib-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-lib package contains shared libraries which are needed by
  applications which use the Cyrus SASL library.


pkgId: 8207054a1db7ef9655d7188e80d2dab1e2311598067eb402556bad586d4d7299
name: cyrus-sasl-md5
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: CRAM-MD5 and DIGEST-MD5 authentication support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-md5-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-md5 package contains the Cyrus SASL plugins which support
  CRAM-MD5 and DIGEST-MD5 authentication schemes.


pkgId: bc874346f22a7322347bedc3a4989c18f0e7098a475c25e57c4b99c968b97d88
name: cyrus-sasl-ntlm
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: NTLM authentication support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-ntlm-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-ntlm package contains the Cyrus SASL plugin which supports
  the NTLM authentication scheme.


pkgId: 35b4f7ecac5943da2ca7a0c549e54212a38c683de35edc878b2ea0f638c121d6
name: cyrus-sasl-plain
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: PLAIN and LOGIN authentication support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-plain-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-plain package contains the Cyrus SASL plugins which support
  PLAIN and LOGIN authentication schemes.


pkgId: 3d66eb765719e6a1db190a871cbd2a89098d29053f68ce689a68041bf7213ce2
name: cyrus-sasl-scram
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: SCRAM auxprop support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-scram-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-scram package contains the Cyrus SASL plugin which supports
  the SCRAM authentication scheme.


pkgId: d357791d15265eb028ff58a6b2634c9cab298960681a68803ffe0b8372ceeeba
name: cyrus-sasl-sql
arch: i686
version: 2.1.27
epoch: 0
release: 5.el7
summary: SQL auxprop support for Cyrus SASL
url: https://www.cyrusimap.org/sasl/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: cyrus-sasl-2.1.27-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: cyrus-sasl-sql-2.1.27-5.el7.i686.rpm
checksum_type: sha256
description:
  The cyrus-sasl-sql package contains the Cyrus SASL plugin which supports
  using a RDBMS for storing shared secrets.


pkgId: 05999df0706458b780f959841f370639807c7ee6afa36d995aa6f52e3f314e4a
name: daala-devel
arch: i686
version: 0
epoch: 0
release: 11.20170616git7278368.el7
summary: Development files for the Daala video codec libraries
url: http://xiph.org/daala/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: daala-0-11.20170616git7278368.el7.src.rpm
rpm_packager: RED SOFT
location_href: daala-devel-0-11.20170616git7278368.el7.i686.rpm
checksum_type: sha256
description:
  The daala-devel package contains libraries and header files for developing
  applications that use daala.


pkgId: 48788aa29f41ce9015fc2693edc3acef4fb60684d8287f7651baac1c861bdac8
name: daala-libs
arch: i686
version: 0
epoch: 0
release: 11.20170616git7278368.el7
summary: Daala video codec libraries
url: http://xiph.org/daala/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: daala-0-11.20170616git7278368.el7.src.rpm
rpm_packager: RED SOFT
location_href: daala-libs-0-11.20170616git7278368.el7.i686.rpm
checksum_type: sha256
description:
  A new video compression technology. The goal of the project is to provide a
  video format that's free to implement, use and distribute, and a reference
  implementation with technical performance superior to H.265.


pkgId: 37993519ec3290c5cab9ba6ca8b8b92b4f917c3a43db8bff3b049b1bdfe9fcfc
name: daala-tools
arch: i686
version: 0
epoch: 0
release: 11.20170616git7278368.el7
summary: Daala video codec tools
url: http://xiph.org/daala/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: daala-0-11.20170616git7278368.el7.src.rpm
rpm_packager: RED SOFT
location_href: daala-tools-0-11.20170616git7278368.el7.i686.rpm
checksum_type: sha256
description:
  A new video compression technology. The goal of the project is to provide a
  video format that's free to implement, use and distribute, and a reference
  implementation with technical performance superior to H.265.

  The daala-tools package contains a test player and encoder plus programs for
  testing daala support in your applications.


pkgId: e6a3fee968c6705216aacfff3e3c6e1f2db113dbba886ad991234b5f9bcaabfc
name: dahdi-tools
arch: i686
version: 2.11.1
epoch: 0
release: 14.el7
summary: Userspace tools to configure the DAHDI kernel modules
url: http://www.asterisk.org/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dahdi-tools-2.11.1-14.el7.src.rpm
rpm_packager: RED SOFT
location_href: dahdi-tools-2.11.1-14.el7.i686.rpm
checksum_type: sha256
description:
  DAHDI stands for Digium Asterisk Hardware Device Interface. This
  package contains the userspace tools to configure the DAHDI kernel
  modules.  DAHDI is the replacement for Zaptel, which must be renamed
  due to trademark issues.


pkgId: ec759edfbae4366085ef78568ac2b6f1c9810300ddbb0db853ae8cd471e00f95
name: dahdi-tools-devel
arch: i686
version: 2.11.1
epoch: 0
release: 14.el7
summary: Development files for DAHDI
url: http://www.asterisk.org/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dahdi-tools-2.11.1-14.el7.src.rpm
rpm_packager: RED SOFT
location_href: dahdi-tools-devel-2.11.1-14.el7.i686.rpm
checksum_type: sha256
description:
  The dahdi-devel package contains libraries and header files for
  developing applications that use DAHDI hardware.


pkgId: 3d8f385b3da72dff18d5054c282bd3cc0a2e6664620225c2a8190656e776240b
name: dante
arch: i686
version: 1.4.4
epoch: 0
release: 1.el7
summary: A free SOCKS v4/v5 client implementation
url: https://www.inet.no/dante
rpm_license: BSD-Inferno-Nettverk
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dante-1.4.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dante-1.4.4-1.el7.i686.rpm
checksum_type: sha256
description:
  Dante is a free implementation of the SOCKS proxy protocol, version 4,
  and version 5 (rfc1928). It can be used as a firewall between
  networks. It is being developed by Inferno Nettverk A/S, a Norwegian
  consulting company. Commercial support is available.

  This package contains the dynamic libraries required to "socksify"
  existing applications, allowing them to automatically use the SOCKS
  protocol.


pkgId: 6922ea0825e1e315092cb079fac692cde6cbb221825b190e172f7cd5177dc35a
name: dante-server
arch: i686
version: 1.4.4
epoch: 0
release: 1.el7
summary: A free SOCKS v4/v5 server implementation
url: https://www.inet.no/dante
rpm_license: BSD-Inferno-Nettverk
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dante-1.4.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dante-server-1.4.4-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains "sockd", the SOCKS proxy daemon and its
  documentation.  This is the server part of the Dante SOCKS proxy
  package and allows SOCKS clients to connect through it to the external
  network.


pkgId: ccb64bccaeebdc00a21771d4e44b3563f14a8c0e8b201415efbd9a9747f4474f
name: darktable
arch: x86_64
version: 3.4.0
epoch: 0
release: 3.el7
summary: Utility to organize and develop raw images
url: http://www.darktable.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: appolo.red-soft.ru
rpm_sourcerpm: darktable-3.4.0-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: darktable-3.4.0-3.el7.x86_64.rpm
checksum_type: sha256
description:
  Darktable is a virtual light-table and darkroom for photographers:
  it manages your digital negatives in a database and lets you view them
  through a zoom-able light-table.
  It also enables you to develop raw images and enhance them.


pkgId: 9e69aa09070c71cf8684e655a4005bbf1e80af14e80e6a162fb0a1f9305874e3
name: darktable-tools-noise
arch: x86_64
version: 3.4.0
epoch: 0
release: 3.el7
summary: The noise profiling tools to support new cameras
url: http://www.darktable.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: appolo.red-soft.ru
rpm_sourcerpm: darktable-3.4.0-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: darktable-tools-noise-3.4.0-3.el7.x86_64.rpm
checksum_type: sha256
description:
  darktable is a virtual lighttable and darkroom for photographers: it manages
  your digital negatives in a database and lets you view them through a zoomable
  lighttable. it also enables you to develop raw images and enhance them.


pkgId: bdc4236af720d424141ce96b658243600641ca7c088340bd91a4ac9627d70013
name: datefudge
arch: i686
version: 1.22
epoch: 0
release: 1.el7
summary: Fake the system date
url: http://packages.qa.debian.org/d/datefudge.html
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: datefudge-1.22-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: datefudge-1.22-1.el7.i686.rpm
checksum_type: sha256
description:
  This program (and preload library) fakes the system date so that
  programs think the wall clock is ... different. The faking is not
  complete; time-stamp on files are not affected in any way. This
  package is useful if you want to test the date handling of your
  programs without changing the system clock.


pkgId: 2afb77b1d89f6146e890f26b8666dda8b0160739f691757846be3949964bf8a7
name: daxio
arch: x86_64
version: 1.10
epoch: 0
release: 3.el7
summary: Perform I/O on Device DAX devices or zero a Device DAX device
url: http://pmem.io/pmdk
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: nvml-1.10-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: daxio-1.10-3.el7.x86_64.rpm
checksum_type: sha256
description:
  The daxio utility performs I/O on Device DAX devices or zero
  a Device DAX device.  Since the standard I/O APIs (read/write) cannot be used
  with Device DAX, data transfer is performed on a memory-mapped device.
  The daxio may be used to dump Device DAX data to a file, restore data from
  a backup copy, move/copy data to another device or to erase data from
  a device.


pkgId: 44f60e94b0d165ad1c94b1a9bbdb3e74626e208fe7278250fadc92b54be4a038
name: dbeaver
arch: x86_64
version: 24.0.2
epoch: 0
release: 1.el7
summary: Universal Database Manager
url: https://dbeaver.io/
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbeaver-24.0.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbeaver-24.0.2-1.el7.x86_64.rpm
checksum_type: sha256
description:
  DBeaver is free and open source universal database tool for developers and database administrators.

  *  Usability is the main goal of this project, program UI is carefully designed and implemented.
  *  It is free and open-source (ASL).
  *  It is multiplatform.
  *  It is based on opensource framework and allows writing of various extensions (plugins).
  *  It supports any database having a JDBC driver.
  *  It may handle any external datasource which may or may not have a JDBC driver.
  *  There is a set of plugins for different databases and different database management utilities (e.g. ERD, data transfer, compare, data export/import, mock data generation, etc).
  *  It has a great number of features.


pkgId: e03de9a7aa36e48dd2bb24369215131eb8d1ae9162e87db141dc41c21a9f40de
name: dblatex
arch: noarch
version: 0.3.12
epoch: 0
release: 1.el7
summary: DocBook to LaTeX/ConTeXt Publishing
url: http://dblatex.sourceforge.net/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dblatex-0.3.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dblatex-0.3.12-1.el7.noarch.rpm
checksum_type: sha256
description:
  dblatex is a program that transforms your SGML/XMLDocBook
  documents to DVI, PostScript or PDF by translating them
  into pure LaTeX as a first process.  MathML 2.0 markups
  are supported, too. It started as a clone of DB2LaTeX.

  Authors:
  --------
     Benoît Guillon <marsgui at users dot sourceforge dot net>
     Andreas Hoenen <andreas dot hoenen at arcor dot de>

rpm_license:
  GPL-2.0-or-later AND GPL-2.0-only AND LPPL-1.3a AND LicenseRef-DMIT AND LicenseRef-Fedora-Public-Domain


pkgId: a67dbfa60e16fb2f4469b315edbb949953beb2dd76f1ff15fe5319462ea5841e
name: dbus
arch: i686
version: 1.12.16
epoch: 1
release: 7.el7
summary: D-BUS message bus
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-1.12.16-7.el7.i686.rpm
checksum_type: sha256
description:
  D-BUS is a system for sending messages between applications. It is
  used both for the system-wide message bus service, and as a
  per-user-login-session messaging facility.


pkgId: a780215d38d9e8f4148bf682cab5c226f46df1ad6021c5c578bc36d23c3f0877
name: dbus-common
arch: noarch
version: 1.12.16
epoch: 1
release: 7.el7
summary: D-BUS message bus configuration
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-common-1.12.16-7.el7.noarch.rpm
checksum_type: sha256
description:
  The dbus-common package provides the configuration and setup files for D-Bus
  implementations to provide a System and User Message Bus.


pkgId: 7d985ae08c21832c659fae5edcd9f4a1dbe8e56ce2442a1cbc7d51925921e884
name: dbus-doc
arch: noarch
version: 1.12.16
epoch: 1
release: 7.el7
summary: Developer documentation for D-BUS
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-doc-1.12.16-7.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains developer documentation for D-Bus along with
  other supporting documentation such as the introspect dtd file.


pkgId: c8fba8d12bd851cd23119cb5a3a6b05ce17563bea9e518fea4bcc188c024b95c
name: dbus-test-runner
arch: i686
version: 19.04.0
epoch: 0
release: 1.el7
summary: Utility to run executables under a new DBus session for testing
url: https://launchpad.net/dbus-test-runner
rpm_license: GPL-3.0-only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-test-runner-19.04.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-test-runner-19.04.0-1.el7.i686.rpm
checksum_type: sha256
description:
  dbus-test-runner is a simple little executable for running a couple of
  programs under a new DBus session.

  Use this DBus tool for unit testing of code that accesses DBus at runtime.


pkgId: d0903e8bdf924b7ce70c7954f0c15f94a1cde0c4d3a5cef785831c28f7cdaff1
name: dbus-tests
arch: i686
version: 1.12.16
epoch: 1
release: 7.el7
summary: Tests for the dbus-daemon package
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-tests-1.12.16-7.el7.i686.rpm
checksum_type: sha256
description:
  The dbus-tests package contains tests that can be used to verify
  the functionality of the installed dbus-daemon package.


pkgId: 3b27f4522f53cadef91257d7716506a790591f38d0df6ba526af435bb2368810
name: dbus-tools
arch: i686
version: 1.12.16
epoch: 1
release: 7.el7
summary: D-BUS Tools and Utilities
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-tools-1.12.16-7.el7.i686.rpm
checksum_type: sha256
description:
  Tools and utilities to interact with a running D-Bus Message Bus, provided by
  the reference implementation.


pkgId: d0da0f7ea50d546929c9ac6d0813df8296e9d1b3b4fcd1e4cce9835ea8b518a2
name: dbus-x11
arch: i686
version: 1.12.16
epoch: 1
release: 7.el7
summary: X11-requiring add-ons for D-BUS
url: http://www.freedesktop.org/Software/dbus/
rpm_license: (GPLv2+ or AFL) and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dbus-1.12.16-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: dbus-x11-1.12.16-7.el7.i686.rpm
checksum_type: sha256
description:
  D-BUS contains some tools that require Xlib to be installed, those are
  in this separate package so server systems need not install X.


pkgId: c914cabb9547615c567e9a6e2fdfc846ba05fae8c460cd19e7e2885c9f29e50c
name: dcmtk
arch: i686
version: 3.6.8
epoch: 0
release: 1.el7
summary: Offis DICOM Toolkit (DCMTK)
url: http://dicom.offis.de/dcmtk.php.en
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dcmtk-3.6.8-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dcmtk-3.6.8-1.el7.i686.rpm
checksum_type: sha256
description:
  DCMTK is a collection of libraries and applications implementing large
  parts the DICOM standard. It includes software for examining,
  constructing and converting DICOM image files, handling offline media,
  s4ending and receiving images over a network connection, as well as
  demonstrative image storage and worklist servers. DCMTK is is written
  in a mixture of ANSI C and C++.  It comes in complete source code and
  is made available as "open source" software. This package includes
  multiple fixes taken from the "patched DCMTK" project.

  Install DCMTK if you are working with DICOM format medical image files.


pkgId: 6548158c5dd282a4aaa7f74c8adb22ca15282c692f7ded2db2804de8a63e259d
name: dcmtk
arch: i686
version: 3.6.9
epoch: 0
release: 1.el7
summary: Offis DICOM Toolkit (DCMTK)
url: http://dicom.offis.de/dcmtk.php.en
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dcmtk-3.6.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dcmtk-3.6.9-1.el7.i686.rpm
checksum_type: sha256
description:
  DCMTK is a collection of libraries and applications implementing large
  parts the DICOM standard. It includes software for examining,
  constructing and converting DICOM image files, handling offline media,
  s4ending and receiving images over a network connection, as well as
  demonstrative image storage and worklist servers. DCMTK is is written
  in a mixture of ANSI C and C++. It comes in complete source code and
  is made available as "open source" software. This package includes
  multiple fixes taken from the "patched DCMTK" project.

  Install DCMTK if you are working with DICOM format medical image files.


pkgId: 378951bad07b958027801a623fba05beeaef2004eb35b0108e5438c94b60a9fd
name: dcmtk-devel
arch: i686
version: 3.6.8
epoch: 0
release: 1.el7
summary: Development Libraries and Headers for dcmtk
url: http://dicom.offis.de/dcmtk.php.en
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dcmtk-3.6.8-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dcmtk-devel-3.6.8-1.el7.i686.rpm
checksum_type: sha256
description:
  Development Libraries and Headers for dcmtk.  You only need to install
  this if you are developing programs that use the dcmtk libraries.


pkgId: 2cc6c0f00725b2ea4a29cca9402fc1ea7a1886b5429ce780c7c4087fe596622a
name: dcmtk-devel
arch: i686
version: 3.6.9
epoch: 0
release: 1.el7
summary: Development Libraries and Headers for dcmtk
url: http://dicom.offis.de/dcmtk.php.en
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dcmtk-3.6.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dcmtk-devel-3.6.9-1.el7.i686.rpm
checksum_type: sha256
description:
  Development Libraries and Headers for dcmtk. You only need to install
  this if you are developing programs that use the dcmtk libraries.


pkgId: 2f2e45b905ca59d287acf300d7d1ee38a7e5a8760e2e75f4b81acf388eabc0c6
name: deadbeef
arch: x86_64
version: 1.9.6
epoch: 0
release: 1.el7
summary: An audio player for GNU/Linux
url: https://deadbeef.sourceforge.io/
rpm_license: GPLv2+ and LGPLv2+ and BSD and MIT and zlib
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: deadbeef-1.9.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: deadbeef-1.9.6-1.el7.x86_64.rpm
checksum_type: sha256
description:
  DeaDBeeF (as in 0xDEADBEEF) is an audio player for GNU/Linux systems with X11
  (though now it also runs in plain console without X, in FreeBSD, and in
  OpenSolaris).


pkgId: 266e4cad85539d841e6f430aff00268efbcdc4beb4b8c015e1345e3c5bfc74c5
name: debmirror
arch: noarch
version: 2.37
epoch: 0
release: 1.el7
summary: Debian partial mirror script, with ftp and package pool support
url: https://tracker.debian.org/pkg/debmirror
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: debmirror-2.37-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: debmirror-2.37-1.el7.noarch.rpm
checksum_type: sha256
description:
  This program downloads and maintains a partial local Debian mirror.
  It can mirror any combination of architectures, distributions and
  sections. Files are transferred by ftp, http, hftp or rsync, and package
  pools are fully supported. It also does locking and updates trace files.


pkgId: 09d4465444a796e9db66d621dde9c5d3e3f14189f3b40872546ab3ffdd2fde68
name: deltaiso
arch: i686
version: 3.6.2
epoch: 0
release: 4.el7
summary: Create deltas between isos containing rpms
url: https://github.com/rpm-software-management/deltarpm
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: deltarpm-3.6.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: deltaiso-3.6.2-4.el7.i686.rpm
checksum_type: sha256
description:
  This package contains tools for creating and using deltasisos,
  a difference between an old and a new iso containing rpms.


pkgId: 0007a0d45aa8731df8c0affb297d7ca6f509ddbc6150b73bd1e324fbef8d2c1e
name: deltarpm
arch: i686
version: 3.6.2
epoch: 0
release: 4.el7
summary: Create deltas between rpms
url: https://github.com/rpm-software-management/deltarpm
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: deltarpm-3.6.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: deltarpm-3.6.2-4.el7.i686.rpm
checksum_type: sha256
description:
  A deltarpm contains the difference between an old
  and a new version of a rpm, which makes it possible
  to recreate the new rpm from the deltarpm and the old
  one. You don't have to have a copy of the old rpm,
  deltarpms can also work with installed rpms.


pkgId: fc38c5e818d3fb4e4572fdd1c0ecb391212ef3008540f4e74a52d8b9881d05ef
name: derby
arch: noarch
version: 10.16.1.2
epoch: 0
release: 1.el7
summary: Embeddable Database Engine Written in Java
url: https://db.apache.org/derby/
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Productivity/Databases/Servers
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: derby-10.16.1.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: derby-10.16.1.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  The Derby project develops open source database technology that is:

  - Pure Java
  - Easy to use
  - Small footprint
  - Standards based
  - Secure


pkgId: c35415ddbc650ffd6b84f71cd77203fb26292bb3fa0cd5d97c46609e640d639f
name: desktop-file-utils
arch: i686
version: 0.26
epoch: 0
release: 12.el7
summary: Utilities for manipulating .desktop files
url: https://www.freedesktop.org/software/desktop-file-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: desktop-file-utils-0.26-12.el7.src.rpm
rpm_packager: RED SOFT
location_href: desktop-file-utils-0.26-12.el7.i686.rpm
checksum_type: sha256
description:
  .desktop files are used to describe an application for inclusion in
  GNOME or KDE menus.  This package contains desktop-file-validate which
  checks whether a .desktop file complies with the specification at
  http://www.freedesktop.org/standards/, and desktop-file-install
  which installs a desktop file to the standard directory, optionally
  fixing it up in the process.


pkgId: 6b5de7e53b023d22fb73539b40a6dbf8614c74f703bb1750d0d62325d851f822
name: devel
arch: i686
version: 1.7.1
epoch: 0
release: 2.el7
summary: Development files for libnvme
url: https://github.com/linux-nvme/libnvme
rpm_license: LGPL-2.1-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: libnvme-1.7.1-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: devel-1.7.1-2.el7.i686.rpm
checksum_type: sha256
description:
  This package provides header files to include and libraries to link with
  for Linux-native nvme device management.


pkgId: 804e6d4a17d7d8e3e2d4f9c5f573ee5c9db1a0db0d53fb2ce394b0fdf694baef
name: device-mapper-event-devel
arch: i686
version: 1.02.181
epoch: 7
release: 9.el7
summary: Development libraries and headers for the device-mapper event daemon
url: http://sourceware.org/lvm2
rpm_license: LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: lvm2-2.03.14-9.el7.src.rpm
rpm_packager: RED SOFT
location_href: device-mapper-event-devel-1.02.181-9.el7.i686.rpm
checksum_type: sha256
description:
  This package contains files needed to develop applications that use
  the device-mapper event library.


pkgId: e649bd7f3d3c4132c5c5f96918165799e286464685251ab70841790878008df9
name: device-mapper-multipath
arch: i686
version: 0.8.4
epoch: 0
release: 5.el7
summary: Tools to manage multipath devices using device-mapper
url: http://christophe.varoqui.free.fr/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: device-mapper-multipath-0.8.4-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: device-mapper-multipath-0.8.4-5.el7.i686.rpm
checksum_type: sha256
description:
  device-mapper-multipath provides tools to manage multipath devices by
  instructing the device-mapper multipath kernel module what to do.
  The tools are :
  * multipath - Scan the system for multipath devices and assemble them.
  * multipathd - Detects when paths fail and execs multipath to update things.


pkgId: dae1c20a0ccc4ab7e8f67649ab8ca8f531b5a253cc2a925e12f7fb145e4517e7
name: device-mapper-multipath-devel
arch: i686
version: 0.8.4
epoch: 0
release: 5.el7
summary: Development libraries and headers for device-mapper-multipath
url: http://christophe.varoqui.free.fr/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: device-mapper-multipath-0.8.4-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: device-mapper-multipath-devel-0.8.4-5.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the files need to develop applications that use
  device-mapper-multipath's lbmpathpersist and libmpathcmd libraries.


pkgId: 5686742a1c220d106744f9ff7ba77a0291499681243f25d379b2b9f2ddf139c4
name: device-mapper-multipath-libs
arch: i686
version: 0.8.4
epoch: 0
release: 5.el7
summary: The device-mapper-multipath modules and shared library
url: http://christophe.varoqui.free.fr/
rpm_license: GPLv2 and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: device-mapper-multipath-0.8.4-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: device-mapper-multipath-libs-0.8.4-5.el7.i686.rpm
checksum_type: sha256
description:
  The device-mapper-multipath-libs provides the path checker
  and prioritizer modules. It also contains the libmpathpersist and
  libmpathcmd shared libraries, as well as multipath's internal library,
  libmultipath.


pkgId: bdce1b6342146ec81f427687ade2a5b05509be483501c765b6313eab795a9b9f
name: devilspie2
arch: i686
version: 0.44
epoch: 0
release: 1.el7
summary: A window-matching utility
url: http://www.nongnu.org/devilspie2/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: devilspie2-0.44-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: devilspie2-0.44-1.el7.i686.rpm
checksum_type: sha256
description:
  Devilspie2 is a window matching utility, allowing the user to perform scripted
  actions on windows as they are created. For example you can script a terminal
  program to always be positioned at a specific screen position, or position a
  window on a specific workspace. It is based on the program Devilspie by Ross
  Burton.


pkgId: d4ab13697d6eb070e21465fa2249ff76799636cc9fe4afed6a72e5333a66a69c
name: dhcp-client
arch: i686
version: 4.4.3
epoch: 12
release: 2.el7
summary: Provides the ISC DHCP client daemon and dhclient-script
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-client-4.4.3-2.el7.i686.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  This package provides the ISC DHCP client.


pkgId: aa623c4cabfa075408cffcb4256419868025d3771c2c955bde20a372cdd24dec
name: dhcp-common
arch: noarch
version: 4.4.3
epoch: 12
release: 2.el7
summary: Common files used by ISC dhcp client, server and relay agent
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-common-4.4.3-2.el7.noarch.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  This package provides common files used by dhcp and dhclient package.


pkgId: fbc60dd9a461eae3ea3462bb7c289545ff0cb43b9d0ce8df9d9c9a2c264af669
name: dhcp-devel
arch: i686
version: 4.4.3
epoch: 12
release: 2.el7
summary: Development headers and libraries for interfacing to the DHCP server
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-devel-4.4.3-2.el7.i686.rpm
checksum_type: sha256
description:
  Header files and API documentation for using the ISC DHCP libraries.  The
  libdhcpctl and libomapi static libraries are also included in this package.


pkgId: e07d47ada0888646cdc670289305bab14b3a6bae932b20201a3e752c96424de5
name: dhcp-devel-doc
arch: noarch
version: 4.4.3
epoch: 12
release: 2.el7
summary: Developer's Guide for ISC DHCP
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-devel-doc-4.4.3-2.el7.noarch.rpm
checksum_type: sha256
description:
  This documentation is intended for developers, contributors and other
  programmers that are interested in internal operation of the code.
  This package contains doxygen-generated documentation.


pkgId: 4379f1cd6b44f2ab124a62d7c2ac9a952a01f4ad2f84d3afb379566b008c474d
name: dhcp-keama
arch: i686
version: 4.4.3
epoch: 12
release: 2.el7
summary: Experimental migration assistant for Kea
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-keama-4.4.3-2.el7.i686.rpm
checksum_type: sha256
description:
  The KEA Migration Assistant is an experimental tool which helps to translate
  ISC DHCP configurations to Kea.


pkgId: 8d1e2f497f8dc4b5f2d6e469cdc101708812d1420dd2a6e3e71423de06509572
name: dhcp-relay
arch: i686
version: 4.4.3
epoch: 12
release: 2.el7
summary: Provides the ISC DHCP relay agent
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-relay-4.4.3-2.el7.i686.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  This package provides the ISC DHCP relay agent.


pkgId: 155f912b7d562a09e552bb52c9c22fc116bd7d900e27f07bc8f093b2227e1eba
name: dhcp-server
arch: i686
version: 4.4.3
epoch: 12
release: 2.el7
summary: Provides the ISC DHCP server
url: https://www.isc.org/dhcp/
rpm_license: ISC and MPLv2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dhcp-4.4.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dhcp-server-4.4.3-2.el7.i686.rpm
checksum_type: sha256
description:
  DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
  individual devices on an IP network to get their own network
  configuration information (IP address, subnetmask, broadcast address,
  etc.) from a DHCP server. The overall purpose of DHCP is to make it
  easier to administer a large network.

  This package provides the ISC DHCP server.


pkgId: 7e05be3b692ab14a712860755934f0057e6c5d336519c6de6bfd29b974bf09cd
name: digikam
arch: i686
version: 7.1.0
epoch: 0
release: 2.el7
summary: A digital camera accessing & photo management application
url: http://www.digikam.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: digikam-7.1.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: digikam-7.1.0-2.el7.i686.rpm
checksum_type: sha256
description:
  digiKam is an easy to use and powerful digital photo management application,
  which makes importing, organizing and manipulating digital photos a "snap".
  An easy to use interface is provided to connect to your digital camera,
  preview the images and download and/or delete them.

  digiKam built-in image editor makes the common photo correction a simple task.


pkgId: cf19aebe4f72082a612cd012defc2dbd668552d5ad18a79ac5be2792211c22cf
name: digikam-devel
arch: i686
version: 7.1.0
epoch: 0
release: 2.el7
summary: Development files for digikam
url: http://www.digikam.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: digikam-7.1.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: digikam-devel-7.1.0-2.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the libraries, include files and other resources
  needed to develop applications using digikam.


pkgId: 7891bcff5713e70339a43b1e795d0f593c0a5cce2261bc88968e5789063df8ae
name: dirac
arch: i686
version: 1.0.2
epoch: 0
release: 16.el7
summary: Dirac is an open source video codec
url: http://diracvideo.org
rpm_license: MPLv1.1
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dirac-1.0.2-16.el7.src.rpm
rpm_packager: RED SOFT
location_href: dirac-1.0.2-16.el7.i686.rpm
checksum_type: sha256
description:
  Dirac is an open source video codec. It uses a traditional hybrid video codec
  architecture, but with the wavelet transform instead of the usual block
  transforms.  Motion compensation uses overlapped blocks to reduce block
  artefacts that would upset the transform coding stage.


pkgId: 46289bfc60f4632e12d996079438527601d540e3a4a7c03490085a622eb03c29
name: discount
arch: i686
version: 2.2.4
epoch: 0
release: 1.el7
summary: A command-line utility for converting Markdown files into HTML
url: http://www.pell.portland.or.us/~orc/Code/discount
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: discount-2.2.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: discount-2.2.4-1.el7.i686.rpm
checksum_type: sha256
description:
  DISCOUNT is an implementation of John Gruber's Markdown language in C.
  It includes all of the original Markdown features, along with a few
  extensions, and passes the Markdown test suite.


pkgId: c4a9d7700c807e38a0a3b88b1047e2e5948a0b29ec861d195909b24d50c44402
name: dislocker
arch: i686
version: 0.7.3
epoch: 0
release: 2.el7
summary: Utility to access BitLocker encrypted volumes
url: https://github.com/Aorimn/dislocker
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dislocker-0.7.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dislocker-0.7.3-2.el7.i686.rpm
checksum_type: sha256
description:
  Dislocker has been designed to read BitLocker encrypted partitions ("drives")
  under a Linux system. The driver has the capability to read/write partitions
  encrypted using Microsoft Windows Vista, 7, 8, 8.1 and 10 (AES-CBC, AES-XTS,
  128 or 256 bits, with or without the Elephant diffuser, encrypted partitions);
  BitLocker-To-Go encrypted partitions (USB/FAT32 partitions).

  The file name where the BitLocker encrypted partition will be decrypted needs
  to be given. This may take a long time, depending on the size of the encrypted
  partition. But afterward, once the partition is decrypted, the access to the
  NTFS partition will be faster than with FUSE. Another thing to think about is
  the size of the disk (same size as the volume that is tried to be decrypted).
  Nevertheless, once the partition is decrypted, the file can be mounted as any
  NTFS partition and won't have any link to the original BitLocker partition.


pkgId: 2b05bc6383fdb4a3d1dfde9a7d01fe2822e6578b0aaf51b3ac40a236a1268129
name: dislocker-libs
arch: i686
version: 0.7.3
epoch: 0
release: 2.el7
summary: Libraries for applications using dislocker
url: https://github.com/Aorimn/dislocker
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dislocker-0.7.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dislocker-libs-0.7.3-2.el7.i686.rpm
checksum_type: sha256
description:
  The dislocker-libs package provides the essential shared libraries for any
  dislocker client program or interface.


pkgId: e7e1bcadf653aabd7b8abcda9e8c5aa2e14dded26719369aabfe8d35a0302df2
name: distrobox
arch: noarch
version: 1.8.1.2
epoch: 0
release: 2.el7
summary: Another tool for containerized command line environments on Linux
url: https://distrobox.it/
rpm_license: GPL-3.0-only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: distrobox-1.8.1.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: distrobox-1.8.1.2-2.el7.noarch.rpm
checksum_type: sha256
description:
  Use any linux distribution inside your terminal. Distrobox uses podman
  or docker to create containers using the linux distribution of your
  choice. Created container will be tightly integrated with the host,
  allowing to share the HOME directory of the user, external storage,
  external usb devices and graphical apps (X11/Wayland) and audio.


pkgId: 781f253621ade60301e9c5e3f4f0fa47c70630777bac80f7d68b214c84a5e718
name: djvulibre
arch: i686
version: 3.5.28
epoch: 0
release: 2.el7
summary: An Implementation of DjVu
url: http://djvu.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Productivity/Graphics/Other
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: djvulibre-3.5.28-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: djvulibre-3.5.28-2.el7.i686.rpm
checksum_type: sha256
description:
  DjVu is a web-centric format and software platform for distributing documents
  and images. DjVu can advantageously replace PDF, PS, TIFF, JPEG, and GIF for
  distributing scanned documents, digital documents, or high-resolution pictures.
  DjVu content downloads faster, displays and renders faster, looks nicer on a
  screen, and consume less client resources than competing formats. DjVu images
  display instantly and can be smoothly zoomed and panned with no lengthy
  re-rendering.

  DjVuLibre is a free (GPL'ed) implementation of DjVu, including viewers,
  decoders, simple encoders, and utilities. The browser plugin is in its own
  separate sub-package.


pkgId: 704880334840cd6b28feb0ac8743505b867d5cbfcfd24f636a408335c0388c1b
name: dkms
arch: noarch
version: 3.0.3
epoch: 0
release: 1.el7
summary: Dynamic Kernel Module Support Framework
url: http://linux.dell.com/dkms
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dkms-3.0.3-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dkms-3.0.3-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the framework for the Dynamic Kernel Module Support (DKMS)
  method for installing module RPMS as originally developed by Dell.


pkgId: 02263ca2b2ade6d2439bfe03b9c90d3104466c3c8cafc3afd35bde12c312006d
name: dmidecode
arch: i686
version: 3.5
epoch: 1
release: 1.el7
summary: Tool to analyse BIOS DMI data
url: https://www.nongnu.org/dmidecode/
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dmidecode-3.5-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dmidecode-3.5-1.el7.i686.rpm
checksum_type: sha256
description:
  dmidecode reports information about x86 & ia64 hardware as described in the
  system BIOS according to the SMBIOS/DMI standard. This information
  typically includes system manufacturer, model name, serial number,
  BIOS version, asset tag as well as a lot of other details of varying
  level of interest and reliability depending on the manufacturer.

  This will often include usage status for the CPU sockets, expansion
  slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of
  I/O ports (e.g. serial, parallel, USB).


pkgId: ceaffa45da3f0331b98f4fa38d7476b074a49817229325ea1014fac8187a70d8
name: dmraid
arch: i686
version: 1.0.0.rc16
epoch: 0
release: 34.el7
summary: dmraid (Device-mapper RAID tool and library)
url: http://people.redhat.com/heinzm/sw/dmraid
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dmraid-1.0.0.rc16-34.el7.src.rpm
rpm_packager: RED SOFT
location_href: dmraid-1.0.0.rc16-34.el7.i686.rpm
checksum_type: sha256
description:
  DMRAID supports RAID device discovery, RAID set activation, creation,
  removal, rebuild and display of properties for ATARAID/DDF1 metadata on
  Linux >= 2.4 using device-mapper.


pkgId: 32231e8cc975aebe9760cbac2093d81b4aa03cadb4c065c81a714c1cba63ab0b
name: dmraid-devel
arch: i686
version: 1.0.0.rc16
epoch: 0
release: 34.el7
summary: Development libraries and headers for dmraid.
url: http://people.redhat.com/heinzm/sw/dmraid
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dmraid-1.0.0.rc16-34.el7.src.rpm
rpm_packager: RED SOFT
location_href: dmraid-devel-1.0.0.rc16-34.el7.i686.rpm
checksum_type: sha256
description:
  dmraid-devel provides a library interface for RAID device discovery,
  RAID set activation and display of properties for ATARAID volumes.


pkgId: bf1c05b8aac07c85ee31766263cb7817f74487148b5496e28276175d93d1fe1f
name: dmraid-events
arch: i686
version: 1.0.0.rc16
epoch: 0
release: 34.el7
summary: dmevent_tool (Device-mapper event tool) and DSO
url: http://people.redhat.com/heinzm/sw/dmraid
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dmraid-1.0.0.rc16-34.el7.src.rpm
rpm_packager: RED SOFT
location_href: dmraid-events-1.0.0.rc16-34.el7.i686.rpm
checksum_type: sha256
description:
  Provides a dmeventd DSO and the dmevent_tool to register devices with it
  for device monitoring.  All active RAID sets should be manually registered
  with dmevent_tool.


pkgId: abb8be0e000a4420dff9734f0e73aef13ff65eedfe1599fc81b7482fd418784d
name: dmraid-events-logwatch
arch: i686
version: 1.0.0.rc16
epoch: 0
release: 34.el7
summary: dmraid logwatch-based email reporting
url: http://people.redhat.com/heinzm/sw/dmraid
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dmraid-1.0.0.rc16-34.el7.src.rpm
rpm_packager: RED SOFT
location_href: dmraid-events-logwatch-1.0.0.rc16-34.el7.i686.rpm
checksum_type: sha256
description:
  Provides device failure reporting via logwatch-based email reporting.
  Device failure reporting has to be activated manually by activating the
  /etc/cron.d/dmeventd-logwatch entry and by calling the dmevent_tool
  (see manual page for examples) for any active RAID sets.


pkgId: 0c1bce618d68bd39550d573d88db7b62fe32c2064558cbf395290049e1170602
name: dnf
arch: noarch
version: 4.17.0
epoch: 0
release: 1.el7
summary: Package manager
url: https://github.com/rpm-software-management/dnf
rpm_license: GPL-2.0-or-later AND GPL-1.0-only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnf-4.17.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-4.17.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Utility that allows users to manage packages on their systems.
  It supports RPMs, modules and comps groups & environments.


pkgId: d92d6ea135b7ca3eddc37619c59da032c3883e4187a55b2ce91216b553c6ef35
name: dnf-plugin-subscription-manager
arch: i686
version: 1.29.0
epoch: 0
release: 3.el7
summary: Subscription Manager plugins for DNF
url: http://www.candlepinproject.org/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: subscription-manager-1.29.0-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-plugin-subscription-manager-1.29.0-3.el7.i686.rpm
checksum_type: sha256
description:
  This package provides plugins to interact with repositories and subscriptions
  from the Red Hat entitlement platform; contains subscription-manager and
  product-id plugins.


pkgId: fcc8e04bf1f4fa717b7509ab471eba2577dec2d072fa6e77e97fb5048062e7ed
name: dnf-plugins-core
arch: noarch
version: 4.0.18
epoch: 0
release: 4.el7
summary: Core Plugins for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnf-plugins-core-4.0.18-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-plugins-core-4.0.18-4.el7.noarch.rpm
checksum_type: sha256
description:
  Core Plugins for DNF. This package enhances DNF with builddep, config-manager,
  debug, debuginfo-install, download, needs-restarting, repoclosure,
  repograph, repomanage, reposync, changelog and repodiff commands. Additionally
  provides generate_completion_cache passive plugin.


pkgId: 7f464aafffb9f96175580075234a3262e2fe205852c28b55a73edaae711ee137
name: dnf-plugins-core
arch: noarch
version: 4.4.2
epoch: 0
release: 1.el7
summary: Core Plugins for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnf-plugins-core-4.4.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-plugins-core-4.4.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  Core Plugins for DNF. This package enhances DNF with builddep, config-manager,
   debug, debuginfo-install, download, needs-restarting, groups-manager, repoclosure,
  repograph, repomanage, reposync, changelog and repodiff commands. Additionally
  provides generate_completion_cache passive plugin.


pkgId: 27bd2ac46e537cd9ee15d03ea314aade1557a8b0f1cbeb09f3558ab1b9c34e9e
name: dnf-utils
arch: noarch
version: 4.0.18
epoch: 0
release: 4.el7
summary: Yum-utils CLI compatibility layer
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnf-plugins-core-4.0.18-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-utils-4.0.18-4.el7.noarch.rpm
checksum_type: sha256
description:
  As a Yum-utils CLI compatibility layer, supplies in CLI shims for
  debuginfo-install, repograph, package-cleanup, repoclosure, repomanage,
  repoquery, reposync, repotrack, repodiff, builddep, config-manager, debug
  and download that use new implementations using DNF.


pkgId: 6239fdc28b1cd8479767bc3a153b51b42444f497e50eb9ca4a93d843da3131cd
name: dnf-utils
arch: noarch
version: 4.4.2
epoch: 0
release: 1.el7
summary: Yum-utils CLI compatibility layer
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnf-plugins-core-4.4.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnf-utils-4.4.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  As a Yum-utils CLI compatibility layer, supplies in CLI shims for
  debuginfo-install, repograph, package-cleanup, repoclosure, repomanage,
  repoquery, reposync, repotrack, repodiff, builddep, config-manager, debug,
  download and yum-groups-manager that use new implementations using DNF.


pkgId: 68dd859ae863b96b0b0e74e8dca8369e82022d104f5e12b0efd1bc7ac7d3f990
name: dnfdaemon-selinux
arch: noarch
version: 0.3.20
epoch: 0
release: 2.el7
summary: SELinux integration for the dnf-daemon
url: https://github.com/manatools/dnfdaemon
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: appolo.red-soft.ru
rpm_sourcerpm: dnfdaemon-0.3.20-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnfdaemon-selinux-0.3.20-2.el7.noarch.rpm
checksum_type: sha256
description:
  Metapackage customizing the SELinux policy to make the dnf-daemon work with
  SELinux enabled in enforcing mode.


pkgId: 6f199e1d278e1c407a562042b0e518b3e48e83cc0df19deb13f59ce56388541d
name: dnfdragora
arch: noarch
version: 2.1.1
epoch: 0
release: 10.el7
summary: DNF package-manager based on libYui abstraction
url: https://github.com/manatools/dnfdragora
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnfdragora-2.1.1-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnfdragora-2.1.1-10.el7.noarch.rpm
checksum_type: sha256
description:
  dnfdragora is a DNF frontend, based on rpmdragora from Mageia
  (originally rpmdrake) Perl code.

  dnfdragora is written in Python 3 and uses libYui, the widget
  abstraction library written by SUSE, so that it can be run
  using Qt 5, GTK+ 3, or ncurses interfaces.


pkgId: effa4d9603c1ca378afd70b3f13da1d8beaa7060dcc655710e189025b9f8cfde
name: dnfdragora-updater
arch: noarch
version: 2.1.1
epoch: 0
release: 10.el7
summary: Update notifier applet for dnfdragora
url: https://github.com/manatools/dnfdragora
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnfdragora-2.1.1-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnfdragora-updater-2.1.1-10.el7.noarch.rpm
checksum_type: sha256
description:
  dnfdragora is a DNF frontend, based on rpmdragora from Mageia
  (originally rpmdrake) Perl code.

  dnfdragora is written in Python 3 and uses libYui, the widget
  abstraction library written by SUSE, so that it can be run
  using Qt 5, GTK+ 3, or ncurses interfaces.

  This package provides the update notifier applet for dnfdragora.


pkgId: 06c4dfbf1d67bd2d38f7e6d1a046b95f7ab6d0dc21a18a36b87ce163c42c2adb
name: dnsdist
arch: x86_64
version: 1.8.3
epoch: 0
release: 2.el7
summary: Highly DNS-, DoS- and abuse-aware loadbalancer
url: https://dnsdist.org
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsdist-1.8.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsdist-1.8.3-2.el7.x86_64.rpm
checksum_type: sha256
description:
  dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life
  is to route traffic to the best server, delivering top performance to
  legitimate users while shunting or blocking abusive traffic.


pkgId: 6396a1c2713758d5a8c737e99aeb893d7b01d394e8abdb3ee67cad7601aa9895
name: dnsjava
arch: noarch
version: 2.1.3
epoch: 0
release: 13.el7
summary: Java DNS implementation
url: http://www.dnsjava.org/
rpm_license: BSD and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsjava-2.1.3-13.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsjava-2.1.3-13.el7.noarch.rpm
checksum_type: sha256
description:
  dnsjava is an implementation of DNS in Java. It supports all of the common
  record types and the DNSSEC types. It can be used for queries, zone transfers,
  and dynamic updates. It includes a cache which can be used by clients, and a
  minimal implementation of a server. It supports TSIG authenticated messages,
  partial DNSSEC verification, and EDNS0.

  dnsjava provides functionality above and beyond that of the InetAddress class.
  Since it is written in pure Java, dnsjava is fully threadable, and in many
  cases is faster than using InetAddress.

  dnsjava provides both high and low level access to DNS. The high level
  functions perform queries for records of a given name, type, and class, and
  return an array of records. There is also a clone of InetAddress, which is
  even simpler. A cache is used to reduce the number of DNS queries sent. The
  low level functions allow direct manipulation of dns messages and records, as
  well as allowing additional resolver properties to be set.

  A 'dig' clone and a dynamic update program are included, as well as a
  primary-only server.


pkgId: 7f216e82cb95394e3f1cb0dc77b9b8364077950e46b155d4d01d12b8c8dc77c7
name: dnsmasq
arch: i686
version: 2.85
epoch: 0
release: 4.el7
summary: A lightweight DHCP/caching DNS server
url: http://www.thekelleys.org.uk/dnsmasq/
rpm_license: GPLv2 or GPLv3
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsmasq-2.85-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsmasq-2.85-4.el7.i686.rpm
checksum_type: sha256
description:
  Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server.
  It is designed to provide DNS and, optionally, DHCP, to a small network.
  It can serve the names of local machines which are not in the global
  DNS. The DHCP server integrates with the DNS server and allows machines
  with DHCP-allocated addresses to appear in the DNS with names configured
  either in each host or in a central configuration file. Dnsmasq supports
  static and dynamic DHCP leases and BOOTP for network booting of diskless
  machines.


pkgId: 0c3817b92649a11beb912a8e43291e9dd29c65d1a4615dd81ccda3114af97c6a
name: dnsmasq
arch: i686
version: 2.90
epoch: 0
release: 2.el7
summary: A lightweight DHCP/caching DNS server
url: http://www.thekelleys.org.uk/dnsmasq/
rpm_license: GPL-2.0-only OR GPL-3.0-only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsmasq-2.90-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsmasq-2.90-2.el7.i686.rpm
checksum_type: sha256
description:
  Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server.
  It is designed to provide DNS and, optionally, DHCP, to a small network.
  It can serve the names of local machines which are not in the global
  DNS. The DHCP server integrates with the DNS server and allows machines
  with DHCP-allocated addresses to appear in the DNS with names configured
  either in each host or in a central configuration file. Dnsmasq supports
  static and dynamic DHCP leases and BOOTP for network booting of disk-less
  machines.


pkgId: bfd0c58146f584322120421bb4db4ecf3feef06091e585688f70730bdcceb96d
name: dnsperf
arch: i686
version: 2.14.0
epoch: 0
release: 1.el7
summary: Benchmarking authorative and recursing DNS servers
url: https://www.dns-oarc.net/tools/dnsperf
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsperf-2.14.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsperf-2.14.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This is dnsperf, a collection of DNS server performance testing tools.
  For more information, see the dnsperf(1) and resperf(1) man pages.


pkgId: e964c0451a860832955983d9af3668d6003b3fecb2fc77ef934b8b7ad905b5d0
name: dnsperf-queryparse
arch: noarch
version: 2.14.0
epoch: 0
release: 1.el7
summary: Pcap dns query extraction utility
url: https://www.dns-oarc.net/tools/dnsperf
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dnsperf-2.14.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dnsperf-queryparse-2.14.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  This is dnsperf, a collection of DNS server performance testing tools.

  Provides queryparse, python utility extracting queries from pcap files,
  such as recorded by tcpdump or wireshark. Prints output in format
  useable by dnsperf and resperf.


pkgId: ce8b9e6b6e6fe2b44c997d221dcfa67c97646a7542f3f7ffa5ee103bfc82c259
name: docbook-dtds
arch: noarch
version: 1.0
epoch: 0
release: 82.el7
summary: SGML and XML document type definitions for DocBook
url: http://www.oasis-open.org/docbook/
rpm_license: Copyright only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docbook-dtds-1.0-82.el7.src.rpm
rpm_packager: RED SOFT
location_href: docbook-dtds-1.0-82.el7.noarch.rpm
checksum_type: sha256
description:
  The DocBook Document Type Definition (DTD) describes the syntax of
  technical documentation texts (articles, books and manual pages).
  This syntax is XML-compliant and is developed by the OASIS consortium.
  This package contains SGML and XML versions of the DocBook DTD.


pkgId: 12e3bf897cdaf47ec6af9f569b64241d661c9476e96516c7e98f98b584b01021
name: docker-ce
arch: i686
version: 20.10.10
epoch: 3
release: 1.el7
summary: The open-source application container engine
url: https://www.docker.com
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-ce-20.10.10-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-ce-20.10.10-1.el7.i686.rpm
checksum_type: sha256
description:
  Docker is a product for you to build, ship and run any application as a
  lightweight container.

  Docker containers are both hardware-agnostic and platform-agnostic. This means
  they can run anywhere, from your laptop to the largest cloud compute instance and
  everything in between - and they don't require you to use a particular
  language, framework or packaging system. That makes them great building blocks
  for deploying and scaling web apps, databases, and backend services without
  depending on a particular stack or provider.


pkgId: b180364e85f9fac36a4e7f92083cc5aec303ef8c43f8809d94f27444788eb8c1
name: docker-ce-cli
arch: i686
version: 20.10.10
epoch: 1
release: 1.el7
summary: The open-source application container engine
url: https://www.docker.com
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-ce-cli-20.10.10-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-ce-cli-20.10.10-1.el7.i686.rpm
checksum_type: sha256
description:
  Docker is is a product for you to build, ship and run any application as a
  lightweight container.

  Docker containers are both hardware-agnostic and platform-agnostic. This means
  they can run anywhere, from your laptop to the largest cloud compute instance and
  everything in between - and they don't require you to use a particular
  language, framework or packaging system. That makes them great building blocks
  for deploying and scaling web apps, databases, and backend services without
  depending on a particular stack or provider.


pkgId: 0c6cd71e53d4ceae3887fc83c75c8f070ea59928f1379069c14fe5177f9b5da2
name: docker-ce-rootless-extras
arch: i686
version: 20.10.10
epoch: 0
release: 1.el7
summary: Rootless support for Docker
url: https://docs.docker.com/engine/security/rootless/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-ce-rootless-extras-20.10.10-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-ce-rootless-extras-20.10.10-1.el7.i686.rpm
checksum_type: sha256
description:
  Rootless support for Docker.
  Use dockerd-rootless.sh to run the daemon.
  Use dockerd-rootless-setuptool.sh to setup systemd for dockerd-rootless.sh .
  This package contains RootlessKit, but does not contain VPNKit.
  Either VPNKit or slirp4netns (>= 0.4.0) needs to be installed separately.


pkgId: 78457f93b33b27de782dd5487e67a911ca01d191b6bdb72a4a9f69e3e74aac4c
name: docker-ce-rootless-extras
arch: noarch
version: 24.0.9
epoch: 4
release: 1.el7
summary: Rootless support for docker-ce
url: https://www.docker.com
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-ce-24.0.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-ce-rootless-extras-24.0.9-1.el7.noarch.rpm
checksum_type: sha256
description:
  Rootless support for docker-ce.
  Use dockerd-rootless.sh to run the daemon.
  Use dockerd-rootless-setuptool.sh to setup systemd for dockerd-rootless.sh .
  This package contains RootlessKit, but does not contain VPNKit.
  Either VPNKit or slirp4netns (>= 0.4.0) needs to be installed separately.


pkgId: ca013e29137d37893f55c05cb73030308682d2b87c72f7017f6527321f78a014
name: docker-compose
arch: noarch
version: 1.28.2
epoch: 0
release: 2.el7
summary: Multi-container orchestration for Docker
url: https://github.com/docker/compose
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-compose-1.28.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-compose-1.28.2-2.el7.noarch.rpm
checksum_type: sha256
description:
  Compose is a tool for defining and running multi-container Docker
  applications. With Compose, you use a Compose file to configure your
  application's services. Then, using a single command, you create and
  start all the services from your configuration.

  Compose is great for development, testing, and staging environments,
  as well as CI workflows.

  Using Compose is basically a three-step process.

  1. Define your app's environment with a Dockerfile so it can be
     reproduced anywhere.
  2. Define the services that make up your app in docker-compose.yml so
     they can be run together in an isolated environment:
  3. Lastly, run docker-compose up and Compose will start and run your
     entire app.


pkgId: c81f399c818ea08eb1bceff053fcd86d96871bdd2d6ce7657dfdc3d53917e8eb
name: docker-compose
arch: i686
version: 2.11.2
epoch: 0
release: 1.el7
summary: Define and run multi-container applications with Docker
url: https://github.com/docker/compose
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-compose-2.11.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-compose-2.11.2-1.el7.i686.rpm
checksum_type: sha256
description:
  Docker Compose is a tool for running multi-container applications on Docker defined using
  the Compose file format. A Compose file is used to define how the one or more containers
  that make up your application are configured. Once you have a Compose file, you can create
  and start your application with a single command: docker compose up.

  About update and backward compatibility

  Docker Compose V2 is a major version bump release of Docker Compose. It has been completely
  rewritten from scratch in Golang (V1 was in Python). The installation instructions for
  Compose V2 differ from V1. V2 is not a standalone binary anymore, and installation scripts
  will have to be adjusted. Some commands are different.

  For a smooth transition from legacy docker-compose 1.xx, please consider installing compose-switch
  to translate docker-compose commands into Compose V2's docker compose.
  Also check V2's --compatibility flag.


pkgId: 8fdee3f48fc2989ee0e3495270c1fe518b681f53fa5f0117f56c8ec17faef90a
name: docker-compose
arch: i686
version: 2.40.2
epoch: 0
release: 1.el7
summary: Define and run multi-container applications with Docker
url: https://github.com/docker/compose
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: docker-compose-2.40.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: docker-compose-2.40.2-1.el7.i686.rpm
checksum_type: sha256
description:
  Docker Compose is a tool for running multi-container applications on Docker defined using
  the Compose file format. A Compose file is used to define how the one or more containers
  that make up your application are configured. Once you have a Compose file, you can create
  and start your application with a single command: 'docker compose up'.


pkgId: 1b139db711c2041ac2a6bc789be30f8a8407fd40876e0988748201ab0e56cc09
name: dogtag-jss
arch: i686
version: 5.3.0
epoch: 0
release: 2.el7
summary: Java Security Services (JSS)
url: https://github.com/dogtagpki/jss
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: jss-5.3.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dogtag-jss-5.3.0-2.el7.i686.rpm
checksum_type: sha256
description:
  Java Security Services (JSS) is a java native interface which provides a bridge
  for java-based applications to use native Network Security Services (NSS).
  This only works with gcj. Other JREs require that JCE providers be signed.


pkgId: fe581fc105eccc5c5948ff64a761d14d214bdb0b562a739a70516f87fc4b4176
name: dogtag-ldapjdk
arch: noarch
version: 5.3.0
epoch: 0
release: 2.el7
summary: LDAP SDK
url: https://github.com/dogtagpki/ldap-sdk
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ldapjdk-5.3.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dogtag-ldapjdk-5.3.0-2.el7.noarch.rpm
checksum_type: sha256
description:
  The Mozilla LDAP SDKs enable you to write applications which access,
  manage, and update the information stored in an LDAP directory.

  MPLv1.1 or GPLv2+ or LGPLv2+ docs/ldapjdk/license.txt


pkgId: a4692b37978687db8264c03f65297c35ef24f6d0295f7593df43eeac6b8a7c1c
name: dogtag-pki-console-theme
arch: noarch
version: 10.10.5
epoch: 0
release: 2.el7
summary: Dogtag PKI Console Theme Package
url: https://www.dogtagpki.org
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: pki-core-10.10.5-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dogtag-pki-console-theme-10.10.5-2.el7.noarch.rpm
checksum_type: sha256
description:
  This PKI Console Theme Package contains
  Dogtag textual and graphical user interface for PKI Console.


pkgId: 54db158e16e21ac0a7353adb5c89e88cecda662523d9d02cc38ef40507d94afc
name: dogtag-tomcatjss
arch: noarch
version: 8.2.0
epoch: 0
release: 3.el7
summary: JSS Connector for Apache Tomcat
url: https://github.com/dogtagpki/tomcatjss
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: tomcatjss-8.2.0-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dogtag-tomcatjss-8.2.0-3.el7.noarch.rpm
checksum_type: sha256
description:
  JSS Connector for Apache Tomcat, installed via the tomcatjss package,
  is a Java Secure Socket Extension (JSSE) module for Apache Tomcat that
  uses Java Security Services (JSS), a Java interface to Network Security
  Services (NSS).


pkgId: 4f9e304c8a640303a73084ca10e4662f4b6fa8f0ddb049da81a91ce69eae07ce
name: dom4j
arch: noarch
version: 2.2.0
epoch: 0
release: 1.el7
summary: Open Source XML framework for Java
url: https://dom4j.github.io
rpm_license: BSD-3-Clause
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dom4j-2.2.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dom4j-2.2.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  dom4j is an Open Source XML framework for Java. dom4j allows you to read,
  write, navigate, create and modify XML documents. dom4j integrates with
  DOM and SAX and is seamlessly integrated with full XPath support.


pkgId: b6d0c09d9ef7d3f2eac0986c75e448c75bf0e197c5e60ac3740e4722c9147919
name: dotnet
arch: x86_64
version: 6.0.125
epoch: 0
release: 3.el7
summary: .NET CLI tools and runtime
url: https://github.com/dotnet/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet6.0-6.0.125-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-6.0.125-3.el7.x86_64.rpm
checksum_type: sha256
description:
  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, macOS and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

  .NET contains a runtime conforming to .NET Standards a set of
  framework libraries, an SDK containing compilers and a 'dotnet'
  application to drive everything.

rpm_license:
[cell repeats an earlier one in this file: 119 characters]


pkgId: d30145a7fa7088beeced8cc3d1cc89a806d3f70659c9ba9986dd2144fba8e5be
name: dotnet-apphost-pack-10.0
arch: x86_64
version: 10.0.1
epoch: 0
release: 2.el7
summary: Targeting Pack for Microsoft.NETCore.App 10.0
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-apphost-pack-10.0-10.0.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a targeting pack for Microsoft.NETCore.App 10.0
  that allows developers to compile against and target Microsoft.NETCore.App 10.0
  applications using the .NET SDK.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 0c402b1b91cb1361220721f27831ef3f25316795ad459b91e0ddbc86b3404e10
name: dotnet-apphost-pack-6.0
arch: x86_64
version: 6.0.25
epoch: 0
release: 3.el7
summary: Targeting Pack for Microsoft.NETCore.App 6.0
url: https://github.com/dotnet/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet6.0-6.0.125-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-apphost-pack-6.0-6.0.25-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a targeting pack for Microsoft.NETCore.App 6.0
  that allows developers to compile against and target Microsoft.NETCore.App 6.0
  applications using the .NET SDK.

rpm_license:
[cell repeats an earlier one in this file: 119 characters]


pkgId: 25b103befdab5bbac0d659a1a1d55b85a8bde760d3cbccfa2d2f0a662de4ba83
name: dotnet-apphost-pack-7.0
arch: x86_64
version: 7.0.20
epoch: 0
release: 2.el7
summary: Targeting pack for Microsoft.NETCore.App 7.0
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet7.0-7.0.120-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-apphost-pack-7.0-7.0.20-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a targeting pack for Microsoft.NETCore.App 7.0
  that allows developers to compile against and target Microsoft.NETCore.App 7.0
  applications using the .NET SDK.

rpm_license:
  0BSD AND Apache-2.0 AND (Apache-2.0 WITH LLVM-Exception) AND APSL-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause AND BSL-1.0 AND bzip2-1.0.6 AND CC0-1.0 AND CC-BY-3.0 AND CC-BY-4.0 AND CC-PDDC AND CNRI-Python AND EPL-1.0 AND GPL-2.0-only AND (GPL-2.0-only WITH GCC-exception-2.0) AND GPL-2.0-or-later AND GPL-3.0-only AND ICU AND ISC AND LGPL-2.1-only AND LGPL-2.1-or-later AND LicenseRef-Fedora-Public-Domain AND LicenseRef-ISO-8879 AND MIT AND MIT-Wu AND MS-PL AND MS-RL AND NCSA AND OFL-1.1 AND OpenSSL AND Unicode-DFS-2015 AND Unicode-DFS-2016 AND W3C-19980720 AND X11 AND Zlib


pkgId: a760f4c041f327db65124db51cdac39957adcc09200239e19daf7e93c2537cdc
name: dotnet-apphost-pack-8.0
arch: x86_64
version: 8.0.0
epoch: 0
release: 3.el7
summary: Targeting Pack for Microsoft.NETCore.App 8.0
url: https://github.com/dotnet/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet8.0-8.0.100-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-apphost-pack-8.0-8.0.0-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a targeting pack for Microsoft.NETCore.App 8.0
  that allows developers to compile against and target Microsoft.NETCore.App 8.0
  applications using the .NET SDK.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: ca873779f1ed7799f29025596dc594a4b78213f1e596a9d6ee419581328d9daa
name: dotnet-apphost-pack-9.0
arch: x86_64
version: 9.0.6
epoch: 0
release: 2.el7
summary: Targeting Pack for Microsoft.NETCore.App 9.0.
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet9.0-9.0.107-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-apphost-pack-9.0-9.0.6-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides a targeting pack for Microsoft.NETCore.App 9.0
  that allows developers to compile against and target Microsoft.NETCore.App 9.0
  applications using the .NET SDK.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 4c09f0f9a3306ec11e8647c3ec148411230091732dfd009070f788862b6e9eb1
name: dotnet-host
arch: x86_64
version: 10.0.1
epoch: 0
release: 2.el7
summary: .NET command line launcher
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-host-10.0.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET host is a command line program that runs a standalone
  .NET application or launches the SDK.

  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, Mac and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: f1f9936f8b9b49ea1f5f8b735eb91edf208ab3611439a92ac3cb1165e7d71d3a
name: dotnet-hostfxr-10.0
arch: x86_64
version: 10.0.1
epoch: 0
release: 2.el7
summary: .NET command line host resolver
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-hostfxr-10.0-10.0.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET host resolver contains the logic to resolve and select
  the right version of the .NET SDK or runtime to use.

  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, Mac and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 1eed01f4966b68496ca62a15d7369de545c4fd347d86a860c630b124f16c4a99
name: dotnet-runtime-10.0
arch: x86_64
version: 10.0.1
epoch: 0
release: 2.el7
summary: .NET 10.0 runtime
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-runtime-10.0-10.0.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET runtime contains everything needed to run .NET applications.
  It includes a high performance Virtual Machine as well as the framework
  libraries used by .NET applications.

  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, Mac and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: cc71c92852b5a1ae0ed5d2354229ba2d14b7cc1136e849fbc07cfe75f2bf8a31
name: dotnet-runtime-dbg-10.0
arch: x86_64
version: 10.0.1
epoch: 0
release: 2.el7
summary: Managed debug symbols NET 10.0 runtime
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-runtime-dbg-10.0-10.0.1-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the managed symbol (pdb) files useful to debug the
  managed parts of the .NET runtime itself.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: abe02684b378b6b62f614641cf6e33fca54df0f0c8bdb1b54cf984d4ee45b115
name: dotnet-sdk-10.0
arch: x86_64
version: 10.0.101
epoch: 0
release: 2.el7
summary: .NET 10.0 Software Development Kit
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-sdk-10.0-10.0.101-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET SDK is a collection of command line applications to
  create, build, publish and run .NET applications.

  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, Mac and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 4ca042fe32bf632f24ba438113c29b33bf6b8d2e16d572051d3bdd4fb793bbaa
name: dotnet-sdk-10.0-source-built-artifacts
arch: x86_64
version: 10.0.101
epoch: 0
release: 2.el7
summary: Internal package for building .NET 10.0 Software Development Kit
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-sdk-10.0-source-built-artifacts-10.0.101-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET source-built archive is a collection of packages needed
  to build the .NET SDK itself. These are not meant for general use.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 46be601227e3bd531826c73a97796424d028630b516ee4d25c399201d013b8f9
name: dotnet-sdk-7.0-source-built-artifacts
arch: x86_64
version: 7.0.120
epoch: 0
release: 2.el7
summary: Internal package for building .NET 7.0 Software Development Kit
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet7.0-7.0.120-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-sdk-7.0-source-built-artifacts-7.0.120-2.el7.x86_64.rpm
checksum_type: sha256
description:
  The .NET source-built archive is a collection of packages needed
  to build the .NET SDK itself.

  These are not meant for general use.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: b614d9c36bda1ef4f3ad38e86e7e5946d4416f230f439575b77f9d7b84bbcabe
name: dotnet-sdk-dbg-10.0
arch: x86_64
version: 10.0.101
epoch: 0
release: 2.el7
summary: Managed debug symbols for the .NET 10.0 Software Development Kit
url: https://github.com/dotnet
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet10.0-10.0.101-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-sdk-dbg-10.0-10.0.101-2.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains the managed symbol (pdb) files useful to debug the .NET
  Software Development Kit (SDK) itself.

rpm_license:
[cell repeats an earlier one in this file: 589 characters]


pkgId: 2376fe34ad978dcb8805b42e305b8fb24c2ab9e81de3171eb2936dfae8d4be97
name: dotnet-templates-6.0
arch: x86_64
version: 6.0.125
epoch: 0
release: 3.el7
summary: .NET 6.0 templates
url: https://github.com/dotnet/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dotnet6.0-6.0.125-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dotnet-templates-6.0-6.0.125-3.el7.x86_64.rpm
checksum_type: sha256
description:
  This package contains templates used by the .NET SDK.

  .NET is a fast, lightweight and modular platform for creating
  cross platform applications that work on Linux, Mac and Windows.

  It particularly focuses on creating console applications, web
  applications and micro-services.

rpm_license:
[cell repeats an earlier one in this file: 119 characters]


pkgId: c457991861c64c7797f9689e7b3a7e0a1106f464df46158772a2c4f88f1c73ab
name: double-conversion
arch: i686
version: 3.1.5
epoch: 0
release: 3.el7
summary: Library providing binary-decimal and decimal-binary routines for IEEE doubles
url: https://github.com/google/double-conversion
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: double-conversion-3.1.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: double-conversion-3.1.5-3.el7.i686.rpm
checksum_type: sha256
description:
  Provides binary-decimal and decimal-binary routines for IEEE doubles.
  The library consists of efficient conversion routines that have been
  extracted from the V8 JavaScript engine. The code has been re-factored
  and improved so that it can be used more easily in other projects.


pkgId: 80141228187efb03ce99d27bea7c7ef5c9451016443c06f4b9633828d86b508b
name: double-conversion-devel
arch: i686
version: 3.1.5
epoch: 0
release: 3.el7
summary: Library providing binary-decimal and decimal-binary routines for IEEE doubles
url: https://github.com/google/double-conversion
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: double-conversion-3.1.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: double-conversion-devel-3.1.5-3.el7.i686.rpm
checksum_type: sha256
description:
  Contains header files for developing applications that use the double-conversion
  library.

  There is extensive documentation in src/double-conversion.h. Other
  examples can be found in test/cctest/test-conversions.cc.


pkgId: d4e03458679baeccbe1f013351fa1b96c5fa66677f1396e95a8df8c992f91f8e
name: doublecmd-common
arch: i686
version: 1.1.19
epoch: 0
release: 1.el7
summary: Common files for Double Commander.
description: Common files for Double Commander GTK2 and Qt.
url: http://doublecmd.sourceforge.net
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: doublecmd-1.1.19-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: doublecmd-common-1.1.19-1.el7.i686.rpm
checksum_type: sha256
rpm_license:
  GPL-2.0-or-later AND LGPL-2.0-or-later AND MIT AND MPL-1.1 AND MPL-2.0 AND Apache-2.0 AND BSD-2-Clause AND Zlib


pkgId: 1049f04631caef79e2a2ccaa49955848f23df84740059516babd03d8c1a4d3e4
name: doublecmd-gtk
arch: i686
version: 1.0.0
epoch: 0
release: 1.el7
summary: Twin-panel (commander-style) file manager (GTK)
url: http://doublecmd.sourceforge.net
rpm_license: GPLv2+ and LGPLv2+ and Expat and MPLv1.1 and MPLv2.0 and ASL 2.0 and BSD and Expat and zlib
rpm_vendor: RED SOFT
rpm_group: File tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: doublecmd-1.0.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: doublecmd-gtk-1.0.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Double Commander GTK is a cross platform open source file manager with two
  panels side by side.
  It is inspired by Total Commander and features some new ideas.


pkgId: 21aab2b00a53aadb868ed5d34988609e9393a114c6927fcbe9425745feb59e34
name: doublecmd-qt
arch: i686
version: 1.0.0
epoch: 0
release: 1.el7
summary: Twin-panel (commander-style) file manager (Qt5)
url: http://doublecmd.sourceforge.net
rpm_license: GPLv2+ and LGPLv2+ and Expat and MPLv1.1 and MPLv2.0 and ASL 2.0 and BSD and Expat and zlib
rpm_vendor: RED SOFT
rpm_group: File tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: doublecmd-1.0.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: doublecmd-qt-1.0.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Double Commander QT5 is a cross platform open source file manager with two
  panels side by side.
  It is inspired by Total Commander and features some new ideas.


pkgId: 63c3c205a1a643af00e9e6149a76a514a63c9128ac9e5bb0664ff1598d83be6e
name: doublecmd-qt
arch: i686
version: 1.1.19
epoch: 0
release: 1.el7
summary: Twin-panel (commander-style) file manager (Qt5).
url: http://doublecmd.sourceforge.net
rpm_vendor: RED SOFT
rpm_group: File tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: doublecmd-1.1.19-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: doublecmd-qt-1.1.19-1.el7.i686.rpm
checksum_type: sha256
description:
  Double Commander QT6 is a cross platform open source file manager with two
  panels side by side.
  It is inspired by Total Commander and features some new ideas.

rpm_license:
[cell repeats an earlier one in this file: 111 characters]


pkgId: 696f2c0ace77546e8be63a278d45b5b219bd20715118e24a5a3e638394cbb0f3
name: dovecot
arch: i686
version: 2.3.11.3
epoch: 1
release: 5.el7.3
summary: Secure imap and pop3 server
url: http://www.dovecot.org/
rpm_license: MIT and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dovecot-2.3.11.3-5.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: dovecot-2.3.11.3-5.el7.3.i686.rpm
checksum_type: sha256
description:
  Dovecot is an IMAP server for Linux/UNIX-like systems, written with security
  primarily in mind.  It also contains a small POP3 server.  It supports mail
  in either of maildir or mbox formats.

  The SQL drivers and authentication plug-ins are in their subpackages.


pkgId: 50dff6b9ba7b726d2d4271b4ef4ffd6bf85dc955dee8ca73f70f6fcb7dc22c06
name: dpdk
arch: i686
version: 20.11
epoch: 0
release: 1.el7
summary: Set of libraries and drivers for fast packet processing
url: http://dpdk.org
rpm_license: BSD and LGPLv2 and GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpdk-20.11-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpdk-20.11-1.el7.i686.rpm
checksum_type: sha256
description:
  The Data Plane Development Kit is a set of libraries and drivers for
  fast packet processing in the user space.


pkgId: 4e070d9937e97c3054dcb0ee095bbabb24d4cddd9839742b9ad86850e30e7172
name: dpdk-devel
arch: i686
version: 20.11
epoch: 0
release: 1.el7
summary: Data Plane Development Kit development files
url: http://dpdk.org
rpm_license: BSD and LGPLv2 and GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpdk-20.11-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpdk-devel-20.11-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the headers and other files needed for developing
  applications with the Data Plane Development Kit.


pkgId: 4f450acca462b83eefbc05712e92f920add78beef2c943ef17337a9247e16954
name: dpkg
arch: i686
version: 1.21.9
epoch: 0
release: 1.el7
summary: Package maintenance system for Debian Linux
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-1.21.9-1.el7.i686.rpm
checksum_type: sha256
description:
  This package provides the low-level infrastructure for handling the
  installation and removal of Debian software packages.

  This package contains the tools (including dpkg-source) required
  to unpack, build and upload Debian source packages.

  This package also contains the programs dpkg which used to handle the
  installation and removal of packages on a Debian system.

  This package also contains dselect, an interface for managing the
  installation and removal of packages on the system.

  dpkg and dselect will certainly be non-functional on a rpm-based system
  because packages dependencies will likely be unmet.


pkgId: 635a3ac1b8039fb16a08fb4d3d3f4b339a9a75519d4ab87d057f1fbb4db5ffea
name: dpkg-dev
arch: noarch
version: 1.21.9
epoch: 0
release: 1.el7
summary: Debian package development tools
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-dev-1.21.9-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides the development tools (including dpkg-source)
  required to unpack, build and upload Debian source packages.
   .
  Most Debian source packages will require additional tools to build;
  for example, most packages need make and the C compiler gcc.


pkgId: 725742b108803521b96775fb6912cf4e066e7dabda4914ffaa5cd8c0c5343d93
name: dpkg-dev
arch: noarch
version: 1.21.9
epoch: 0
release: 2.el7
summary: Debian package development tools
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-dev-1.21.9-2.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides the development tools (including dpkg-source)
  required to unpack, build and upload Debian source packages.

  Most Debian source packages will require additional tools to build;
  for example, most packages need make and the C compiler gcc.


pkgId: c00a20e5318ed6150d1b7c9d0f1a0437a0ba35803935c1cefc974b49b07e6ff3
name: dpkg-devel
arch: i686
version: 1.21.9
epoch: 0
release: 1.el7
summary: Debian package management static library
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-devel-1.21.9-1.el7.i686.rpm
checksum_type: sha256
description:
  This package provides the header files and static library necessary to
  develop software using dpkg, the same library used internally by dpkg.

  Note though, that the API is to be considered volatile, and might change
  at any time, use at your own risk.


pkgId: e8a0a94075760df21bf9e7d9eb7636b54158c752ae4493450c663ad4c76a731f
name: dpkg-perl
arch: noarch
version: 1.21.9
epoch: 0
release: 1.el7
summary: Dpkg perl modules
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-perl-1.21.9-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides the perl modules used by the scripts
  in dpkg-dev. They cover a wide range of functionality. Among them
  there are the following public modules:
  .
   - Dpkg: core variables
   - Dpkg::Arch: architecture handling functions
   - Dpkg::Build::Info: build information functions
   - Dpkg::BuildFlags: set, modify and query compilation build flags
   - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
   - Dpkg::BuildProfile: parse and manipulate build profiles
   - Dpkg::Changelog: parse changelogs
   - Dpkg::Changelog::Entry: represents a changelog entry
   - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
   - Dpkg::Checksums: generate and parse checksums
   - Dpkg::Compression: simple database of available compression methods
   - Dpkg::Compression::Process: wrapper around compression tools
   - Dpkg::Compression::FileHandle: transparently (de)compress files
   - Dpkg::Conf: parse dpkg configuration files
   - Dpkg::Control: parse and manipulate Debian control information
     (.dsc, .changes, Packages/Sources entries, etc.)
   - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
   - Dpkg::Control::Fields: manage (list of known) control fields
   - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
   - Dpkg::Control::Info: parse files like debian/control
   - Dpkg::Control::Tests: parse files like debian/tests/control
   - Dpkg::Deps: parse and manipulate dependencies
   - Dpkg::Exit: push, pop and run exit handlers
   - Dpkg::Gettext: wrapper around Locale::gettext
   - Dpkg::IPC: spawn sub-processes and feed/retrieve data
   - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
     example)
   - Dpkg::Interface::Storable: base object serializer
   - Dpkg::Path: common path handling functions
   - Dpkg::Source::Package: extract Debian source packages
   - Dpkg::Substvars: substitute variables in strings
   - Dpkg::Vendor: identify current distribution vendor
   - Dpkg::Version: parse and manipulate Debian package versions
  .
  All the packages listed in Suggests or Recommends are used by some of the
  modules.


pkgId: 242837d2a1d797c7b2ed8e337c02e1b65d912e71f6de86164390bc4c6e7540b2
name: dpkg-perl
arch: noarch
version: 1.21.9
epoch: 0
release: 2.el7
summary: Dpkg perl modules
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: dpkg-perl-1.21.9-2.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides the perl modules used by the scripts
  in dpkg-dev. They cover a wide range of functionality. Among them
  there are the following public modules:
  .
   - Dpkg: core variables
   - Dpkg::Arch: architecture handling functions
   - Dpkg::Build::Info: build information functions
   - Dpkg::BuildFlags: set, modify and query compilation build flags
   - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
   - Dpkg::BuildProfile: parse and manipulate build profiles
   - Dpkg::Changelog: parse changelogs
   - Dpkg::Changelog::Entry: represents a changelog entry
   - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
   - Dpkg::Checksums: generate and parse checksums
   - Dpkg::Compression: simple database of available compression methods
   - Dpkg::Compression::Process: wrapper around compression tools
   - Dpkg::Compression::FileHandle: transparently (de)compress files
   - Dpkg::Conf: parse dpkg configuration files
   - Dpkg::Control: parse and manipulate Debian control information (.dsc, .changes, Packages/Sources entries, etc.)
   - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
   - Dpkg::Control::Fields: manage (list of known) control fields
   - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
   - Dpkg::Control::Info: parse files like debian/control
   - Dpkg::Control::Tests: parse files like debian/tests/control
   - Dpkg::Deps: parse and manipulate dependencies
   - Dpkg::Exit: push, pop and run exit handlers
   - Dpkg::Gettext: wrapper around Locale::gettext
   - Dpkg::IPC: spawn sub-processes and feed/retrieve data
   - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for example)
   - Dpkg::Interface::Storable: base object serializer
   - Dpkg::Path: common path handling functions
   - Dpkg::Source::Package: extract Debian source packages
   - Dpkg::Substvars: substitute variables in strings
   - Dpkg::Vendor: identify current distribution vendor
   - Dpkg::Version: parse and manipulate Debian package versions
  .
  All the packages listed in Suggests or Recommends are used by some of the
  modules.


pkgId: da6603a9aff1fef74bee7ebe5e6dcf8154bcfdbb8c7e52b8c820aefa6c614a4a
name: dqlite
arch: i686
version: 1.18.2
epoch: 0
release: 1.el7
summary: Embeddable, replicated and fault tolerant SQL engine
url: https://github.com/canonical/dqlite
rpm_license: LGPL-3.0-only WITH LGPL-3.0-linking-exception
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dqlite-1.18.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dqlite-1.18.2-1.el7.i686.rpm
checksum_type: sha256
description:
  dqlite is a C library that implements an embeddable and replicated SQL database
  engine with high-availability and automatic failover.


pkgId: d8221e0f14ddde26697ecbc18f4cde50e1b297f1e89de78d158c2a4eac5d439f
name: dracut
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: Initramfs generator using udev
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-050-6.el7.i686.rpm
checksum_type: sha256
description:
  dracut contains tools to create bootable initramfses for the Linux
  kernel. Unlike other implementations, dracut hard-codes as little
  as possible into the initramfs. dracut contains various modules which
  are driven by the event-based udev. Having root on MD, DM, LVM2, LUKS
  is supported as well as NFS, iSCSI, NBD, FCoE with the dracut-network
  package.


pkgId: 82ec33302df8a0b38d426968dc8500854f4cf9ed5e75a4cda8fe9ebab1c765b2
name: dracut-caps
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: dracut modules to build a dracut initramfs which drops capabilities
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-caps-050-6.el7.i686.rpm
checksum_type: sha256
description:
  This package requires everything which is needed to build an
  initramfs with dracut, which drops capabilities.


pkgId: caef069dfe1b293f4b6f949074702e118fe831fe78ee71a9ace4f28038eb06d4
name: dracut-config-generic
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: dracut configuration to turn off hostonly image generation
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-config-generic-050-6.el7.i686.rpm
checksum_type: sha256
description:
  This package provides the configuration to turn off the host specific initramfs
  generation with dracut and generates a generic image by default.


pkgId: c4e40ed49a38bf6d1ee9185125732e397c1e36d84b31311cd6022635d5218c95
name: dracut-live
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: dracut modules to build a dracut initramfs with live image capabilities
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-live-050-6.el7.i686.rpm
checksum_type: sha256
description:
  This package requires everything which is needed to build an
  initramfs with dracut, with live image capabilities, like Live CDs.


pkgId: b9da94e0ae110850174233d2a52db9089f4805592f1dd6001df00e8946c260f6
name: dracut-network
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: dracut modules to build a dracut initramfs with network support
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-network-050-6.el7.i686.rpm
checksum_type: sha256
description:
  This package requires everything which is needed to build a generic
  all purpose initramfs with network support with dracut.


pkgId: 8ec6ca509b1626d8de7c2bbfa93de83c9e5455d7d0c434e4993d685e3ed195d6
name: dracut-squash
arch: i686
version: 050
epoch: 0
release: 6.el7
summary: dracut module to build an initramfs with most files in a squashfs image
url: https://dracut.wiki.kernel.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dracut-050-6.el7.src.rpm
rpm_packager: RED SOFT
location_href: dracut-squash-050-6.el7.i686.rpm
checksum_type: sha256
description:
  This package provides a dracut module to build an initramfs, but store most files
  in a squashfs image, result in a smaller initramfs size and reduce runtime memory
  usage.


pkgId: 37e0629bee5250df2452aa56819a8bbf043ebb985e85b4e46dfbe134f1fb5ac2
name: drawio-desktop
arch: x86_64
version: 24.7.17
epoch: 0
release: 1.el7
summary: Security-first diagramming for teams.
url: https://github.com/jgraph/drawio-desktop
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drawio-desktop-24.7.17-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drawio-desktop-24.7.17-1.el7.x86_64.rpm
checksum_type: sha256
description:
  drawio-desktop is a diagrams.net desktop app based on Electron. draw.io is the old name for diagrams.net,
  we just don't want the hassle of changing all the binary's names.


pkgId: 3879f9ae867c01ac568bce5e8fa9839508c134bcef348209e633996eb42bf03e
name: drbd
arch: x86_64
version: 9.22.0
epoch: 0
release: 1.el7
summary: DRBD tools
url: https://github.com/LINBIT
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-9.22.0-1.el7.x86_64.rpm
checksum_type: sha256
description:
  DRBD, developed by LINBIT, is a software that allows RAID 1 functionality
  over TCP/IP and RDMA for GNU/Linux. DRBD is a block device which is
  designed to build high availability clusters and software defined storage
  by providing a virtual shared device which keeps disks in nodes synchronised
  using TCP/IP or RDMA. This simulates RAID 1 but avoids the use of uncommon
  hardware (shared SCSI buses or Fibre Channel).


pkgId: 3db74037a4426de3c96dd27c43aa393c3c80d5dbcacf873757a98de46571beda
name: drbd-kmod
arch: x86_64
version: 9.0.27
epoch: 0
release: 7.gita0d939f.el7
summary: LINBIT DRBD kernel module
url: https://github.com/LINBIT
rpm_license: GPL2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-kmod-9.0.27-7.gita0d939f.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-kmod-9.0.27-7.gita0d939f.el7.x86_64.rpm
checksum_type: sha256
description:
  DRBD, developed by LINBIT, is a software that allows RAID 1 functionality
  over TCP/IP and RDMA for GNU/Linux. DRBD is a block device which is designed
  to build high availability clusters and software defined storage by providing
  a virtual shared device which keeps disks in nodes synchronised using
  TCP/IP or RDMA. This simulates RAID 1 but avoids the use of uncommon hardware
  (shared SCSI buses or Fibre Channel).

  This package contains the Linux kernel module for DRBD9.


pkgId: 4f52d4d57751915a8a6141292b30c33e80fff5140aecc983b8947bd0a5c41684
name: drbd-pacemaker
arch: i686
version: 9.22.0
epoch: 0
release: 1.el7
summary: Pacemaker resource agent for DRBD
url: https://github.com/LINBIT/drbd-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-utils-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-pacemaker-9.22.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the master/slave DRBD resource agent for the
  Pacemaker High Availability cluster manager.


pkgId: 8770c630d95c4583ccba0798792b4811ef142a134897d782695e88725086fced
name: drbd-selinux
arch: i686
version: 9.22.0
epoch: 0
release: 1.el7
summary: SElinux policy for DRBD
url: https://github.com/LINBIT/drbd-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-utils-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-selinux-9.22.0-1.el7.i686.rpm
checksum_type: sha256
description:
  drbd-selinux contains the SELinux policy meant to be used with this version of DRBD and related tools.


pkgId: 561ec07e489ee6f91f3311d7e8718860ce8acb8643f7166f9463ff4154b42bb6
name: drbd-udev
arch: i686
version: 9.22.0
epoch: 0
release: 1.el7
summary: udev integration scripts for DRBD
url: https://github.com/LINBIT/drbd-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-utils-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-udev-9.22.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains udev helper scripts for DRBD, managing symlinks to
  DRBD devices in /dev/drbd/by-res and /dev/drbd/by-disk.


pkgId: 87a0a6b55b416389d251be5b1f918b2dc9d40654e30b68e028c3a96dfcc31d41
name: drbd-utils
arch: i686
version: 9.22.0
epoch: 0
release: 1.el7
summary: DRBD user-land tools and scripts
url: https://github.com/LINBIT/drbd-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-utils-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-utils-9.22.0-1.el7.i686.rpm
checksum_type: sha256
description:
  DRBD, developed by LINBIT, is a software that allows RAID 1 functionality
  over TCP/IP and RDMA for GNU/Linux. DRBD is a block device which is
  designed to build high availability clusters and software defined storage
  by providing a virtual shared device which keeps disks in nodes synchronised
  using TCP/IP or RDMA. This simulates RAID 1 but avoids the use of uncommon
  hardware (shared SCSI buses or Fibre Channel).

  This package contains the user space utilities for DRBD.


pkgId: a8d655304fd10af43f84f6a69afcbc52472f63e978a3e6ee9be143ae21d488be
name: drbd-xen
arch: i686
version: 9.22.0
epoch: 0
release: 1.el7
summary: Xen block device management script for DRBD
url: https://github.com/LINBIT/drbd-utils
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drbd-utils-9.22.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drbd-xen-9.22.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains a Xen block device helper script for DRBD, capable of
  promoting and demoting DRBD resources as necessary.


pkgId: ec75c6badb74f58adf446761713d57e70d85caa027124f58e255135bbdef7c5d
name: drpm
arch: i686
version: 0.4.1
epoch: 0
release: 5.el7
summary: A library for making, reading and applying deltarpm packages
url: https://github.com/rpm-software-management/drpm
rpm_license: LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drpm-0.4.1-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: drpm-0.4.1-5.el7.i686.rpm
checksum_type: sha256
description:
  The drpm package provides a library for making, reading and applying deltarpms,
  compatible with the original deltarpm packages.


pkgId: ec4441bf7be7a3902078971d2fd59eeabb2fcdcb65aae658da5683c8690c8540
name: drupal7
arch: noarch
version: 7.103
epoch: 0
release: 1.el7
summary: An open-source content-management platform
url: https://www.drupal.org
rpm_license: GPL-2.0-or-later AND LicenseRef-Callaway-BSD AND LicenseRef-Callaway-MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: drupal7-7.103-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: drupal7-7.103-1.el7.noarch.rpm
checksum_type: sha256
description:
  Equipped with a powerful blend of features, Drupal is a Content Management
  System written in PHP that can support a variety of websites ranging from
  personal weblogs to large community-driven websites.  Drupal is highly
  configurable, skinnable, and secure.


pkgId: 458804c148fd795243d22f04eb59ae680f1396d64263907e720b9e3ec5cb9a50
name: dselect
arch: i686
version: 1.21.9
epoch: 0
release: 1.el7
summary: Debian package management front-end
url: https://tracker.debian.org/pkg/dpkg
rpm_license: GPLv2 and GPLv2+ and LGPLv2+ and Public Domain and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dpkg-1.21.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dselect-1.21.9-1.el7.i686.rpm
checksum_type: sha256
description:
  dselect is a high-level interface for managing the installation and
  removal of Debian software packages.
  Many users find dselect intimidating and new users may prefer to use apt-based
  user interfaces.


pkgId: 11a0467c16cb6e1daafb3035c48eea5f8b21b96a92ea2dc8f415ca9ae5f972b0
name: dstat
arch: noarch
version: 0.7.4
epoch: 0
release: 1.el7
summary: Versatile resource statistics tool
url: http://dag.wieers.com/home-made/dstat/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dstat-0.7.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dstat-0.7.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  Dstat is a versatile replacement for vmstat, iostat, netstat and ifstat.
  Dstat overcomes some of their limitations and adds some extra features,
  more counters and flexibility. Dstat is handy for monitoring systems
  during performance tuning tests, benchmarks or troubleshooting.

  Dstat allows you to view all of your system resources instantly, you
  can eg. compare disk usage in combination with interrupts from your
  IDE controller, or compare the network bandwidth numbers directly
  with the disk throughput (in the same interval).

  Dstat gives you detailed selective information in columns and clearly
  indicates in what magnitude and unit the output is displayed. Less
  confusion, less mistakes.


pkgId: d1dd25ad2bde8b0cff53e256c33c4512351a1f170187098d4d71b547e16cef8b
name: dtc
arch: i686
version: 1.6.1
epoch: 0
release: 1.el7
summary: Device Tree Compiler
url: https://devicetree.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dtc-1.6.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dtc-1.6.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Devicetree is a data structure for describing hardware. Rather than hard coding
  every detail of a device into an operating system, many aspects of the hardware
  can be described in a data structure that is passed to the operating system at
  boot time. The devicetree is used by OpenFirmware, OpenPOWER Abstraction Layer
  (OPAL), Power Architecture Platform Requirements (PAPR) and in the standalone
  Flattened Device Tree (FDT) form.


pkgId: 9eeac886e7944f9eefa08cd7a1d8cf585854a67085010d877dad7160920de2b8
name: duperemove
arch: i686
version: 0.15
epoch: 0
release: 1.el7
summary: Software to find duplicate extents in files and remove them
url: https://github.com/markfasheh/duperemove
rpm_license: GPL-2.0-only
rpm_vendor: RED SOFT
rpm_group: System/Filesystems
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: duperemove-0.15-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: duperemove-0.15-1.el7.i686.rpm
checksum_type: sha256
description:
  Duperemove finds duplicate extents in files and prints them to the
  console. It also has the option to deduplicate extents on those file
  systems which support the Linux extent-same ioctl.


pkgId: 19e102deb22d9cb329b25e5022800c91737661a579a9235f2f0e34e4f6b9e9ed
name: duplicity
arch: i686
version: 0.8.19
epoch: 0
release: 1.el7.3
summary: Encrypted bandwidth-efficient backup using rsync algorithm
url: http://www.nongnu.org/duplicity/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: duplicity-0.8.19-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: duplicity-0.8.19-1.el7.3.i686.rpm
checksum_type: sha256
description:
  Duplicity incrementally backs up files and directory by encrypting
  tar-format volumes with GnuPG and uploading them to a remote (or
  local) file server. In theory many protocols for connecting to a
  file server could be supported; so far ssh/scp, local file access,
  rsync, ftp, HSI, WebDAV and Amazon S3 have been written.

  Because duplicity uses librsync, the incremental archives are space
  efficient and only record the parts of files that have changed since
  the last backup. Currently duplicity supports deleted files, full
  unix permissions, directories, symbolic links, fifos, device files,
  but not hard links.


pkgId: 6c02abe8856e1bfcd8dbbdd2d3033938fa009783480d2a99b7ad3037ba86ed69
name: dvb-firmware
arch: noarch
version: 20240709
epoch: 0
release: 1.el7.3
summary: Firmware for various DVB broadcast receivers
url: http://www.kernel.org/
rpm_license: Redistributable, no modification permitted
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: linux-firmware-20240709-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: dvb-firmware-20240709-1.el7.3.noarch.rpm
checksum_type: sha256
description:
  Firmware for various DVB broadcast receivers. These include the
  Siano DTV devices, devices based on Conexant chipsets (cx18,
  cx23885, cx23840, cx231xx), Xceive xc4000/xc5000, DiBcom dib0700,
  Terratec H5 DRX-K, ITEtech IT9135 Ax and Bx, and av7110.


pkgId: ad1fb4c664ea77002c0ce8169406cd845c3ea6971a91e8132789d74aa54e37b5
name: dvdauthor
arch: i686
version: 0.7.2
epoch: 0
release: 3.el7
summary: Command line DVD authoring tool
url: http://dvdauthor.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dvdauthor-0.7.2-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: dvdauthor-0.7.2-3.el7.i686.rpm
checksum_type: sha256
description:
  DVDAuthor is a set of tools to help you author the file and directory
  structure of a DVD-Video disc, including programmatic commands for
  implementing interactive behavior. It is driven by command lines and
  XML control files, though there are other programs that provide
  GUI-based front ends if you prefer.


pkgId: c1dec1c4e4ebdf2622bc4ab9853b9e9de1a5b457a548afb96c56c73926494876
name: dwz
arch: i686
version: 0.15
epoch: 0
release: 1.el7
summary: DWARF optimization and duplicate removal tool
url: https://sourceware.org/dwz/
rpm_license: GPLv2+ and GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dwz-0.15-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: dwz-0.15-1.el7.i686.rpm
checksum_type: sha256
description:
  The dwz package contains a program that attempts to optimize DWARF
  debugging information contained in ELF shared libraries and ELF executables
  for size, by replacing DWARF information representation with equivalent
  smaller representation where possible and by reducing the amount of
  duplication using techniques from DWARF standard appendix E - creating
  DW_TAG_partial_unit compilation units (CUs) for duplicated information
  and using DW_TAG_imported_unit to import it into each CU that needs it.


pkgId: 99fc4aa5e5604a103f87babadc24eb789c0e027cce3bab29be3cffd9fdb73630
name: e2fsprogs
arch: i686
version: 1.44.6
epoch: 0
release: 4.el7.3
summary: Utilities for managing ext2, ext3, and ext4 file systems
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: e2fsprogs-1.44.6-4.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: e2fsprogs-1.44.6-4.el7.3.i686.rpm
checksum_type: sha256
description:
  The e2fsprogs package contains a number of utilities for creating,
  checking, modifying, and correcting any inconsistencies in second,
  third and fourth extended (ext2/ext3/ext4) file systems. E2fsprogs
  contains e2fsck (used to repair file system inconsistencies after an
  unclean shutdown), mke2fs (used to initialize a partition to contain
  an empty ext2 file system), debugfs (used to examine the internal
  structure of a file system, to manually repair a corrupted
  file system, or to create test cases for e2fsck), tune2fs (used to
  modify file system parameters), and most of the other core ext2fs
  file system utilities.

  You should install the e2fsprogs package if you need to manage the
  performance of an ext2, ext3, or ext4 file system.


pkgId: 01e9a3810584bdd8fc2de45b172bb386f3227606f1ac9ab7f27bb6403594d88c
name: e2fsprogs-devel
arch: i686
version: 1.44.6
epoch: 0
release: 4.el7.3
summary: Ext2/3/4 file system specific libraries and headers
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: e2fsprogs-1.44.6-4.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: e2fsprogs-devel-1.44.6-4.el7.3.i686.rpm
checksum_type: sha256
description:
  E2fsprogs-devel contains the libraries and header files needed to
  develop second, third and fourth extended (ext2/ext3/ext4)
  file system specific programs.

  You should install e2fsprogs-devel if you want to develop ext2/3/4
  file system specific programs. If you install e2fsprogs-devel, you'll
  also want to install e2fsprogs.


pkgId: 2b4c3160f1f8c2d5f0f5adb2ac164bc9c37c356b2e6eacff7faa4f9f1a641458
name: e2fsprogs-libs
arch: i686
version: 1.44.6
epoch: 0
release: 4.el7.3
summary: Ext2/3/4 file system specific shared libraries
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: e2fsprogs-1.44.6-4.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: e2fsprogs-libs-1.44.6-4.el7.3.i686.rpm
checksum_type: sha256
description:
  E2fsprogs-libs contains libe2p and libext2fs, the libraries of the
  e2fsprogs package.

  These libraries are used to directly access ext2/3/4 file systems
  from user space.


pkgId: 3a8d24c070680e3727db7919f8b0ac77cf0dc16b3ab7e548524f8a5fec00a0d4
name: e2fsprogs-static
arch: i686
version: 1.44.6
epoch: 0
release: 4.el7.3
summary: Ext2/3/4 file system specific static libraries
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: e2fsprogs-1.44.6-4.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: e2fsprogs-static-1.44.6-4.el7.3.i686.rpm
checksum_type: sha256
description:
  E2fsprogs-static contains all static libraries built from e2fsprogs,
  including libext2fs, libcom_err, libe2p, and libss.

  These libraries are used to directly access ext2/3/4 file systems
  from user space, and perform other useful functions.


pkgId: 78b49eb5fd633904ba97a957feb2b80e79cf5abfe7db25841e7d5c3ec2ba28a1
name: e2scrub
arch: i686
version: 1.46.3
epoch: 0
release: 1.el7.3
summary: Online Ext4 metadata consistency checking tool and service
url: http://e2fsprogs.sourceforge.net/
rpm_license: GPLv2 and LGPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: e2fsprogs-1.46.3-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: e2scrub-1.46.3-1.el7.3.i686.rpm
checksum_type: sha256
description:
  This package includes e2scrub script that can check ext[234] file system
  metadata consistency while the file system is online. It also containes a
  systemd service that can be enabled to do consistency check periodically.

  The file system consistency check can be performed online and does not
  require the file system to be unmounted. It uses lvm snapshots to do this
  which means that it can only be done on file systems that are on a lvm
  managed device with some free space available in respective volume group.


pkgId: 24d7e1d90577f0abc3c1b33f3b96f0e3d48d12675f2096ff69eee333d5ad26b1
name: ecj
arch: noarch
version: 4.19
epoch: 1
release: 1.el7
summary: Eclipse Compiler for Java
url: https://www.eclipse.org
rpm_license: EPL-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ecj-4.19-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: ecj-4.19-1.el7.noarch.rpm
checksum_type: sha256
description:
  ECJ is the Java bytecode compiler of the Eclipse Platform.  It is also known as
  the JDT Core batch compiler.


pkgId: aef9c89e30ce0beed54dbb9f373a784b195b4071a6ff7161aa5958e3fc39cd47
name: edk2-aarch64
arch: noarch
version: 20190829git37eef91017ad
epoch: 0
release: 10.el7
summary: UEFI firmware for aarch64 virtual machines
url: https://github.com/tianocore/tianocore.github.io/wiki/ArmVirtPkg
rpm_license: BSD-2-Clause-Patent and OpenSSL
rpm_vendor: RED SOFT
rpm_group: Applications/Emulators
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: edk2-20190829git37eef91017ad-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: edk2-aarch64-20190829git37eef91017ad-10.el7.noarch.rpm
checksum_type: sha256
description:
  AAVMF (ARM Architecture Virtual Machine Firmware) is an EFI Development Kit II
  platform that enables UEFI support for QEMU/KVM ARM Virtual Machines. This
  package contains a 64-bit build.


pkgId: 0bf807b4a6d93275a2ef9ccae0bc4d865d424f037a7f2329ded1cd1d89e93b9d
name: edk2-ovmf
arch: noarch
version: 20190829git37eef91017ad
epoch: 0
release: 10.el7
summary: UEFI firmware for x86_64 virtual machines
url: http://www.tianocore.org/ovmf/
rpm_license: BSD-2-Clause-Patent and OpenSSL
rpm_vendor: RED SOFT
rpm_group: Applications/Emulators
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: edk2-20190829git37eef91017ad-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: edk2-ovmf-20190829git37eef91017ad-10.el7.noarch.rpm
checksum_type: sha256
description:
  OVMF (Open Virtual Machine Firmware) is a project to enable UEFI support for
  Virtual Machines. This package contains a sample 64-bit UEFI firmware for QEMU
  and KVM.


pkgId: 7162a0b7236e340b670773957e6dc55d2ff14e7bd88b3b13a7c0fded2fefdc99
name: edk2-tools-doc
arch: noarch
version: 20190829git37eef91017ad
epoch: 0
release: 10.el7
summary: Documentation for EFI Development Kit II Tools
url: https://github.com/tianocore/tianocore.github.io/wiki/BaseTools
rpm_license: BSD-2-Clause-Patent
rpm_vendor: RED SOFT
rpm_group: Development/Tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: edk2-20190829git37eef91017ad-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: edk2-tools-doc-20190829git37eef91017ad-10.el7.noarch.rpm
checksum_type: sha256
description:
  This package documents the tools that are needed to
  build EFI executables and ROMs using the GNU tools.


pkgId: 4731f8dcc9cc0be7c87c9d8a0e5ba4e6c6458bf11983192a1ff3a656c3b0ff9d
name: edk2-tools-python
arch: noarch
version: 20230524
epoch: 0
release: 2.el7
summary: EFI Development Kit II Tools
url: http://www.tianocore.org
rpm_license: BSD-2-Clause-Patent and OpenSSL and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: edk2-20230524-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: edk2-tools-python-20230524-2.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides tools that are needed to build EFI executables
  and ROMs using the GNU tools.  You do not need to install this package;
  you probably want to install edk2-tools only.


pkgId: 734beaa8cb365dc117b0518a1172f3b1decfc575149848caabb3f9f1a337dab9
name: eepm
arch: noarch
version: 3.62.0
epoch: 0
release: 1.el7
summary: Etersoft EPM package manager
url: http://wiki.etersoft.ru/EPM
rpm_license: AGPL-3.0+
rpm_vendor: RED SOFT
rpm_group: System/Configuration/Packaging
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: eepm-3.62.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: eepm-3.62.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Etersoft EPM is the package manager for any platform
  and any platform version. It provides
  universal interface to any package manager.
  Can be useful for system administrators working
  with various distros.

  See detailed description here: http://wiki.etersoft.ru/EPM


pkgId: 326a889fdc8d15e41366759f636e9b94dfb130d0bc4a41b1c8b667e88d59a13e
name: eepm-repack
arch: noarch
version: 3.64.11
epoch: 0
release: 1.el7
summary: Etersoft EPM package manager (repack requirements)
url: http://wiki.etersoft.ru/EPM
rpm_license: AGPL-3.0+
rpm_vendor: RED SOFT
rpm_group: System/Configuration/Packaging
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: eepm-3.64.11-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: eepm-repack-3.64.11-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package has requirements needed for using epm repack on ALT
  (repack rpm packages and repack/install deb packages).

  See https://bugzilla.altlinux.org/show_bug.cgi?id=34308 for
  a discussion about extra requirements.


pkgId: 91a4439ebf5a2f7a8c9c55cf638a055e48baf99c6790b40e4c028f7023b78931
name: efi-filesystem
arch: noarch
version: 5
epoch: 0
release: 6.el7.3
summary: The basic directory layout for EFI machines
url: https://github.com/rhboot/efi-rpm-macros/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: efi-rpm-macros-5-6.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: efi-filesystem-5-6.el7.3.noarch.rpm
checksum_type: sha256
description:
  The efi-filesystem package contains the basic directory layout for EFI
  machine bootloaders and tools.


pkgId: e7f4885c660e5fe9c3f1ff0b12d5ba19c5ec40e139401861270b51a5563f6176
name: ejabberd
arch: noarch
version: 19.09.1
epoch: 0
release: 1.el7
summary: A distributed, fault-tolerant Jabber/XMPP server
url: https://www.ejabberd.im/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ejabberd-19.09.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: ejabberd-19.09.1-1.el7.noarch.rpm
checksum_type: sha256
description:
  ejabberd is a Free and Open Source distributed fault-tolerant
  Jabber/XMPP server. It is mostly written in Erlang, and runs on many
  platforms (tested on Linux, FreeBSD, NetBSD, Solaris, Mac OS X and
  Windows NT/2000/XP).


pkgId: 1c36d85fd1158796ae61f3e327f7aa16a76925899c21437a6da76256ffb35c82
name: ekiga
arch: i686
version: 4.0.1
epoch: 0
release: 46.el7
summary: A Gnome based SIP/H323 teleconferencing application
url: http://www.ekiga.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Applications/Communications
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ekiga-4.0.1-46.el7.src.rpm
rpm_packager: RED SOFT
location_href: ekiga-4.0.1-46.el7.i686.rpm
checksum_type: sha256
description:
  Ekiga is a tool to communicate with video and audio over the internet.
  It uses the standard SIP and H323 protocols.


pkgId: 3ff528f944ae164313bde5cad2e08cb36d67c4197cebbf6f085f90f35d9fcecd
name: elfutils
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: A collection of utilities and DSOs to handle ELF files and DWARF data
url: http://elfutils.org/
rpm_license: GPLv3+ and (GPLv2+ or LGPLv3+) and GFDL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  Elfutils is a collection of utilities, including stack (to show
  backtraces), nm (for listing symbols from object files), size
  (for listing the section sizes of an object or archive file),
  strip (for discarding symbols), readelf (to see the raw ELF file
  structures), elflint (to check for well-formed ELF files) and
  elfcompress (to compress or decompress ELF sections).


pkgId: 904ad9dc81df7b8addebe3d41a311ee4d224c25b0543afe46d97b513e7039a86
name: elfutils-debuginfod
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: HTTP ELF/DWARF file server addressed by build-id
url: http://elfutils.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-debuginfod-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-debuginfod package contains the debuginfod binary
  and control files for a service that can provide ELF/DWARF
  files to remote clients, based on build-id identification.
  The ELF/DWARF file searching functions in libdwfl can query
  such servers to download those files on demand.


pkgId: eb2bd2bdf5dcb7cfb26f7d1f52edd7c9909507acee332c32d11932c1984f894e
name: elfutils-debuginfod-client
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Library and command line client for build-id HTTP ELF/DWARF server
url: http://elfutils.org/
rpm_license: GPLv3+ and (GPLv2+ or LGPLv3+)
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-debuginfod-client-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-debuginfod-client package contains shared libraries
  dynamically loaded from -ldw, which use a debuginfod service
  to look up debuginfo and associated data. Also includes a
  command-line frontend.


pkgId: d8e291ccb60d4aa20163b99ca34a56d5fd2108bcd907df2f8659c243c1005a84
name: elfutils-debuginfod-client-devel
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Libraries and headers to build debuginfod client applications
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-debuginfod-client-devel-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-debuginfod-client-devel package contains the libraries
  to create applications to use the debuginfod service.


pkgId: 3a4bb30d5a74ddec69a4da27f955ca2eaaea9e8aad87c4a9dedfb63d280ba5be
name: elfutils-default-yama-scope
arch: noarch
version: 0.185
epoch: 0
release: 2.el7
summary: Default yama attach scope sysctl setting
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-default-yama-scope-0.185-2.el7.noarch.rpm
checksum_type: sha256
description:
  Yama sysctl setting to enable default attach scope settings
  enabling programs to use ptrace attach, access to
  /proc/PID/{mem,personality,stack,syscall}, and the syscalls
  process_vm_readv and process_vm_writev which are used for
  interprocess services, communication and introspection
  (like synchronisation, signaling, debugging, tracing and
  profiling) of processes.


pkgId: 8ff5f0eb268e7e9af31f2e770b9896b046860f6fb439a5dab77a0ac01fd12e0d
name: elfutils-devel
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Development libraries to handle compiled objects
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-devel-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-devel package contains the libraries to create
  applications for handling compiled objects.  libdw provides access
  to the DWARF debugging information.  libasm provides a programmable
  assembler interface.


pkgId: 132d8fc1754427a83e9c543e1e76990d8850ceee8c802e7971509b545b874e5a
name: elfutils-libelf
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Library to read and write ELF files
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-libelf-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-libelf package provides a DSO which allows reading and
  writing ELF files on a high level.  Third party programs depend on
  this package to read internals of ELF files.  The programs of the
  elfutils package use it also to generate new ELF files.


pkgId: 111a4dc75942ff3f3f5680875e0af86db86f737466adae3e36361791e4b008a4
name: elfutils-libelf-devel
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Development support for libelf
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-libelf-devel-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-libelf-devel package contains the libraries to create
  applications for handling compiled objects.  libelf allows you to
  access the internals of the ELF object file format, so you can see the
  different sections of an ELF file.


pkgId: f7add31d14dab06edee4e115d32a0d35b98dd9bd80064bacc8140c8cc2fc4580
name: elfutils-libs
arch: i686
version: 0.185
epoch: 0
release: 2.el7
summary: Libraries to handle compiled objects
url: http://elfutils.org/
rpm_license: GPLv2+ or LGPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elfutils-0.185-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: elfutils-libs-0.185-2.el7.i686.rpm
checksum_type: sha256
description:
  The elfutils-libs package contains libraries which implement DWARF, ELF,
  and machine-specific ELF handling and process introspection.  These
  libraries are used by the programs in the elfutils package.  The
  elfutils-devel package enables building other programs using these
  libraries.


pkgId: 19d384065b1c52d04c1d46b6d646a84bba9a5ca86f40e679e28e4a785f2be394
name: elixir
arch: i686
version: 1.14.3
epoch: 0
release: 1.el7
summary: A modern approach to programming for the Erlang VM
url: https://elixir-lang.org/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: elixir-1.14.3-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: elixir-1.14.3-1.el7.i686.rpm
checksum_type: sha256
description:
  Elixir is a programming language built on top of the Erlang VM.
  As Erlang, it is a functional language built to support distributed,
  fault-tolerant, non-stop applications with hot code swapping.


pkgId: 4c005eaebd4ce11492048f311eb3492cc08bd49994d7ce8a0ca96c95e005053b
name: emacs
arch: i686
version: 25.0.92
epoch: 1
release: 4.el7
summary: GNU Emacs text editor
url: http://www.gnu.org/software/emacs/
rpm_license: GPLv3+ and CC0-1.0
rpm_vendor: RED SOFT
rpm_group: Applications/Editors
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: emacs-25.0.92-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: emacs-25.0.92-4.el7.i686.rpm
checksum_type: sha256
description:
  Emacs is a powerful, customizable, self-documenting, modeless text
  editor. Emacs contains special code editing features, a scripting
  language (elisp), and the capability to read mail, news, and more
  without leaving the editor.

  This package provides an emacs binary with support for X windows.


pkgId: 499bd45dd3787ca88ef3b8737ebf63f81c3f5c65194f08d017c6ca22a97b44d5
name: emacs-common
arch: i686
version: 25.0.92
epoch: 1
release: 4.el7
summary: Emacs common files
url: http://www.gnu.org/software/emacs/
rpm_license: GPLv3+ and GFDL and BSD
rpm_vendor: RED SOFT
rpm_group: Applications/Editors
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: emacs-25.0.92-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: emacs-common-25.0.92-4.el7.i686.rpm
checksum_type: sha256
description:
  Emacs is a powerful, customizable, self-documenting, modeless text
  editor. Emacs contains special code editing features, a scripting
  language (elisp), and the capability to read mail, news, and more
  without leaving the editor.

  This package contains all the common files needed by emacs or emacs-nox.


pkgId: 31db61fa709fd01f22c7a6fe20a5dd0c7cb9b62df033cb56a63867622eb07e70
name: emacs-filesystem
arch: noarch
version: 25.0.92
epoch: 1
release: 4.el7
summary: Emacs filesystem layout
url: http://www.gnu.org/software/emacs/
rpm_license: GPLv3+ and CC0-1.0
rpm_vendor: RED SOFT
rpm_group: Applications/Editors
rpm_buildhost: appolo.red-soft.ru
rpm_sourcerpm: emacs-25.0.92-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: emacs-filesystem-25.0.92-4.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides some directories which are required by other
  packages that add functionality to Emacs.


pkgId: af8f245aba9b8c60eea7d14d9aad36eadb54df39b13522f51c33c8c218f1f4a1
name: emacs-nox
arch: i686
version: 25.0.92
epoch: 1
release: 4.el7
summary: GNU Emacs text editor without X support
url: http://www.gnu.org/software/emacs/
rpm_license: GPLv3+ and CC0-1.0
rpm_vendor: RED SOFT
rpm_group: Applications/Editors
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: emacs-25.0.92-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: emacs-nox-25.0.92-4.el7.i686.rpm
checksum_type: sha256
description:
  Emacs is a powerful, customizable, self-documenting, modeless text
  editor. Emacs contains special code editing features, a scripting
  language (elisp), and the capability to read mail, news, and more
  without leaving the editor.

  This package provides an emacs binary with no X windows support for running
  on a terminal.


pkgId: b3ff412b28d3a67de4513c1157d6f0b2fe0bc95e1e4c2216fa8333de5570e868
name: emacs-terminal
arch: noarch
version: 25.0.92
epoch: 1
release: 4.el7
summary: A desktop menu item for GNU Emacs terminal.
url: http://www.gnu.org/software/emacs/
rpm_license: GPLv3+ and CC0-1.0
rpm_vendor: RED SOFT
rpm_group: Applications/Editors
rpm_buildhost: appolo.red-soft.ru
rpm_sourcerpm: emacs-25.0.92-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: emacs-terminal-25.0.92-4.el7.noarch.rpm
checksum_type: sha256
description:
  Contains a desktop menu item running GNU Emacs terminal. Install
  emacs-terminal if you need a terminal with Malayalam support.

  Please note that emacs-terminal is a temporary package and it will be
  removed when another terminal becomes capable of handling Malayalam.


pkgId: a129878f1d807e7b4b484e07e6db24bf28902c8f1d5ff063ef06a09cada90092
name: empathy
arch: i686
version: 3.12.14
epoch: 1
release: 8.el7
summary: Instant Messaging Client for GNOME
url: https://wiki.gnome.org/Apps/Empathy
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: empathy-3.12.14-8.el7.src.rpm
rpm_packager: RED SOFT
location_href: empathy-3.12.14-8.el7.i686.rpm
checksum_type: sha256
description:
  Empathy is a powerful multi-protocol instant messaging client which
  supports Jabber, GTalk, MSN, IRC, Salut, and other protocols.
  It is built on top of the Telepathy framework.


pkgId: a7d0b7854aadf8af86cc08d068de102fde991acc944b87cb38d3e2ec48f64ad9
name: enet
arch: i686
version: 1.3.16
epoch: 0
release: 1.el7
summary: Thin, simple and robust network layer on top of UDP
url: http://enet.bespin.org
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: enet-1.3.16-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: enet-1.3.16-1.el7.i686.rpm
checksum_type: sha256
description:
  ENet is a relatively thin, simple and robust network communication layer on
  top of UDP (User Datagram Protocol). The primary feature it provides is
  optional reliable, in-order delivery of packets.

  ENet is NOT intended to be a general purpose high level networking library
  that handles authentication, lobbying, server discovery, compression,
  encryption and other high level, often application level or dependent tasks.


pkgId: bbe244710b3516a60d5fdfe61a59de4266001baa4fc15409f72c75905d29626c
name: enet-devel
arch: i686
version: 1.3.16
epoch: 0
release: 1.el7
summary: Development files for enet
url: http://enet.bespin.org
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: enet-1.3.16-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: enet-devel-1.3.16-1.el7.i686.rpm
checksum_type: sha256
description:
  The enet-devel package contains libraries and header files for
  developing applications that use enet.


pkgId: 63d235a6954e08fe1e404c2767c762dc850e07ce67a7af9bdaa0c954667b9fd8
name: engrampa
arch: i686
version: 1.26.0
epoch: 1
release: 10.el7
summary: MATE Desktop file archiver
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: engrampa-1.26.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: engrampa-1.26.0-10.el7.i686.rpm
checksum_type: sha256
description:
  Mate File Archiver is an application for creating and viewing archives files,
  such as zip, xv, bzip2, cab, rar and other compress formats.


pkgId: 30a9a7a55d6a1ffcca54e0166cd641f390e835cc487cf83c5aad49d34cb06e57
name: engrampa
arch: i686
version: 1.26.0
epoch: 1
release: 13.el7
summary: MATE Desktop file archiver
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: engrampa-1.26.0-13.el7.src.rpm
rpm_packager: RED SOFT
location_href: engrampa-1.26.0-13.el7.i686.rpm
checksum_type: sha256
description:
  Mate File Archiver is an application for creating and viewing archives files,
  such as zip, xv, bzip2, 7z, cab, rar and other compress formats.


pkgId: f9edbb04a72ab0b5337a4a8131410328faa2635c2accd6729e85ab55dc9541db
name: eom
arch: i686
version: 1.26.0
epoch: 1
release: 10.el7
summary: Eye of MATE image viewer
url: http://mate-desktop.org
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: eom-1.26.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: eom-1.26.0-10.el7.i686.rpm
checksum_type: sha256
description:
  The Eye of MATE (eom) is the official image viewer for the
  MATE desktop. It can view single image files in a variety of formats, as
  well as large image collections.
  Eye of Mate is extensible through a plugin system.


pkgId: 6ed8af70d3f3d210f37997f4c459417297198a40a4dc075eee8e401da8b8e63f
name: erlang
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: General-purpose programming language and runtime environment
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  Erlang is a general-purpose programming language and runtime
  environment. Erlang has built-in support for concurrency, distribution
  and fault tolerance. Erlang is used in several large telecommunication
  systems from Ericsson.


pkgId: 1e547a7ab5a3cda3b47c28a66200b36686f8943552c3a7f801bac65a02ec0e68
name: erlang-cache_tab
arch: i686
version: 1.0.20
epoch: 0
release: 4.el7
summary: Erlang cache table application
url: https://github.com/processone/cache_tab/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-cache_tab-1.0.20-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-cache_tab-1.0.20-4.el7.i686.rpm
checksum_type: sha256
description:
  This application is intended to proxy back-end operations for Key-Value insert,
  lookup and delete and maintain a cache of those Key-Values in-memory, to save
  back-end operations. Operations are intended to be atomic between back-end and
  cache tables. The lifetime of the cache object and the max size of the cache
  can be defined as table parameters to limit the size of the in-memory tables.


pkgId: 205fbf264c8a8a1a5acf62dde640be7ba9ba04c5753f895308ef7afb4d566e2e
name: erlang-fast_xml
arch: i686
version: 1.1.37
epoch: 0
release: 4.el7
summary: Fast Expat based Erlang XML parsing and manipulation library
url: https://github.com/processone/fast_xml/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-fast_xml-1.1.37-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-fast_xml-1.1.37-4.el7.i686.rpm
checksum_type: sha256
description:
  Fast Expat based Erlang XML parsing and manipulation library, with a strong
  focus on XML stream parsing from network. It supports full XML structure
  parsing, suitable for small but complete XML chunks, and XML stream parsing
  suitable for large XML document, or infinite network XML stream like XMPP.
  This module can parse files much faster than built-in module xmerl. Depending
  on file complexity and size xml_stream:parse_element/1 can be 8-18 times faster
  than calling xmerl_scan:string/2.


pkgId: 2b003dc13585344aa22b84aa940373b5ee455cebaaead62ebc19259ecf8cfcf6
name: erlang-megaco
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: Megaco/H.248 support library
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-megaco-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  Megaco/H.248 is a protocol for control of elements in a physically
  decomposed multimedia gateway, enabling separation of call control
  from media conversion.


pkgId: 4a490dc2f396a3817cb62378e24b2b027132a5e84412886e18958d4f7508851f
name: erlang-mqtree
arch: i686
version: 1.0.5
epoch: 0
release: 4.el7
summary: Index tree for MQTT topic filters
url: https://github.com/processone/mqtree/
rpm_license: ASL 2.0 and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-mqtree-1.0.5-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-mqtree-1.0.5-4.el7.i686.rpm
checksum_type: sha256
description:
  mqtree is an Erlang NIF implementation of N-ary tree
  to keep MQTT topic filters for efficient matching.


pkgId: 2e86f91027ed9d9c58a06cdf21961c7bddbe1451d80b5873693813b3028008c1
name: erlang-reltool
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: A release management tool
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-reltool-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  Reltool is a release management tool. It analyses a given
  Erlang/OTP installation and determines various dependencies
  between applications. The graphical frontend depicts the
  dependencies and enables interactive customization of a
  target system. The backend provides a batch interface
  for generation of customized target systems.


pkgId: 5f2d81d5819f588b6ea47ee1e7273e44ab884a1383cde10bfa8a50ef4833f48e
name: erlang-sasl
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: The System Architecture Support Libraries
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-sasl-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  The System Architecture Support Libraries is a set of tools for
  release upgrades and alarm handling etc.


pkgId: e1c09284c634194491d4d34bb121642824d5484441b8a42d57403b2584913aa1
name: erlang-snmp
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: Simple Network Management Protocol (SNMP) support
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-snmp-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  Simple Network Management Protocol (SNMP) support including a
  MIB compiler and tools for creating SNMP agents.


pkgId: d12495013dd323505416007b942b8a45d4c6321e37f51b6e9f18c97bf46b84ef
name: erlang-src
arch: i686
version: 25.2.3
epoch: 0
release: 1.el7
summary: Erlang sources
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-25.2.3-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-src-25.2.3-1.el7.i686.rpm
checksum_type: sha256
description:
  Erlang sources. It may be useful as a reference for code completion tools in
  various editors, for documentation or automatical-code generation purposes.


pkgId: 92931bb97d039b1a64ffe6653a880e8b737dc60b106ae3ccc5fbdb62a0fb7f70
name: erlang-stringprep
arch: i686
version: 1.0.17
epoch: 0
release: 4.el7
summary: A framework for preparing Unicode strings to help input and comparison
url: https://github.com/processone/stringprep/
rpm_license: ASL 2.0 and TCL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-stringprep-1.0.17-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-stringprep-1.0.17-4.el7.i686.rpm
checksum_type: sha256
description:
  Stringprep is a framework for preparing Unicode test strings in order to
  increase the likelihood that string input and string comparison work. The
  principle are defined in RFC-3454: Preparation of Internationalized Strings.
  This library is leverage Erlang native NIF mechanism to provide extremely fast
  and efficient processing.


pkgId: e507dc2e811f7167f27dd0d53faa6258b2a8d60c4859c73e880b1a3fe4465200
name: erlang-syntax_tools
arch: i686
version: 22.3.4.12
epoch: 0
release: 1.el7
summary: A set of tools for dealing with erlang sources
url: https://www.erlang.org
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: erlang-22.3.4.12-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: erlang-syntax_tools-22.3.4.12-1.el7.i686.rpm
checksum_type: sha256
description:
  A utility used to handle abstract Erlang syntax trees,
  reading source files differently, pretty-printing syntax trees.


pkgId: c9cc391c16ed4b20b4322aeda81d028806791badb746c92c4899f63eb476e89f
name: espeak-ng
arch: i686
version: 1.51.1
epoch: 0
release: 1.el7
summary: eSpeak NG Text-to-Speech
url: https://github.com/espeak-ng/espeak-ng
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: espeak-ng-1.51.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: espeak-ng-1.51.1-1.el7.i686.rpm
checksum_type: sha256
description:
  The eSpeak NG (Next Generation) Text-to-Speech program is an open source speech
  synthesizer that supports over 70 languages. It is based on the eSpeak engine
  created by Jonathan Duddington. It uses spectral formant synthesis by default
  which sounds robotic, but can be configured to use Klatt formant synthesis
  or MBROLA to give it a more natural sound.

rpm_license:
  GPL-3.0-only AND GPL-3.0-or-later AND Apache-2.0 AND BSD-2-Clause AND Unicode-DFS-2016 AND CC-BY-SA-3.0


pkgId: 824bcd592534818ab019ac82bc4b6e612533474c1fd105f16d2a0d7f4e9fc0f0
name: etckeeper
arch: noarch
version: 1.18.16
epoch: 0
release: 1.el7
summary: Store /etc in a SCM system (git, mercurial, bzr or darcs)
url: https://etckeeper.branchable.com/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: etckeeper-1.18.16-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: etckeeper-1.18.16-1.el7.noarch.rpm
checksum_type: sha256
description:
  The etckeeper program is a tool to let /etc be stored in a git,
  mercurial, bzr or darcs repository. It hooks into yum to automatically
  commit changes made to /etc during package upgrades. It tracks file
  metadata that version control systems do not normally support, but that
  is important for /etc, such as the permissions of /etc/shadow. It's
  quite modular and configurable, while also being simple to use if you
  understand the basics of working with version control.

  The default backend is git, if want to use a another backend please
  install the appropriate tool (mercurial, darcs or bzr).


  To start using the package please read /usr/share/doc/etckeeper/README.


pkgId: 1967fe6db4b606477eeb9ad17e48c5675c23c838381cc6f2d5af1f2a16d5f621
name: etckeeper
arch: noarch
version: 1.18.23
epoch: 0
release: 1.el7
summary: Store /etc in a SCM system (git, mercurial, bzr or darcs)
url: https://etckeeper.branchable.com/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: etckeeper-1.18.23-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: etckeeper-1.18.23-1.el7.noarch.rpm
checksum_type: sha256
description:
  The etckeeper program is a tool to let /etc be stored in a git,
  mercurial, bzr or darcs repository. It hooks into yum to automatically
  commit changes made to /etc during package upgrades. It tracks file
  metadata that version control systems do not normally support, but that
  is important for /etc, such as the permissions of /etc/shadow. It's
  quite modular and configurable, while also being simple to use if you
  understand the basics of working with version control.

  The default backend is git, if want to use a another backend please
  install the appropriate tool (mercurial, darcs or bzr).
   To use bazaar/breezy as backend, please also install the etckeeper-brz package.

  To start using the package please read /usr/share/doc/etckeeper/README.


pkgId: 101f0a3b9182a997bf2c40a276e717311edb32909e9cf4d1870012e6a60dc7e3
name: etckeeper-dnf
arch: noarch
version: 1.18.16
epoch: 0
release: 1.el7
summary: DNF plugin for etckeeper support
url: https://etckeeper.branchable.com/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: etckeeper-1.18.16-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: etckeeper-dnf-1.18.16-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides a DNF plugin for etckeeper. If you want to use
  etckeeper with DNF, install this package.


pkgId: 4692fc21fcfcbe8578c4d745f698d099a6cb9ced1930d6df75f6d87e3b90fe58
name: evince
arch: i686
version: 3.34.2
epoch: 0
release: 3.el7
summary: Document viewer
url: https://wiki.gnome.org/Apps/Evince
rpm_license: GPLv2+ and GPLv3+ and LGPLv2+ and MIT and Afmparse
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evince-3.34.2-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: evince-3.34.2-3.el7.i686.rpm
checksum_type: sha256
description:
  Evince is simple multi-page document viewer. It can display and print
  Portable Document Format (PDF), PostScript (PS) and Encapsulated PostScript
  (EPS) files. When supported by the document format, evince allows searching
  for text, copying text to the clipboard, hypertext navigation,
  table-of-contents bookmarks and editing of forms.

   Support for other document formats such as DVI and DJVU can be added by
  installing additional backends.


pkgId: d843e6eada09a617341ba2a7468a8b02b5ef03982f41845396b744fa53e5e937
name: evince-nautilus
arch: i686
version: 3.34.2
epoch: 0
release: 3.el7
summary: Evince extension for nautilus
url: https://wiki.gnome.org/Apps/Evince
rpm_license: GPLv2+ and GPLv3+ and LGPLv2+ and MIT and Afmparse
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evince-3.34.2-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: evince-nautilus-3.34.2-3.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the evince extension for the nautilus file manager.
  It adds an additional tab called "Document" to the file properties dialog.


pkgId: 41f489fde4f05b08854e4d20f2aabca3e5f121a049a316e4e55968e1c7a74431
name: evolution
arch: i686
version: 3.44.4
epoch: 0
release: 1.el7
summary: Mail and calendar client for GNOME
url: https://wiki.gnome.org/Apps/Evolution
rpm_license: GPLv2+ and GFDL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evolution-3.44.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: evolution-3.44.4-1.el7.i686.rpm
checksum_type: sha256
description:
  Evolution is the GNOME mailer, calendar, contact manager and
  communications tool.  The components which make up Evolution
  are tightly integrated with one another and act as a seamless
  personal information-management tool.


pkgId: 438a19358b5cb031840a2de87672156f90741a321e7991ba992058a2bed75271
name: evolution-data-server
arch: i686
version: 3.44.4
epoch: 0
release: 1.el7
summary: Backend data server for Evolution
url: https://wiki.gnome.org/Apps/Evolution
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evolution-data-server-3.44.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: evolution-data-server-3.44.4-1.el7.i686.rpm
checksum_type: sha256
description:
  The evolution-data-server package provides a unified backend for programs that work
  with contacts, tasks, and calendar information.

  It was originally developed for Evolution (hence the name), but is now used
  by other packages.


pkgId: 443c0705e2a3d4700338e73031565b6358f61de45b53638bdc117183ecb48106
name: evolution-data-server-tests
arch: i686
version: 3.44.4
epoch: 0
release: 1.el7
summary: Tests for the evolution-data-server package
url: https://wiki.gnome.org/Apps/Evolution
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evolution-data-server-3.44.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: evolution-data-server-tests-3.44.4-1.el7.i686.rpm
checksum_type: sha256
description:
  The evolution-data-server-tests package contains tests that can be used to verify
  the functionality of the installed evolution-data-server package.


pkgId: 9ce90c50e35eaec930b0f3e8e58bec3fa94c7258c6be5274f35720412059b3a1
name: evolution-ews
arch: i686
version: 3.44.4
epoch: 0
release: 1.el7
summary: Evolution extension for Exchange Web Services
url: https://wiki.gnome.org/Apps/Evolution
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evolution-ews-3.44.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: evolution-ews-3.44.4-1.el7.i686.rpm
checksum_type: sha256
description:
  This package allows Evolution to interact with Microsoft Exchange servers,
  versions 2007 and later, through its Exchange Web Services (EWS) interface.


pkgId: e6ac4a0245c1fd685f4485bdb90b4e7a5983b79ca2a59ca1912c9b481dc606f2
name: evolution-pst
arch: i686
version: 3.44.4
epoch: 0
release: 1.el7
summary: PST importer plugin for Evolution
url: https://wiki.gnome.org/Apps/Evolution
rpm_license: GPLv2+ and GFDL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: evolution-3.44.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: evolution-pst-3.44.4-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the plugin to import Microsoft Personal Storage Table
  (PST) files used by Microsoft Outlook and Microsoft Exchange.


pkgId: 3a0c259a20e0385df6b382ee2822b3a9ef288f38737bc602217f2a84957d0a6c
name: exempi
arch: i686
version: 2.2.0
epoch: 0
release: 21.el7
summary: Library for easy parsing of XMP metadata
url: http://libopenraw.freedesktop.org/wiki/Exempi
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exempi-2.2.0-21.el7.src.rpm
rpm_packager: RED SOFT
location_href: exempi-2.2.0-21.el7.i686.rpm
checksum_type: sha256
description:
  Exempi provides a library for easy parsing of XMP metadata. It is a port of
  Adobe XMP SDK to work on UNIX and to be build with GNU automake.
  It includes XMPCore and XMPFiles.


pkgId: 0a67dbf4398efb2a81a5948a38a5cc6db2076806674b5dbd6212579c0cb06ee4
name: exim
arch: i686
version: 4.94.2
epoch: 0
release: 1.el7.3
summary: The exim mail transfer agent
url: https://www.exim.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exim-4.94.2-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: exim-4.94.2-1.el7.3.i686.rpm
checksum_type: sha256
description:
  Exim is a message transfer agent (MTA) developed at the University of
  Cambridge for use on Unix systems connected to the Internet. It is
  freely available under the terms of the GNU General Public Licence. In
  style it is similar to Smail 3, but its facilities are more
  general. There is a great deal of flexibility in the way mail can be
  routed, and there are extensive facilities for checking incoming
  mail. Exim can be installed in place of sendmail, although the
  configuration of exim is quite different to that of sendmail.


pkgId: b78327315645bf8e6f3b0c787d33698147e0d95dc40397e6253c1e4c1a64ca7a
name: exim-greylist
arch: i686
version: 4.94.2
epoch: 0
release: 1.el7.3
summary: Example configuration for greylisting using Exim
url: https://www.exim.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exim-4.94.2-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: exim-greylist-4.94.2-1.el7.3.i686.rpm
checksum_type: sha256
description:
  This package contains a simple example of how to do greylisting in Exim's
  ACL configuration. It contains a cron job to remove old entries from the
  greylisting database, and an ACL subroutine which needs to be included
  from the main exim.conf file.

  To enable greylisting, install this package and then uncomment the lines
  in Exim's configuration /etc/exim.conf which enable it. You need to
  uncomment at least two lines -- the '.include' directive which includes
  the new ACL subroutine, and the line which invokes the new subroutine.

  By default, this implementation only greylists mails which appears
  'suspicious' in some way. During normal processing of the ACLs we collect
  a list of 'offended' which it's committed, which may include having
  SpamAssassin points, lacking a Message-ID: header, coming from a blacklisted
  host, etc. There are examples of these in the default configuration file,
  mostly commented out. These should be sufficient for you to you trigger
  greylisting for whatever 'offences' you can dream of, or even to make
  greylisting unconditional.


pkgId: 7403e4c894d764f7240d72d9330ef6efca5d9a8dd949a0c2ab29a53c94cc94d7
name: exim-mon
arch: i686
version: 4.94.2
epoch: 0
release: 1.el7.3
summary: X11 monitor application for Exim
url: https://www.exim.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exim-4.94.2-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: exim-mon-4.94.2-1.el7.3.i686.rpm
checksum_type: sha256
description:
  The Exim Monitor is an optional supplement to the Exim package. It
  displays information about Exim's processing in an X window, and an
  administrator can perform a number of control actions from the window
  interface.


pkgId: a71bb2c30beee11d27630846f4e9a3a0f8f02b344b87e522e8ddcdfa6f7ba10d
name: exiv2
arch: i686
version: 0.27.3
epoch: 0
release: 3.el7
summary: Exif and Iptc metadata manipulation library
url: http://www.exiv2.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exiv2-0.27.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: exiv2-0.27.3-3.el7.i686.rpm
checksum_type: sha256
description:
  A command line utility to access image metadata, allowing one to:
  * print the Exif metadata of Jpeg images as summary info, interpreted values,
    or the plain data for each tag
  * print the Iptc metadata of Jpeg images
  * print the Jpeg comment of Jpeg images
  * set, add and delete Exif and Iptc metadata of Jpeg images
  * adjust the Exif timestamp (that's how it all started...)
  * rename Exif image files according to the Exif timestamp
  * extract, insert and delete Exif metadata (including thumbnails),
    Iptc metadata and Jpeg comments


pkgId: 3b9aa61dc2afb76b41c0dc5f02e0ae2e10971a2f3652acc43eaf39689532a17a
name: exiv2-libs
arch: i686
version: 0.27.3
epoch: 0
release: 3.el7
summary: Exif and Iptc metadata manipulation library
url: http://www.exiv2.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: exiv2-0.27.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: exiv2-libs-0.27.3-3.el7.i686.rpm
checksum_type: sha256
description:
  A C++ library to access image metadata, supporting full read and write access
  to the Exif and Iptc metadata, Exif MakerNote support, extract and delete
  methods for Exif thumbnails, classes to access Ifd and so on.


pkgId: 92171e9044394cafd0e411e885df9e497c457497a2bb090e53f89b8f64110e33
name: expat
arch: i686
version: 2.4.1
epoch: 0
release: 1.el7
summary: An XML parser library
url: https://libexpat.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: expat-2.4.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: expat-2.4.1-1.el7.i686.rpm
checksum_type: sha256
description:
  This is expat, the C library for parsing XML, written by James Clark. Expat
  is a stream oriented XML parser. This means that you register handlers with
  the parser prior to starting the parse. These handlers are called when the
  parser discovers the associated structures in the document being parsed. A
  start tag is an example of the kind of structures for which you may
  register handlers.


pkgId: 0a5d3ca5b83f897006a81c6e1bcaf6fbcf4e95b57b77030620e3397da169812e
name: expat-devel
arch: i686
version: 2.4.1
epoch: 0
release: 1.el7
summary: Libraries and header files to develop applications using expat
url: https://libexpat.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: expat-2.4.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: expat-devel-2.4.1-1.el7.i686.rpm
checksum_type: sha256
description:
  The expat-devel package contains the libraries, include files and documentation
  to develop XML applications with expat.


pkgId: ff3eebf267a663220bacb022017a49421635d09943d59e36c8e20f607b5b4f40
name: expat-static
arch: i686
version: 2.4.1
epoch: 0
release: 1.el7
summary: expat XML parser static library
url: https://libexpat.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: expat-2.4.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: expat-static-2.4.1-1.el7.i686.rpm
checksum_type: sha256
description:
  The expat-static package contains the static version of the expat library.
  Install it if you need to link statically with expat.


pkgId: c6ebe79660c6d7536a1db27aeadc7f2958ef6e0eb510d6e489501eac1342b352
name: f2fs-tools
arch: i686
version: 1.14.0
epoch: 0
release: 1.el7.3
summary: Tools for Flash-Friendly File System (F2FS)
url: http://sourceforge.net/projects/f2fs-tools/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: f2fs-tools-1.14.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: f2fs-tools-1.14.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  NAND flash memory-based storage devices, such as SSD, and SD cards,
  have been widely being used for ranging from mobile to server systems.
  Since they are known to have different characteristics from the
  conventional rotational disks,a file system, an upper layer to
  the storage device, should adapt to the changes
  from the sketch.

  F2FS is a new file system carefully designed for the
  NAND flash memory-based storage devices.
  We chose a log structure file system approach,
  but we tried to adapt it to the new form of storage.
  Also we remedy some known issues of the very old log
  structured file system, such as snowball effect
  of wandering tree and high cleaning overhead.

  Because a NAND-based storage device shows different characteristics
  according to its internal geometry or flash memory management
  scheme aka FTL, we add various parameters not only for configuring
  on-disk layout, but also for selecting allocation
  and cleaning algorithms.


pkgId: 55df291e0498bfca22f1b64e6ea03963f2d289f8cad33d46950dca7c19b0452d
name: f3
arch: i686
version: 8.0
epoch: 0
release: 1.el7
summary: Utility to test for fake flash drives and cards
url: http://oss.digirati.com.br/f3/
rpm_license: GPLv3
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: f3-8.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: f3-8.0-1.el7.i686.rpm
checksum_type: sha256
description:
  F3 is a utility to test for fake flash drives and cards. It is a Free
  Software alternative to h2testw.  f3write will fill the unused part of
  a filesystem with files NNNN.fff with known content, and f3read will
  analyze the files to determine whether the contents are corrupted, as
  happens with fake flash.


pkgId: 9f01bb642b510c807c4c5fca10667892f60f941e2356019eaab2861faf5f24ed
name: faad2
arch: i686
version: 2.7
epoch: 0
release: 20.el7
summary: C library and frontend for decoding MPEG2/4 AAC
url: http://www.audiocoding.com/
rpm_license: GPL-2.0+
rpm_vendor: RED SOFT
rpm_group: Application/Multimedia
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: faad2-2.7-20.el7.src.rpm
rpm_packager: RED SOFT
location_href: faad2-2.7-20.el7.i686.rpm
checksum_type: sha256
description:
  FAAD 2 is a LC, MAIN and LTP profile, MPEG2 and MPEG-4 AAC decoder, completely
  written from scratch. FAAD 2 is licensed under the GPL.


pkgId: 3be94d404a1537e44a3154ed7d8430d4437739a0cb87652566acab82e854eb77
name: faad2-devel
arch: i686
version: 2.7
epoch: 0
release: 20.el7
summary: Development files of the FAAD 2 AAC decoder
url: http://www.audiocoding.com/
rpm_license: GPL-2.0+
rpm_vendor: RED SOFT
rpm_group: Development/Libraries/C and C++
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: faad2-2.7-20.el7.src.rpm
rpm_packager: RED SOFT
location_href: faad2-devel-2.7-20.el7.i686.rpm
checksum_type: sha256
description:
  FAAD 2 is a LC, MAIN and LTP profile, MPEG2 and MPEG-4 AAC decoder, completely
  written from scratch. FAAD 2 is licensed under the GPL.
  Header files and development documentation for libfaad.


pkgId: c4156c5379b31bf144d72379ccc05fe188db785a437a0ee069d0920d43e5ad59
name: facter
arch: noarch
version: 4.2.0
epoch: 0
release: 4.el7
summary: Command and ruby library for gathering system information
url: https://puppetlabs.com/facter
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: facter-4.2.0-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: facter-4.2.0-4.el7.noarch.rpm
checksum_type: sha256
description:
  Facter is a lightweight program that gathers basic node information about the
  hardware and operating system. Facter is especially useful for retrieving
  things like operating system names, hardware characteristics, IP addresses, MAC
  addresses, and SSH keys.

  Facter is extensible and allows gathering of node information that may be
  custom or site specific. It is easy to extend by including your own custom
  facts. Facter can also be used to create conditional expressions in Puppet that
  key off the values returned by facts.


pkgId: 14107135cf159f13e8bfe402edd80e04f034536e31495609b85533326b696402
name: fail2ban
arch: noarch
version: 0.11.1
epoch: 0
release: 3.el7
summary: Daemon to ban hosts that cause multiple authentication errors
url: http://fail2ban.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fail2ban-0.11.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fail2ban-0.11.1-3.el7.noarch.rpm
checksum_type: sha256
description:
  Fail2Ban scans log files and bans IP addresses that makes too many password
  failures. It updates firewall rules to reject the IP address. These rules can
  be defined by the user. Fail2Ban can read multiple log files such as sshd or
  Apache web server ones.

  Fail2Ban is able to reduce the rate of incorrect authentications attempts
  however it cannot eliminate the risk that weak authentication presents.
  Configure services to use only two factor or public/private authentication
  mechanisms if you really want to protect services.

  This is a meta-package that will install the default configuration.  Other
  sub-packages are available to install support for other actions and
  configurations.


pkgId: d15fb575c7cbc0567d4d8ee76a464a9a68fa8dd05df5409aa531eefeaa070e64
name: fail2ban-firewalld
arch: noarch
version: 0.11.1
epoch: 0
release: 3.el7
summary: Firewalld support for Fail2Ban
url: http://fail2ban.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fail2ban-0.11.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fail2ban-firewalld-0.11.1-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package enables support for manipulating firewalld rules.  This is the
  default firewall service in Fedora.


pkgId: 40d9a92f1f4aa6e295b7d6c1a45334f0da7bffabe2483abe5207952f7d8e9772
name: fail2ban-mail
arch: noarch
version: 0.11.1
epoch: 0
release: 3.el7
summary: Mail actions for Fail2Ban
url: http://fail2ban.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fail2ban-0.11.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fail2ban-mail-0.11.1-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package installs Fail2Ban's mail actions.  These are an alternative
  to the default sendmail actions.


pkgId: 7525a5534a8a01ad5d780a056116cbfa229b704a70cd41e1b0db33a5f50a9634
name: fail2ban-server
arch: noarch
version: 0.11.1
epoch: 0
release: 3.el7
summary: Core server component for Fail2Ban
url: http://fail2ban.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fail2ban-0.11.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fail2ban-server-0.11.1-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the core server components for Fail2Ban with minimal
  dependencies.  You can install this directly if you want to have a small
  installation and know what you are doing.


pkgId: a88e6dfce8be79be4f97a6f0f94f25c5a34982d0a61d02c4250f678deb0ddf96
name: fasm
arch: i686
version: 1.73.32
epoch: 0
release: 1.el7
summary: Flat assembler
url: https://flatassembler.net/
rpm_license: distributable
rpm_vendor: RED SOFT
rpm_group: Development/Tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fasm-1.73.32-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fasm-1.73.32-1.el7.i686.rpm
checksum_type: sha256
description:
  The flat assembler is a fast and efficient self-assembling 80x86
  assembler for DOS, Windows and Linux operating systems. Currently it
  supports all 8086-80486/Pentium instructions with MMX, SSE, SSE2, SSE3
  and 3DNow! extensions, can produce output in binary, MZ, PE, COFF or
  ELF format. It includes the powerful but easy to use macroinstruction
  support and does multiple passes to optimize the instruction codes for size.


pkgId: f2952b1a2b459057cf0b34ca2d21f39d355635cfc511f52bb8271b7361147d29
name: fasterxml-oss-parent
arch: noarch
version: 41
epoch: 0
release: 1.el7
summary: FasterXML parent pom
url: https://github.com/FasterXML/oss-parent
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fasterxml-oss-parent-41-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fasterxml-oss-parent-41-1.el7.noarch.rpm
checksum_type: sha256
description:
  FasterXML is the business behind the Woodstox streaming XML parser,
  Jackson streaming JSON parser, the Aalto non-blocking XML parser, and
  a growing family of utility libraries and extensions.

  FasterXML offers consulting services for adoption, performance tuning,
  and extension.

  This package contains the parent pom file for FasterXML.com projects.


pkgId: b1db3b8b313e1edda2d3417db9a57ac70c70751258f98958f53a9a1104cc3389
name: fastfetch
arch: i686
version: 2.38.0
epoch: 0
release: 1.el7
summary: Like neofetch, but much faster because written in c
url: https://github.com/fastfetch-cli/fastfetch
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fastfetch-2.38.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fastfetch-2.38.0-1.el7.i686.rpm
checksum_type: sha256
description:
  fastfetch is a neofetch-like tool for fetching system information and
  displaying them in a pretty way. It is written in c to achieve much better
  performance, in return only Linux and Android are supported. It also uses
  mechanisms like multithreading and caching to finish as fast as possible.


pkgId: b49ad1612c6eb16eb7066a19cef2d598edb25aeb53d7e4c8fad96a01b996a737
name: fastlz
arch: i686
version: 0.1.0
epoch: 0
release: 0.12.el7
summary: Portable real-time compression library
url: http://fastlz.org/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fastlz-0.1.0-0.12.el7.src.rpm
rpm_packager: RED SOFT
location_href: fastlz-0.1.0-0.12.el7.i686.rpm
checksum_type: sha256
description:
  FastLZ is a lossless data compression library designed for real-time
  compression and decompression. It favors speed over compression ratio.
  Decompression requires no memory. Decompression algorithm is very simple,
  and thus extremely fast.


pkgId: a61d1335c52bbd461b64d434fa07ef3537607eac7a02d584b4534f30f50a0d74
name: fasttext
arch: i686
version: 0.9.2
epoch: 0
release: 1.el7
summary: Efficient learning of word representations and sentence classification
url: https://fasttext.cc
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Development/Libraries/Python
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fasttext-0.9.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fasttext-0.9.2-1.el7.i686.rpm
checksum_type: sha256
description:
  The fastText is a library for efficient learning of
  word representations and sentence classification.


pkgId: 5f14bec948e1eb40618b4ad424f0ccd1d94439d9cc791781900864a2782ccde1
name: fatrace
arch: i686
version: 0.15
epoch: 0
release: 2.el7
summary: Reports file access events from all running processes
url: https://launchpad.net/fatrace
rpm_license: GPLv3
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fatrace-0.15-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fatrace-0.15-2.el7.i686.rpm
checksum_type: sha256
description:
  fatrace reports file access events from all running processes.

  Its main purpose is to find processes which keep waking up the disk
  unnecessarily and thus prevent some power saving.


pkgId: c391154b756c0955e4db17522c6dc685a857be7245e67e2649c0f7bcde6fbe11
name: fcgi
arch: i686
version: 2.4.6
epoch: 0
release: 1.el7
summary: FastCGI development kit
url: https://fastcgi-archives.github.io/
rpm_license: OML
rpm_vendor: RED SOFT
rpm_group: Development/Languages
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fcgi-2.4.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fcgi-2.4.6-1.el7.i686.rpm
checksum_type: sha256
description:
  FastCGI is a language independent, scalable, open extension to CGI that
  provides high performance without the limitations of server specific APIs.


pkgId: ae375589ddaaab4dd5b56cd129c67450a9918c4a07cda9e6a12f36090bbef83a
name: fcgi-devel
arch: i686
version: 2.4.6
epoch: 0
release: 1.el7
summary: Development files for fcgi
url: https://fastcgi-archives.github.io/
rpm_license: OML
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fcgi-2.4.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fcgi-devel-2.4.6-1.el7.i686.rpm
checksum_type: sha256
description:
  The fcgi-devel package contains libraries and header files for
  developing applications that use fcgi.


pkgId: daf0a4d29f69c255f22c86fd44e09158e00416387f1cc1135547e0f72137d206
name: fcoe-utils
arch: i686
version: 1.0.33
epoch: 0
release: 4.gitfe376de.el7
summary: Fibre Channel over Ethernet utilities
url: http://www.open-fcoe.org
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fcoe-utils-1.0.33-4.gitfe376de.el7.src.rpm
rpm_packager: RED SOFT
location_href: fcoe-utils-1.0.33-4.gitfe376de.el7.i686.rpm
checksum_type: sha256
description:
  Fibre Channel over Ethernet utilities
  fcoeadm - command line tool for configuring FCoE interfaces
  fcoemon - service to configure DCB Ethernet QOS filters, works with lldpad


pkgId: 498e22132bc24b811ca2f6bca9eccde4d55df8cb082be15b6f3a925c604acc5f
name: fence-agents-all
arch: i686
version: 4.10.0
epoch: 0
release: 1.el7
summary: Set of unified programs capable of host isolation ("fencing")
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPLv2+, LGPLv2+ and ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.10.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-agents-all-4.10.0-1.el7.i686.rpm
checksum_type: sha256
description:
  A collection of executables to handle isolation ("fencing") of possibly
  misbehaving hosts by the means of remote power management, blocking
  network, storage, or similar.

  This package serves as a catch-all for all supported fence agents.


pkgId: c790dadd227818e88b9907353c1e1acc6b6167e62775558d4fc2457366bce627
name: fence-agents-common
arch: noarch
version: 4.10.0
epoch: 0
release: 1.el7
summary: Common base for Fence Agents
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.10.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-agents-common-4.10.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  A collection of executables to handle isolation ("fencing") of possibly
  misbehaving hosts by the means of remote power management, blocking
  network, storage, or similar.

  This package contains support files including the Python fencing library.


pkgId: 56a237a5c5733925f191c22dba49a5b29ab262bda6fd5d6540e3d7489fa2b308
name: fence-agents-eaton-ssh
arch: noarch
version: 4.16.0
epoch: 0
release: 1.el7
summary: Fence agent for Eaton network power switches
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: System Environment/Base
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.16.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-agents-eaton-ssh-4.16.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Fence agent for Eaton network power switches that are accessed
  via the serial protocol tunnel over SSH.


pkgId: 272d88b7c9392613d22554a604f61ca2e5892b8416f77d5f06c0baf8b80ee23b
name: fence-virtd
arch: i686
version: 4.10.0
epoch: 0
release: 1.el7
summary: Daemon which handles requests from fence-virt
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.10.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-virtd-4.10.0-1.el7.i686.rpm
checksum_type: sha256
description:
  This package provides the host server framework, fence_virtd,
  for fence_virt.  The fence_virtd host daemon is resposible for
  processing fencing requests from virtual machines and routing
  the requests to the appropriate physical machine for action.


pkgId: 754140b758f6f7965c1c7fa115c15106b59e595e5cd319d060dbfb0d4483f094
name: fence-virtd-cpg
arch: i686
version: 4.10.0
epoch: 0
release: 1.el7
summary: CPG/libvirt backend for fence-virtd
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.10.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-virtd-cpg-4.10.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Provides fence_virtd with a connection to libvirt to fence
  virtual machines. Uses corosync CPG to keep track of VM
  locations to allow for non-local VMs to be fenced when VMs
  are located on corosync cluster nodes.


pkgId: 92b5472457713c75a77653a37404cea3d8996826ed8c0178017c26b5f4257521
name: fence-virtd-libvirt
arch: i686
version: 4.10.0
epoch: 0
release: 1.el7
summary: Libvirt backend for fence-virtd
url: https://github.com/ClusterLabs/fence-agents
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fence-agents-4.10.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fence-virtd-libvirt-4.10.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Provides fence_virtd with a connection to libvirt to fence
  virtual machines.  Useful for running a cluster of virtual
  machines on a desktop.


pkgId: 085d34d84567e3c347c1e2234577942d7e5ebe98cc7219bb5f41ed621f7b4681
name: fetchmail
arch: i686
version: 6.3.24
epoch: 0
release: 8.el7.3
summary: A remote mail retrieval and forwarding utility
url: http://fetchmail.berlios.de/
rpm_license: GPL+ and Public Domain
rpm_vendor: RED SOFT
rpm_group: Applications/Internet
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fetchmail-6.3.24-8.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: fetchmail-6.3.24-8.el7.3.i686.rpm
checksum_type: sha256
description:
  Fetchmail is a remote mail retrieval and forwarding utility intended
  for use over on-demand TCP/IP links, like SLIP or PPP connections.
  Fetchmail supports every remote-mail protocol currently in use on the
  Internet (POP2, POP3, RPOP, APOP, KPOP, all IMAPs, ESMTP ETRN, IPv6,
  and IPSEC) for retrieval. Then Fetchmail forwards the mail through
  SMTP so you can read it through your favorite mail client.

  Install fetchmail if you need to retrieve mail over SLIP or PPP
  connections.


pkgId: 7c9402fa379d4be3e454ef73d26825fbdb184d0d0f881a6f6db3820f09711f02
name: ffmpeg
arch: i686
version: 4.0
epoch: 0
release: 4.el7
summary: Digital VCR and streaming server
url: http://ffmpeg.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ffmpeg-4.0-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: ffmpeg-4.0-4.el7.i686.rpm
checksum_type: sha256
description:
  FFmpeg is a complete and free Internet live audio and video
  broadcasting solution for Linux/Unix. It also includes a digital
  VCR. It can encode in real time in many formats including MPEG1 audio
  and video, MPEG4, h263, ac3, asf, avi, real, mjpeg, and flash.


pkgId: e1bb24b7f8510b046d91123bcd3525a2bf1c570927e0deb5247fb4cb69d03f56
name: ffmpeg-devel
arch: i686
version: 4.0
epoch: 0
release: 4.el7
summary: Development package for ffmpeg
url: http://ffmpeg.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ffmpeg-4.0-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: ffmpeg-devel-4.0-4.el7.i686.rpm
checksum_type: sha256
description:
  FFmpeg is a complete and free Internet live audio and video
  broadcasting solution for Linux/Unix. It also includes a digital
  VCR. It can encode in real time in many formats including MPEG1 audio
  and video, MPEG4, h263, ac3, asf, avi, real, mjpeg, and flash.
  This package contains development files for ffmpeg


pkgId: 7624aa485c4cc60a7c37d410916ae7b8887ce9eb6b577276d7becf33a6af7b0f
name: ffmpeg-libs
arch: i686
version: 4.0
epoch: 0
release: 4.el7
summary: Libraries for ffmpeg
url: http://ffmpeg.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: ffmpeg-4.0-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: ffmpeg-libs-4.0-4.el7.i686.rpm
checksum_type: sha256
description:
  FFmpeg is a complete and free Internet live audio and video
  broadcasting solution for Linux/Unix. It also includes a digital
  VCR. It can encode in real time in many formats including MPEG1 audio
  and video, MPEG4, h263, ac3, asf, avi, real, mjpeg, and flash.
  This package contains the libraries for ffmpeg


pkgId: 841dc561df37d296b376b6e7381c2ffa0caa0e6b61d2d19264992c8dcff8d533
name: filebeat
arch: x86_64
version: 7.10.2
epoch: 0
release: 2.el7
summary: OSS beats for opendistroelasticsearch
url: https://www.elastic.co/beats/
rpm_license: Apache 2.0
rpm_vendor: RED SOFT
rpm_group: Applications/Internet
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: beats-7.10.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: filebeat-7.10.2-2.el7.x86_64.rpm
checksum_type: sha256
description:
  Whether you’re collecting from security devices, cloud, containers, hosts, or OT, Filebeat helps you keep the simple things
  simple by offering a lightweight way to forward and centralize logs and files.


pkgId: ba3bb6f3540d21595c2eef980fa64c8748051ec3fc323f597b0bafdd3b41a2b7
name: filebeat
arch: i686
version: 9.2.4
epoch: 0
release: 1.el7
summary: OSS beats for opendistroelasticsearch
url: https://www.elastic.co/beats/
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: beats-9.2.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: filebeat-9.2.4-1.el7.i686.rpm
checksum_type: sha256
description:
  Whether you’re collecting from security devices, cloud, containers, hosts, or OT, Filebeat helps you keep
  the simple things simple by offering a lightweight way to forward and centralize logs and files.


pkgId: 997779d2314e8715cc628ce9fa4a27dfb35ed9f13279ae40e275d88b4de8293c
name: finch
arch: i686
version: 2.14.14
epoch: 0
release: 4.el7
summary: A text-based user interface for libpurple
url: http://pidgin.im/
rpm_license: GPL-2.0-or-later and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: pidgin-2.14.14-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: finch-2.14.14-4.el7.i686.rpm
checksum_type: sha256
description:
  Finch is a text-based frontend for libpurple. It can run in a
  standard console or terminal within X11, using ncurses for rendering.


pkgId: f68ebee0fb0f8ac9fb49d41bfb4904f89aa101e3831599fee2d7b48ec566942c
name: finch
arch: i686
version: 2.14.8
epoch: 0
release: 1.el7
summary: A text-based user interface for Pidgin
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: pidgin-2.14.8-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: finch-2.14.8-1.el7.i686.rpm
checksum_type: sha256
description:
  A text-based user interface for using libpurple.  This can be run from a
  standard text console or from a terminal within X Windows.  It
  uses ncurses and our homegrown gnt library for drawing windows
  and text.


pkgId: fd6d6ab43352048e526598e588c44a4e8459b18f8c048f6936b7a4005ce924f6
name: finch-devel
arch: i686
version: 2.14.14
epoch: 0
release: 4.el7
summary: Development files for Finch plugins and extensions
url: http://pidgin.im/
rpm_license: GPL-2.0-or-later and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: pidgin-2.14.14-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: finch-devel-2.14.14-4.el7.i686.rpm
checksum_type: sha256
description:
  The finch-devel package contains header files, libraries, and
  documentation needed for developing Finch plugins or extensions.


pkgId: 82ad441b19e65572e509dce6981fc54fb3526c426778d645730437771d6b43f0
name: finch-devel
arch: i686
version: 2.14.8
epoch: 0
release: 1.el7
summary: Headers etc. for finch stuffs
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: pidgin-2.14.8-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: finch-devel-2.14.8-1.el7.i686.rpm
checksum_type: sha256
description:
  The finch-devel package contains the header files, developer
  documentation, and libraries required for development of Finch scripts
  and plugins.


pkgId: d8df68cc87eddbec401a75b23d06d3db84f52eedb41233598c979140694058f3
name: fio
arch: i686
version: 3.21
epoch: 0
release: 4.el7
summary: Multithreaded IO generation tool
url: http://git.kernel.dk/?p=fio.git;a=summary
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fio-3.21-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: fio-3.21-4.el7.i686.rpm
checksum_type: sha256
description:
  fio is an I/O tool that will spawn a number of threads or processes doing
  a particular type of io action as specified by the user.  fio takes a
  number of global parameters, each inherited by the thread unless
  otherwise parameters given to them overriding that setting is given.
  The typical use of fio is to write a job file matching the io load
  one wants to simulate.


pkgId: 1f9a7b16bd69b673b35672d949912cf6c118c58283f10de9e84cc5c4e6229625
name: firebird
arch: i686
version: 3.0.13.33818
epoch: 0
release: 1.el7
summary: SQL relational database management system
url: http://www.firebirdsql.org/
rpm_license: Interbase
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firebird-3.0.13.33818-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firebird-3.0.13.33818-1.el7.i686.rpm
checksum_type: sha256
description:
  Firebird is a relational database offering many ANSI SQL standard
  features that runs on Linux, Windows, and a variety of Unix platforms.
  Firebird offers excellent concurrency, high performance, and powerful
  language support for stored procedures and triggers. It has been used
  in production systems, under a variety of names, since 1981.


pkgId: 01431c7fa8a1c999227797b45a506aa4ddade7a682567a1cdba533b4816ec6c3
name: firebird-devel
arch: i686
version: 3.0.13.33818
epoch: 0
release: 1.el7
summary: UDF support library for Firebird SQL server
url: http://www.firebirdsql.org/
rpm_license: Interbase
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firebird-3.0.13.33818-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firebird-devel-3.0.13.33818-1.el7.i686.rpm
checksum_type: sha256
description:
  This package is needed for development of client applications and user
  defined functions (UDF) for Firebird SQL server.

  Firebird is a relational database offering many ANSI SQL standard
  features that runs on Linux, Windows, and a variety of Unix platforms.
  Firebird offers excellent concurrency, high performance, and powerful
  language support for stored procedures and triggers. It has been used
  in production systems, under a variety of names, since 1981.


pkgId: 0f43264f19c93793016ced5beb1ebb6401d52d6be851cfcb578109a58b2adb48
name: firebird-doc
arch: noarch
version: 3.0.13.33818
epoch: 0
release: 1.el7
summary: Documentation for Firebird SQL server
url: http://www.firebirdsql.org/
rpm_license: Interbase
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firebird-3.0.13.33818-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firebird-doc-3.0.13.33818-1.el7.noarch.rpm
checksum_type: sha256
description:
  Documentation for Firebird SQL server.

  Firebird is a relational database offering many ANSI SQL standard
  features that runs on Linux, Windows, and a variety of Unix platforms.
  Firebird offers excellent concurrency, high performance, and powerful
  language support for stored procedures and triggers. It has been used
  in production systems, under a variety of names, since 1981.


pkgId: 4dd83c7c855a38f94c3d33cbf930c9c19f8785798de2336ea5436db17f5310d7
name: firebird-examples
arch: noarch
version: 3.0.13.33818
epoch: 0
release: 1.el7
summary: Examples for Firebird SQL server
url: http://www.firebirdsql.org/
rpm_license: Interbase
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firebird-3.0.13.33818-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firebird-examples-3.0.13.33818-1.el7.noarch.rpm
checksum_type: sha256
description:
  Examples for Firebird SQL server.

  Firebird is a relational database offering many ANSI SQL standard
  features that runs on Linux, Windows, and a variety of Unix platforms.
  Firebird offers excellent concurrency, high performance, and powerful
  language support for stored procedures and triggers. It has been used
  in production systems, under a variety of names, since 1981.


pkgId: b3d2de6e163f9461558a50b0a0cacfdffd0f2c7806fd50e6120f14e776e0db97
name: firebird-utils
arch: i686
version: 3.0.13.33818
epoch: 0
release: 1.el7
summary: Firebird SQL user utilities
url: http://www.firebirdsql.org/
rpm_license: Interbase
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firebird-3.0.13.33818-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firebird-utils-3.0.13.33818-1.el7.i686.rpm
checksum_type: sha256
description:
  Firebird SQL user utilities.

  Firebird is a relational database offering many ANSI SQL standard
  features that runs on Linux, Windows, and a variety of Unix platforms.
  Firebird offers excellent concurrency, high performance, and powerful
  language support for stored procedures and triggers. It has been used
  in production systems, under a variety of names, since 1981.


pkgId: e5997f46bed78f1fe8b83751d3982fe400d99be4449753ffed8ae7a6a63cd97d
name: firefox
arch: i686
version: 102.10.0
epoch: 0
release: 1.el7.3
summary: Mozilla Firefox Web browser
url: https://www.mozilla.org/firefox/
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firefox-102.10.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: firefox-102.10.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  Mozilla Firefox is an open-source web browser, designed for standards
  compliance, performance and portability.


pkgId: fa14f9d57af2346f17ff95922c27ce503cce8f84172c6ac920ef4ae9b3bf27ec
name: firejail
arch: i686
version: 0.9.72
epoch: 0
release: 1.el7
summary: Linux namespaces sandbox program
url: https://github.com/netblue30/firejail
rpm_license: GPL-2.0-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firejail-0.9.72-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firejail-0.9.72-1.el7.i686.rpm
checksum_type: sha256
description:
  Firejail is a SUID sandbox program that reduces the risk of security
  breaches by restricting the running environment of untrusted applications
  using Linux namespaces. It includes a sandbox profile for Mozilla Firefox.


pkgId: 13efa6a3ee7a1c2769a85619354fd330a73b9dcec789d070e3b1ac11326de9b8
name: firewall-applet
arch: noarch
version: 0.8.2
epoch: 0
release: 1.el7
summary: Firewall panel applet
url: http://www.firewalld.org
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firewalld-0.8.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firewall-applet-0.8.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  The firewall panel applet provides a status information of firewalld and also
  the firewall settings.


pkgId: 914962d4a071bd7abb998a75f306907e0a0a494f594c4afd8801dce0eb2fa13d
name: firewalld
arch: noarch
version: 0.8.2
epoch: 0
release: 1.el7
summary: A firewall daemon with D-Bus interface providing a dynamic firewall
url: http://www.firewalld.org
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firewalld-0.8.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firewalld-0.8.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  firewalld is a firewall service daemon that provides a dynamic customizable
  firewall with a D-Bus interface.


pkgId: 3c7b6f0519ee186cbf06566aa436d93143bfce50ec647540be4b86e1f2fd9616
name: firewalld-filesystem
arch: noarch
version: 0.8.2
epoch: 0
release: 1.el7
summary: Firewalld directory layout and rpm macros
url: http://www.firewalld.org
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: firewalld-0.8.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: firewalld-filesystem-0.8.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides directories and rpm macros which
  are required by other packages that add firewalld configuration files.


pkgId: ad091233c8d06a289e5f37f788c687b374902f51ee622efd6974dc611840c990
name: flameshot
arch: i686
version: 12.1.0
epoch: 0
release: 1.el7
summary: Powerful and simple to use screenshot software.
description:
  Powerful and simple to use screenshot software with built-in
  editor with advanced features.

url: https://flameshot.org
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flameshot-12.1.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flameshot-12.1.0-1.el7.i686.rpm
checksum_type: sha256
rpm_license:
  GPL-3.0-or-later AND Apache-2.0 AND GPL-2.0-only AND LGPL-3.0-or-later AND (LGPL-3.0-only OR GPL-3.0-only) AND LAL-1.3


pkgId: f75d6829ccc4efa9bcce42929564c6ac553d6d9a89d20fd1b1abc3a814534a2b
name: flatpak
arch: i686
version: 1.10.6
epoch: 0
release: 1.el7
summary: Application deployment framework for desktop apps
url: http://flatpak.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flatpak-1.10.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flatpak-1.10.6-1.el7.i686.rpm
checksum_type: sha256
description:
  flatpak is a system for building, distributing and running sandboxed desktop
  applications on Linux. See https://wiki.gnome.org/Projects/SandboxedApps for
  more information.


pkgId: 981d84f67ce427ac256b2ab78be3202841871978e07b3be679dc42e831699ef2
name: flatpak-session-helper
arch: i686
version: 1.10.6
epoch: 0
release: 1.el7
summary: User D-Bus service used by flatpak and others
url: http://flatpak.org/
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flatpak-1.10.6-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flatpak-session-helper-1.10.6-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the org.freedesktop.Flatpak user D-Bus service
  that's used by flatpak and other packages.


pkgId: f8ca821607843ee82dcdf06b25443c579b3703ab1ca2c177a379154adcbaf49e
name: flit
arch: noarch
version: 3.12.0
epoch: 0
release: 1.el7
summary: Simplified packaging of Python modules.
url: https://flit.pypa.io
rpm_license: BSD-3-Clause AND Apache-2.0 AND PSF-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: python-flit-3.12.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flit-3.12.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Flit is a simple way to put Python packages and modules on PyPI.
  It tries to require less thought about packaging and help you avoid common
  mistakes.

  Flit packages a single importable module or package at a time, using the import
  name as the name on PyPI. All sub-packages and data files within a package are
  included automatically.


pkgId: f581195c7b5924c34e6045ae4f1bbcf4dd0a98eb81a2b57190e5c54cee779ca0
name: flite
arch: i686
version: 2.2
epoch: 0
release: 1.el7
summary: Small, fast speech synthesis engine (text-to-speech)
url: http://www.speech.cs.cmu.edu/flite/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flite-2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flite-2.2-1.el7.i686.rpm
checksum_type: sha256
description:
  Flite (festival-lite) is a small, fast run-time speech synthesis engine
  developed at CMU and primarily designed for small embedded machines and/or
  large servers. Flite is designed as an alternative synthesis engine to
  Festival for voices built using the FestVox suite of voice building tools.


pkgId: c1939f92314acfbe1289897f8fc25dd97639c6cb3605a8af2007e2d322897ed4
name: flow-tools
arch: i686
version: 0.68.5.1
epoch: 0
release: 1.el7
summary: Tool set for working with NetFlow data
url: http://code.google.com/p/flow-tools/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flow-tools-0.68.5.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flow-tools-0.68.5.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Flow-tools is library and a collection of programs used to collect,
  send, process, and generate reports from NetFlow data. The tools can be
  used together on a single server or distributed to multiple servers for
  large deployments. The flow-toools library provides an API for development
  of custom applications for NetFlow export versions 1,5,6 and the 14 currently
  defined version 8 subversions. A Perl and Python interface have been
  contributed and are included in the distribution.


pkgId: 168063cd3e63e4990b9699670a76e5b4808debb0882a4728e6bdb4fca95a5b2e
name: flow-tools-devel
arch: i686
version: 0.68.5.1
epoch: 0
release: 1.el7
summary: Development files for flow-tools
url: http://code.google.com/p/flow-tools/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flow-tools-0.68.5.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flow-tools-devel-0.68.5.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Flow-tools is library and a collection of programs used to collect,
  send, process, and generate reports from NetFlow data. The tools can be
  used together on a single server or distributed to multiple servers for
  large deployments. The flow-toools library provides an API for development
  of custom applications for NetFlow export versions 1,5,6 and the 14 currently
  defined version 8 subversions. A Perl and Python interface have been
  contributed and are included in the distribution.

  This package contains header files required to build applications that use
  libft.


pkgId: 1aad87579a7dfbe84de7b977182decbe984853976349590937ab5371c4a6c2fa
name: flow-tools-docs
arch: i686
version: 0.68.5.1
epoch: 0
release: 1.el7
summary: HTML and other redundant docs for flow-tools
url: http://code.google.com/p/flow-tools/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flow-tools-0.68.5.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flow-tools-docs-0.68.5.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Flow-tools is library and a collection of programs used to collect,
  send, process, and generate reports from NetFlow data. The tools can be
  used together on a single server or distributed to multiple servers for
  large deployments. The flow-toools library provides an API for development
  of custom applications for NetFlow export versions 1,5,6 and the 14 currently
  defined version 8 subversions. A Perl and Python interface have been
  contributed and are included in the distribution.

  This package contains additional documentation, such as man pages in html format.


pkgId: 3f9451076d5bd0f22f2f0ed11315dd8c00413fbdb9a223b54fa58d49577f0aa3
name: flow-tools-rrdtool
arch: i686
version: 0.68.5.1
epoch: 0
release: 1.el7
summary: Scripts for flow-tools to build rrd graphs
url: http://code.google.com/p/flow-tools/
rpm_license: BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: flow-tools-0.68.5.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: flow-tools-rrdtool-0.68.5.1-1.el7.i686.rpm
checksum_type: sha256
description:
  Flow-tools is library and a collection of programs used to collect,
  send, process, and generate reports from NetFlow data. The tools can be
  used together on a single server or distributed to multiple servers for
  large deployments. The flow-toools library provides an API for development
  of custom applications for NetFlow export versions 1,5,6 and the 14 currently
  defined version 8 subversions. A Perl and Python interface have been
  contributed and are included in the distribution.

  This package contains scripts that use python-rrdtool to create rrds and graphs
  from flow data.


pkgId: d74b01c14ebb66a398c389ad0667a3ae1164188a9d418795f35bb9deb8d22060
name: fluent-bit
arch: x86_64
version: 4.2.2
epoch: 0
release: 1.el7
summary: High-performance log and metrics processor and forwarder
url: https://github.com/fluent/fluent-bit
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fluent-bit-4.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fluent-bit-4.2.2-1.el7.x86_64.rpm
checksum_type: sha256
description:
  Fluent Bit is a high-performance data processor designed for efficient
  collection, parsing, filtering, and forwarding of logs and metrics. It
  features low memory footprint and high throughput, making it suitable
  for containerized, embedded, and cloud-native environments.


pkgId: 4f7c6fc2836a840cf39f8cdacaba2404197b300834d138f14bd4c50d63864a99
name: fluent-bit-devel
arch: x86_64
version: 4.2.2
epoch: 0
release: 1.el7
summary: Development files for Fluent Bit
url: https://github.com/fluent/fluent-bit
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fluent-bit-4.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fluent-bit-devel-4.2.2-1.el7.x86_64.rpm
checksum_type: sha256
description:
  The fluent-bit-devel package provides header files, development
  libraries, and pkg-config metadata required to build applications and
  plugins that integrate with Fluent Bit.


pkgId: b35736fcd9f937b6fe3648428394e43ca5e4f529f9467dab9f6c99b1c3f92af9
name: fmt
arch: i686
version: 11.2.0
epoch: 0
release: 1.el7
summary: Small, safe and fast formatting library for C++
url: https://github.com/fmtlib/fmt
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fmt-11.2.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fmt-11.2.0-1.el7.i686.rpm
checksum_type: sha256
description:
  C++ Format is an open-source formatting library for C++. It can be used as a
  safe alternative to printf or as a fast alternative to IOStreams.


pkgId: 2c66927450f3c8cbd2daf0f91ac1eeddfaae1f60960578c2a21bf89b5554267f
name: folks
arch: i686
version: 0.15.5
epoch: 1
release: 1.el7
summary: GObject contact aggregation library
url: https://wiki.gnome.org/Projects/Folks
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: folks-0.15.5-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: folks-0.15.5-1.el7.i686.rpm
checksum_type: sha256
description:
  libfolks is a library that aggregates people from multiple sources (e.g.
  Telepathy connection managers and eventually evolution data server,
  Facebook, etc.) to create meta-contacts.


pkgId: 05d28d4cce024b3730a659d9b2bfec09fc1d3c927c5995ab86fdfca814a52b59
name: folks-devel
arch: i686
version: 0.15.5
epoch: 1
release: 1.el7
summary: Development files for folks
url: https://wiki.gnome.org/Projects/Folks
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: folks-0.15.5-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: folks-devel-0.15.5-1.el7.i686.rpm
checksum_type: sha256
description:
  The folks-devel package contains libraries and header files for
  developing applications that use folks.


pkgId: b43444c43ff1bb8223081f7eff23208fd235627bf75a676eeef14ce6e1c04465
name: fontawesome4-fonts
arch: noarch
version: 4.7.0
epoch: 0
release: 2.el7
summary: Iconic font set
url: http://fontawesome.io
rpm_license: OFL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome4-fonts-4.7.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome4-fonts-4.7.0-2.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized — size, color, drop shadow, and anything that can be done with the
  power of CSS.
  This package contains OpenType and TrueType font files which are typically used
  locally.


pkgId: 52f6482fc95c9e55c0eaf04cf2830ffcbdd9cfe33800bd0b44a842399bc2b228
name: fontawesome4-fonts-web
arch: noarch
version: 4.7.0
epoch: 0
release: 2.el7
summary: Iconic font set, web files
url: http://fontawesome.io
rpm_license: OFL and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome4-fonts-4.7.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome4-fonts-web-4.7.0-2.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized — size, color, drop shadow, and anything that can be done with the
  power of CSS.
  This package contains CSS, SCSS and LESS style files as well as Web Open Font
  Format versions 1 and 2, Embedded OpenType and SVG font files which are
  typically used on the web.


pkgId: d8120a777644edf19a9a17a6ab75e82051dd0414791d3d8e6a8c23afdfd9c5d1
name: fontawesome5-brands-fonts
arch: noarch
version: 5.15.4
epoch: 0
release: 1.el7
summary: Iconic font set
url: https://fontawesome.com/
rpm_license: OFL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome5-fonts-5.15.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome5-brands-fonts-5.15.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized - size, color, drop shadow, and anything that can be done
  with the power of CSS.
  The FontAwesome Brand Fonts contain brand logos packaged as font files.


pkgId: a144aaae1eb1d62216a279d7e453a11185073958e8683301b1bce372f2ec178d
name: fontawesome5-fonts
arch: noarch
version: 5.15.4
epoch: 0
release: 1.el7
summary: Support files for the FontAwesome 5 fonts
url: https://fontawesome.com/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome5-fonts-5.15.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome5-fonts-5.15.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized - size, color, drop shadow, and anything that can be done
  with the power of CSS.

  This package contains CSS, SCSS and LESS style files for each of the
  fonts in the FontAwesome family, as well as JSON and YAML metadata.


pkgId: bb65d8539d656d1fc9808eb8d6523742b7277d8de00f46b2150854733adee26b
name: fontawesome5-fonts-all
arch: noarch
version: 5.15.4
epoch: 0
release: 1.el7
summary: All the font packages, generated from fontawesome5-fonts
url: https://fontawesome.com/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome5-fonts-5.15.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome5-fonts-all-5.15.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  This meta-package installs all the font packages, generated from the
  fontawesome5-fonts source package.


pkgId: c51769eeee6a3292b239a37fe26a5c7e1affbdc8b3fc33813b72f1599c8fcc8c
name: fontawesome5-fonts-web
arch: noarch
version: 5.15.4
epoch: 0
release: 1.el7
summary: Iconic font set, javascript and SVG files
url: https://fontawesome.com/
rpm_license: CC-BY
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome5-fonts-5.15.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome5-fonts-web-5.15.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized - size, color, drop shadow, and anything that can be done
  with the power of CSS.

  This package contains javascript and SVG files, which are typically used
  on web pages.


pkgId: f39f1306a0a2c1c87243dd83d37a4e30835999e7ed491fadc0167044c1a608fd
name: fontawesome5-free-fonts
arch: noarch
version: 5.15.4
epoch: 0
release: 1.el7
summary: Iconic font set
url: https://fontawesome.com/
rpm_license: OFL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontawesome5-fonts-5.15.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontawesome5-free-fonts-5.15.4-1.el7.noarch.rpm
checksum_type: sha256
description:
  Font Awesome gives you scalable vector icons that can instantly be
  customized - size, color, drop shadow, and anything that can be done
  with the power of CSS.
  The FontAwesome Free Fonts contain large numbers of icons packaged as
  font files.


pkgId: 353bdc658e5043dff96185f38378bdf75b63833c09a7e994ea938d5aeb8a280e
name: fontconfig
arch: i686
version: 2.14.2
epoch: 0
release: 2.el7
summary: Font configuration and customization library
url: http://fontconfig.org
rpm_license: MIT and Public Domain and UCD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontconfig-2.14.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontconfig-2.14.2-2.el7.i686.rpm
checksum_type: sha256
description:
  Fontconfig is designed to locate fonts within the
  system and select them according to requirements specified by
  applications.


pkgId: fb8873a53809e453eca9c772267177f2bcb2b59c7aca22cf9dc49ecd0b7c5e77
name: fontconfig-devel
arch: i686
version: 2.14.2
epoch: 0
release: 2.el7
summary: Font configuration and customization library
url: http://fontconfig.org
rpm_license: MIT and Public Domain and UCD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontconfig-2.14.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontconfig-devel-2.14.2-2.el7.i686.rpm
checksum_type: sha256
description:
  The fontconfig-devel package includes the header files,
  and developer docs for the fontconfig package.

  Install fontconfig-devel if you want to develop programs which
  will use fontconfig.


pkgId: 7f577bcc81302ba65368febf2e3c34502e8d22cfd08ca5b56e79639ac511c190
name: fontconfig-devel-doc
arch: noarch
version: 2.14.2
epoch: 0
release: 2.el7
summary: Development Documentation files for fontconfig library
url: http://fontconfig.org
rpm_license: MIT and Public Domain and UCD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontconfig-2.14.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontconfig-devel-doc-2.14.2-2.el7.noarch.rpm
checksum_type: sha256
description:
  The fontconfig-devel-doc package contains the documentation files
  which is useful for developing applications that uses fontconfig.


pkgId: f0278f6289bd58900083fee9b3d5ee8d2153880b49ba0a4c77cb508fa513a3d9
name: fontforge
arch: i686
version: 20190801
epoch: 0
release: 8.el7
summary: Outline and bitmap font editor
url: http://fontforge.github.io/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontforge-20190801-8.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontforge-20190801-8.el7.i686.rpm
checksum_type: sha256
description:
  FontForge (former PfaEdit) is a font editor for outline and bitmap
  fonts. It supports a range of font formats, including PostScript
  (ASCII and binary Type 1, some Type 3 and Type 0), TrueType, OpenType
  (Type2) and CID-keyed fonts.


pkgId: 98e31e50806a70abc6086b32a1256c40bc82195e2cadf6394155793b660e4d92
name: fontforge-devel
arch: i686
version: 20190801
epoch: 0
release: 8.el7
summary: Development tools for fontforge
url: http://fontforge.github.io/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fontforge-20190801-8.el7.src.rpm
rpm_packager: RED SOFT
location_href: fontforge-devel-20190801-8.el7.i686.rpm
checksum_type: sha256
description:
  This package includes the libraries and header files you will need
  to compile applications against fontforge.


pkgId: d982a8eb081ed5bf463d9bb82655720b19e447bfa063c548d994ae229c857169
name: fonts-filesystem
arch: noarch
version: 2.0.5
epoch: 0
release: 3.el7
summary: Directories used by font packages
url: https://pagure.io/fonts-rpm-macros
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fonts-rpm-macros-2.0.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fonts-filesystem-2.0.5-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains the basic directory layout used by font packages,
  including the correct permissions for the directories.


pkgId: a45fa8c0bb4cd9dd2e15de413181bb8953c7794e4926879754503563b1ac22a9
name: fonts-rpm-macros
arch: noarch
version: 2.0.5
epoch: 0
release: 3.el7
summary: Build-stage rpm automation for fonts packages
url: https://pagure.io/fonts-rpm-macros
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fonts-rpm-macros-2.0.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fonts-rpm-macros-2.0.5-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides build-stage rpm automation to simplify the creation of
  fonts packages.

  It does not need to be included in the default build root: fonts-srpm-macros
  will pull it in for fonts packages only.


pkgId: 03583a511436796683ae737f79fb5ffe2a34bf94113ff106acf8e6f4347ff118
name: fonts-rpm-templates
arch: noarch
version: 2.0.5
epoch: 0
release: 3.el7
summary: Example fonts packages rpm spec templates
url: https://pagure.io/fonts-rpm-macros
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fonts-rpm-macros-2.0.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fonts-rpm-templates-2.0.5-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package contains documented rpm spec templates showcasing how to use the
  macros provided by fonts-rpm-macros to create fonts packages.


pkgId: 659e6caea1889118046a68c6463f12cfe3e353a3bb79aebf8fc0b8c1dd89d22d
name: fonts-srpm-macros
arch: noarch
version: 2.0.5
epoch: 0
release: 3.el7
summary: Source-stage rpm automation for fonts packages
url: https://pagure.io/fonts-rpm-macros
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fonts-rpm-macros-2.0.5-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: fonts-srpm-macros-2.0.5-3.el7.noarch.rpm
checksum_type: sha256
description:
  This package provides SRPM-stage rpm automation to simplify the creation of
  fonts packages.

  It limits itself to the automation subset required to create fonts SRPM
  packages and needs to be included in the default build root.

  The rest of the automation is provided by the fonts-rpm-macros package, that
  fonts-srpm-macros will pull in for fonts packages only.


pkgId: 45dcdbeb3eb2453cce648df73a182a86f8ec88d92b4047fcdae7977467f38429
name: foreman
arch: noarch
version: 3.3.0
epoch: 0
release: 1.el7
summary: Systems Management web application
url: https://theforeman.org
rpm_license: GPLv3+ with exceptions
rpm_vendor: RED SOFT
rpm_group: Applications/System
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: foreman-3.3.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: foreman-3.3.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Foreman is aimed to be a Single Address For All Machines Life Cycle Management.
  Foreman is based on Ruby on Rails, and this package bundles Rails and all
  plugins required for Foreman to work.


pkgId: 29f79f4b3f69c17500fdff81ef67134a91ff490aaf333da56b7956770097b313
name: foreman-proxy
arch: noarch
version: 3.3.0
epoch: 0
release: 1.el7
summary: Restful Proxy for DNS, DHCP, TFTP, PuppetCA and Puppet
url: https://theforeman.org/projects/smart-proxy
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Applications/System
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: foreman-proxy-3.3.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: foreman-proxy-3.3.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  Manages DNS, DHCP, TFTP and puppet settings though HTTP Restful API
  Mainly used by the foreman project (https://theforeman.org)


pkgId: 66c467f0052b6d5e95973fa4374317f8ef5cd94cc880ee7fd719167a92ac05ce
name: fpc
arch: i686
version: 3.2.2
epoch: 0
release: 1.el7
summary: Free Pascal Compiler.
url: http://www.freepascal.org
rpm_license: GPLv2+ and LGPLv2+ with exceptions
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fpc-3.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fpc-3.2.2-1.el7.i686.rpm
checksum_type: sha256
description:
  Free Pascal is a free 32/64bit Pascal Compiler. It comes with a run-time
  library and is fully compatible with Turbo Pascal 7.0 and nearly Delphi
  compatible. Some extensions are added to the language, like function
  overloading and generics. Shared libraries can be linked. This package
  contains the command-line compiler and utilities.


pkgId: acbc55c74c8e48ad54588ed5613c3d8ee0748ac83bb76acfa4e605e26ce95619
name: fpc-src
arch: noarch
version: 3.2.2
epoch: 0
release: 1.el7
summary: Free Pascal Compiler - sources.
url: http://www.freepascal.org
rpm_license: GPLv2+ and LGPLv2+ with exceptions
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fpc-3.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fpc-src-3.2.2-1.el7.noarch.rpm
checksum_type: sha256
description:
  The fpc-src package contains the sources of Free Pascal, for documentation or
  automatical-code generation purposes.


pkgId: a21bb6d0f5433b61dfaf7c31c42aa95dfdf5b645698c60e2e156ab6ee3caaae3
name: fpc-units-i386-linux
arch: i686
version: 3.2.2
epoch: 0
release: 1.el7
summary: Free Pascal Compiler - units for i386-linux.
url: http://www.freepascal.org
rpm_license: GPLv2+ and LGPLv2+ with exceptions
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fpc-3.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fpc-units-i386-linux-3.2.2-1.el7.i686.rpm
checksum_type: sha256
description:
  This package provides pre-compiled unit files for developing Free Pascal
  applications for Linux (i386 processor architecture). It includes
  the runtime library (RTL), the free component library (FCL) and packages.


pkgId: 6de27e0bfbab6ddf23032d7f7282ebfbd942c4b318eb636bb0497d4f4abf9ea1
name: fpc-units-x86_64-linux
arch: x86_64
version: 3.2.2
epoch: 0
release: 1.el7
summary: Free Pascal Compiler - units for x86_64-linux.
url: http://www.freepascal.org
rpm_license: GPLv2+ and LGPLv2+ with exceptions
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fpc-3.2.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fpc-units-x86_64-linux-3.2.2-1.el7.x86_64.rpm
checksum_type: sha256
description:
  This package provides pre-compiled unit files for developing Free Pascal
  applications for Linux (x86_64 processor architecture). It includes
  the runtime library (RTL), the free component library (FCL) and packages.


pkgId: 9c6156c76572aebb0cb6707640e8a43dead6b1a0c29ca52a9c2af4534520cec5
name: fping
arch: i686
version: 5.0
epoch: 0
release: 1.el7
summary: Scriptable, parallelized ping-like utility
url: http://www.fping.org/
rpm_license: BSD with advertising
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fping-5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fping-5.0-1.el7.i686.rpm
checksum_type: sha256
description:
  fping is a ping-like program which can determine the accessibility of
  multiple hosts using ICMP echo requests. fping is designed for parallelized
  monitoring of large numbers of systems, and is developed with ease of
  use in scripting in mind.


pkgId: 8d7c4617d79c9b15f38e2b3d937fb1ce27df6051798d7ed69179a1fe792eeb2a
name: fprobe
arch: i686
version: 1.1
epoch: 0
release: 1.el7
summary: NetFlow probe
url: http://fprobe.sourceforge.net/
rpm_license: GPL-2.0
rpm_vendor: RED SOFT
rpm_group: Productivity/Networking/Diagnostic
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fprobe-1.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fprobe-1.1-1.el7.i686.rpm
checksum_type: sha256
description:
  libpcap-based tool, that collects network traffic data and emits it as
  NetFlow-flows towards the specified collector.


pkgId: 1b3b018dd7cca035c393d87a5dc8832212abc9d11664de7ee7bd97ebe4da76f9
name: fprobe-ulog
arch: i686
version: 1.2
epoch: 0
release: 1.el7
summary: NetFlow probe
url: https://github.com/opoplawski/fprobe-ulog
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fprobe-ulog-1.2-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fprobe-ulog-1.2-1.el7.i686.rpm
checksum_type: sha256
description:
  fprobe-ulog - libipulog-based tool that collect network traffic data and emit
  it as NetFlow flows towards the specified collector.


pkgId: 4fae176229d8abffbb6b5e52e4651a07ec15419373808f6f5e02bc0b0c0d3764
name: freeimage
arch: i686
version: 3.18.0
epoch: 0
release: 2.el7
summary: Multi-format image decoder library
url: http://freeimage.sourceforge.net/
rpm_license: GPLv2 or GPLv3 or MPLv1.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeimage-3.18.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeimage-3.18.0-2.el7.i686.rpm
checksum_type: sha256
description:
  FreeImage is a library for developers who would like to support popular
  graphics image formats like PNG, BMP, JPEG, TIFF and others as needed by
  today's multimedia applications.


pkgId: 759c434ff414dd2d092986e5175aa5e78c2e738668557c74115559444d4d1523
name: freeimage-devel
arch: i686
version: 3.18.0
epoch: 0
release: 2.el7
summary: Development files for freeimage
url: http://freeimage.sourceforge.net/
rpm_license: GPLv2 or GPLv3 or MPLv1.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeimage-3.18.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeimage-devel-3.18.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The freeimage-devel package contains libraries and header files for
  developing applications that use freeimage.


pkgId: 1a69ecc83a68462a694a3d876f0ef2c77ad632413c8b35e65f260bc7baa5e4d7
name: freeimage-plus-devel
arch: i686
version: 3.18.0
epoch: 0
release: 2.el7
summary: Development files for freeimage-devel
url: http://freeimage.sourceforge.net/
rpm_license: GPLv2 or GPLv3 or MPLv1.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeimage-3.18.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeimage-plus-devel-3.18.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The freeimage-devel package contains libraries and header files for
  developing applications that use freeimage-plus.


pkgId: d61102f8cc55ede85ed4df7e3eb81a007a099bbf0ba0bccb3f31b6f322a51783
name: freeradius
arch: i686
version: 3.0.21
epoch: 0
release: 1.el7
summary: High-performance and highly configurable free RADIUS server
url: http://www.freeradius.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeradius-3.0.21-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeradius-3.0.21-1.el7.i686.rpm
checksum_type: sha256
description:
  The FreeRADIUS Server Project is a high performance and highly configurable
  GPL'd free RADIUS server. The server is similar in some respects to
  Livingston's 2.0 server.  While FreeRADIUS started as a variant of the
  Cistron RADIUS server, they don't share a lot in common any more. It now has
  many more features than Cistron or Livingston, and is much more configurable.

  FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
  protocol, as defined in RFC 2865 (and others). It allows Network Access
  Servers (NAS boxes) to perform authentication for dial-up users. There are
  also RADIUS clients available for Web servers, firewalls, Unix logins, and
  more.  Using RADIUS allows authentication and authorization for a network to
  be centralized, and minimizes the amount of re-configuration which has to be
  done when adding or deleting new users.


pkgId: 7143b977a50a11b20e0ea746060ce3731f32ad37ae004b9494bb6bfb8731246b
name: freeradius-perl
arch: i686
version: 3.0.21
epoch: 0
release: 1.el7
summary: Perl support for freeradius
url: http://www.freeradius.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeradius-3.0.21-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeradius-perl-3.0.21-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin provides the Perl support for the FreeRADIUS server project.







  Provides: python-freeradius = 3.0.21-1.el7
  Obsoletes: python-freeradius < 3.0.21-1.el7


pkgId: 4e5ba6c5e9afb8b7043b09d505faeddced048795a88f1c3e434b3aade04ed6a0
name: freeradius-utils
arch: i686
version: 3.0.21
epoch: 0
release: 1.el7
summary: FreeRADIUS utilities
url: http://www.freeradius.org/
rpm_license: GPLv2+ and LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeradius-3.0.21-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeradius-utils-3.0.21-1.el7.i686.rpm
checksum_type: sha256
description:
  The FreeRADIUS server has a number of features found in other servers,
  and additional features not found in any other server. Rather than
  doing a feature by feature comparison, we will simply list the features
  of the server, and let you decide if they satisfy your needs.

  Support for RFC and VSA Attributes Additional server configuration
  attributes Selecting a particular configuration Authentication methods


pkgId: 6da14b15799e6e4c62762dedeb8b8b1beaaf04244d21c2c4806c6d095f92e5ea
name: freerdp
arch: i686
version: 2.3.2.gite5eb636
epoch: 2
release: 1.el7.3
summary: Remote Desktop Viewer Client
url: https://www.freerdp.com/
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Productivity/Networking/Other
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-2.3.2.gite5eb636-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-2.3.2.gite5eb636-1.el7.3.i686.rpm
checksum_type: sha256
description:
  FreeRDP is a client-side implementation of the Remote Desktop Protocol (RDP)
  following the Microsoft Open Specifications. This package provides the client
  application.


pkgId: 6c81b364cc748bf7c0700f3782cd80ecd69363f560f6feab1dbcc476c17a8d93
name: freerdp
arch: i686
version: 2.4.1
epoch: 2
release: 1.el7.3
summary: Free implementation of the Remote Desktop Protocol (RDP)
url: http://www.freerdp.com/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-2.4.1-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-2.4.1-1.el7.3.i686.rpm
checksum_type: sha256
description:
  The xfreerdp & wlfreerdp Remote Desktop Protocol (RDP) clients from the FreeRDP
  project.

  xfreerdp & wlfreerdp can connect to RDP servers such as Microsoft Windows
  machines, xrdp and VirtualBox.


pkgId: 7cb8df75310f521daa4fb54e8088f669cb84fbed864e85f565d4cbc7eee28514
name: freerdp
arch: i686
version: 2.8.0
epoch: 3
release: 2.el7
summary: Free implementation of the Remote Desktop Protocol (RDP)
url: http://www.freerdp.com/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-2.8.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-2.8.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The xfreerdp is a Remote Desktop Protocol (RDP) clients from the FreeRDP
  project.

  xfreerdp can connect to RDP servers such as Microsoft Windows
  machines, xrdp and VirtualBox.


pkgId: deb92651105bb9d9164ad69cc82922523b25867cf6eb8f02acc343fcad376de6
name: freerdp-default-devel
arch: i686
version: 3.8.0
epoch: 3
release: 1.el7
summary: Development files for freerdp
url: http://www.freerdp.com/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-3.8.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-default-devel-3.8.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The freerdp-devel package contains libraries and header files for developing
  applications that use freerdp-libs.


pkgId: b0eda51e84736cb3a547785f2fb37f3ab3350a5182824d76a6302cb38b080674
name: freerdp-default-libs
arch: i686
version: 3.8.0
epoch: 3
release: 1.el7
summary: Core libraries implementing the RDP protocol
url: http://www.freerdp.com/
rpm_license: ASL 2.0
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-3.8.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-default-libs-3.8.0-1.el7.i686.rpm
checksum_type: sha256
description:
  libfreerdp-core can be embedded in applications.

  libfreerdp-channels and libfreerdp-kbd might be convenient to use in X
  applications together with libfreerdp-core.

  libfreerdp-core can be extended with plugins handling RDP channels.


pkgId: 990778d7e00ec8f4b2d016bbdf2ec8228a209eec19f0840cec112b0f0d0ec575
name: freerdp-gui
arch: noarch
version: 3.0
epoch: 0
release: 2.el7
summary: GUI for freerdp client
url: http://git.red-soft.biz/vladlen.murylyov/freerdp-gui
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-gui-3.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-gui-3.0-2.el7.noarch.rpm
checksum_type: sha256
description:
  This is a GUI xfreerdp client. Based on manual https://redos.red-soft.ru/server-configuring/remote-control/xfreerdp/


pkgId: 30b4d2a52c620f3479808a4f6fc79261d37ae4272f7d8598bee949c82db87f19
name: freerdp-gui
arch: noarch
version: 3.1
epoch: 0
release: 1.el7
summary: GUI for freerdp client
url: http://git.red-soft.biz/vladlen.murylyov/freerdp-gui
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp-gui-3.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freerdp-gui-3.1-1.el7.noarch.rpm
checksum_type: sha256
description:
  This is a GUI freerdp client. Based on manual https://redos.red-soft.ru/server-configuring/remote-control/xfreerdp/


pkgId: e6a550020d760f28b7f37284d19b2db3004ebc2ee2257f42ba01dda2309cb866
name: freerdp2-devel
arch: i686
version: 2.2.0
epoch: 2
release: 1.el7.3
summary: Development files for freerdp2
url: https://www.freerdp.com/
rpm_license: Apache-2.0
rpm_vendor: RED SOFT
rpm_group: Productivity/Networking/Other
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freerdp2-2.2.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freerdp2-devel-2.2.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  The freerdp2-devel package contains libraries and header files for developing
  applications that use freerdp2-libs.


pkgId: 451836a42c22fe03a28f0b661bb979a73471e0ae28340da5c596dca7b4581d16
name: freetds
arch: i686
version: 1.3.12
epoch: 0
release: 1.el7.3
summary: Implementation of the TDS (Tabular DataStream) protocol
url: http://www.freetds.org/
rpm_license: LGPLv2+ and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetds-1.3.12-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freetds-1.3.12-1.el7.3.i686.rpm
checksum_type: sha256
description:
  FreeTDS is a project to document and implement the TDS (Tabular
  DataStream) protocol. TDS is used by Sybase(TM) and Microsoft(TM) for
  client to database server communications. FreeTDS includes call
  level interfaces for DB-Lib, CT-Lib, and ODBC.


pkgId: 8bda21b6006dde305ffad769cc504fe9d9c8f392811e5ff7a1be8209f9bb18f0
name: freetds-devel
arch: i686
version: 1.3.12
epoch: 0
release: 1.el7.3
summary: Header files and development libraries for freetds
url: http://www.freetds.org/
rpm_license: LGPLv2+ and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetds-1.3.12-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freetds-devel-1.3.12-1.el7.3.i686.rpm
checksum_type: sha256
description:
  This package contains the header files and development libraries
  for freetds. If you like to develop programs using freetds, you will need
  to install freetds-devel.


pkgId: eb9627f63e351677f485d18940563637af8ff078d2bded3337124b51cf2c952f
name: freetds-doc
arch: noarch
version: 1.3.12
epoch: 0
release: 1.el7.3
summary: Development documentation for freetds
url: http://www.freetds.org/
rpm_license: LGPLv2+ and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetds-1.3.12-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freetds-doc-1.3.12-1.el7.3.noarch.rpm
checksum_type: sha256
description:
  This package contains the development documentation for freetds.
  If you like to develop programs using freetds, you will need to install
  freetds-doc.


pkgId: 77d2d5004b2cf78ec984bb2d1b14c787e28571bcc7067fd820dd2a753172c409
name: freetds-libs
arch: i686
version: 1.3.12
epoch: 0
release: 1.el7.3
summary: Libraries for freetds
url: http://www.freetds.org/
rpm_license: LGPLv2+ and GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetds-1.3.12-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: freetds-libs-1.3.12-1.el7.3.i686.rpm
checksum_type: sha256
description:
  FreeTDS is a project to document and implement the TDS (Tabular
  DataStream) protocol. TDS is used by Sybase(TM) and Microsoft(TM) for
  client to database server communications. FreeTDS includes call
  level interfaces for DB-Lib, CT-Lib, and ODBC.
  This package contains the libraries for freetds.


pkgId: 194477e288913bd163b4976d2d1113118b45904661baecb04ebee0efdb21fbda
name: freetype
arch: i686
version: 2.13.0
epoch: 0
release: 2.el7
summary: A free and portable font rendering engine
url: http://www.freetype.org
rpm_license: (FTL or GPLv2+) and BSD and MIT and Public Domain and zlib with acknowledgement
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetype-2.13.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freetype-2.13.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The FreeType engine is a free and portable font rendering
  engine, developed to provide advanced font support for a variety of
  platforms and environments. FreeType is a library which can open and
  manages font files as well as efficiently load, hint and render
  individual glyphs. FreeType is not a font server or a complete
  text-rendering library.


pkgId: 9ab7f4af7b2631a78c32304c2d39539a57085875127330baec6ea8e658897512
name: freetype-devel
arch: i686
version: 2.13.0
epoch: 0
release: 2.el7
summary: FreeType development libraries and header files
url: http://www.freetype.org
rpm_license: (FTL or GPLv2+) and BSD and MIT and Public Domain and zlib with acknowledgement
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freetype-2.13.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: freetype-devel-2.13.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The freetype-devel package includes the static libraries and header files
  for the FreeType font rendering engine.

  Install freetype-devel if you want to develop programs which will use
  FreeType.


pkgId: fbc37e33495a9a5d41c5a19e796e582adf827289371e7d1e807a2b4b6b763c07
name: freexl
arch: i686
version: 2.0.0
epoch: 0
release: 1.el7
summary: Library to extract data from within an Excel spreadsheet.
url: https://www.gaia-gis.it/fossil/freexl/index
rpm_license: MPL-1.1 OR GPL-2.0-or-later OR LGPL-2.1-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freexl-2.0.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freexl-2.0.0-1.el7.i686.rpm
checksum_type: sha256
description:
  FreeXL is a library to extract valid data from within spreadsheets.
  Design goals:
    • to be simple and lightweight
    • to be stable, robust and efficient
    • to be easily and universally portable
    • completely ignoring any GUI-related oddity


pkgId: 11b6cee2ef8e46bb9647aee75fe610bdaaae848392860207b35ad890e7ced9ad
name: freexl-devel
arch: i686
version: 2.0.0
epoch: 0
release: 1.el7
summary: Development Libraries for FreeXL
url: https://www.gaia-gis.it/fossil/freexl/index
rpm_license: MPL-1.1 OR GPL-2.0-or-later OR LGPL-2.1-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freexl-2.0.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: freexl-devel-2.0.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The freexl-devel package contains libraries and header files for
  developing applications that use freexl.


pkgId: b4a99989c98f5d2247c41ce09d6b8b650dbdee50ce1a140b2fea3b6b52f28bad
name: freeze
arch: i686
version: 2.5.0
epoch: 0
release: 23.el7
summary: freeze/melt/fcat compression utilities
rpm_license: GPL+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: freeze-2.5.0-23.el7.src.rpm
rpm_packager: RED SOFT
location_href: freeze-2.5.0-23.el7.i686.rpm
checksum_type: sha256
description:
  Freeze is an old file compressor and decompressor that is not in
  common use anymore, but can be useful if the need ever arises to
  dearchive files compressed with it.


pkgId: 85213da4e4190d4608ccfcb1acd277817a40fecbd6aedbac7890d09680aeea7b
name: frei0r-devel
arch: i686
version: 1.7.0
epoch: 0
release: 1.el7
summary: Development files for frei0r-plugins
url: https://frei0r.dyne.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: frei0r-plugins-1.7.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: frei0r-devel-1.7.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The frei0r-plugins-devel package contains libraries and header files for
  developing applications that use frei0r-plugins.


pkgId: 59f98f8cc3473f5cf9016d22430da44d57cc83c0e5d6f79509d3811fcc74662f
name: frei0r-plugins
arch: i686
version: 1.7.0
epoch: 0
release: 1.el7
summary: Frei0r - a minimalist plugin API for video effects
url: https://frei0r.dyne.org/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: frei0r-plugins-1.7.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: frei0r-plugins-1.7.0-1.el7.i686.rpm
checksum_type: sha256
description:
  It is a minimalist plugin API for video sources and filters. The behavior of
  the effects can be controlled from the host by simple parameters. The intent is
  to solve the recurring re-implementation or adaptation issue of standard effect


pkgId: 808c35e0631f146fb0549f0dd961368113bc6e82e62fe98fed81537ed001af64
name: fribidi
arch: i686
version: 1.0.13
epoch: 0
release: 1.el7
summary: Library implementing the Unicode Bidirectional Algorithm
url: https://github.com/fribidi/fribidi/
rpm_license: LGPLv2+ and UCD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fribidi-1.0.13-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fribidi-1.0.13-1.el7.i686.rpm
checksum_type: sha256
description:
  A library to handle bidirectional scripts (for example Hebrew, Arabic),
  so that the display is done in the proper way; while the text data itself
  is always written in logical order.


pkgId: 719a6e8162c27c6a37ad3c67587cb67474aba290163ee8822ee9e16e7ed2ccae
name: frr
arch: i686
version: 10.1
epoch: 0
release: 1.el7
summary: Routing daemon.
url: http://www.frrouting.org
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: frr-10.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: frr-10.1-1.el7.i686.rpm
checksum_type: sha256
description:
  FRRouting is free software that manages TCP/IP based routing protocols. It takes
  a multi-server and multi-threaded approach to resolve the current complexity
  of the Internet.

  FRRouting supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng, PIM, NHRP, PBR,
  EIGRP and BFD.

  FRRouting is a fork of Quagga.

rpm_license:
  GPL-2.0-or-later AND ISC AND LGPL-2.0-or-later AND BSD-2-Clause AND BSD-3-Clause AND (GPL-2.0-or-later  OR ISC) AND MIT


pkgId: e8ffea24bc0203bd9bc9041770ba058681593119b80d258e8a38123d345a6121
name: frr
arch: i686
version: 8.2.2
epoch: 0
release: 2.el7
summary: Routing daemon
url: http://www.frrouting.org
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: frr-8.2.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: frr-8.2.2-2.el7.i686.rpm
checksum_type: sha256
description:
  FRRouting is free software that manages TCP/IP based routing protocols. It takes
  a multi-server and multi-threaded approach to resolve the current complexity
  of the Internet.

  FRRouting supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng, PIM, NHRP, PBR, EIGRP and BFD.

  FRRouting is a fork of Quagga.


pkgId: 627f57d87a7a031a8f9d1f790a84ad1af309ecfee50a2b8d2600fe22ca86ba47
name: frr-rpki-rtrlib
arch: i686
version: 10.1.2
epoch: 0
release: 2.el7
summary: BGP RPKI support (rtrlib)
url: http://www.frrouting.org
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: frr-10.1.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: frr-rpki-rtrlib-10.1.2-2.el7.i686.rpm
checksum_type: sha256
description:
  Adds RPKI support to FRR's bgpd, allowing validation of BGP routes
  against cryptographic information stored in WHOIS databases.  This is
  used to prevent hijacking of networks on the wider internet.  It is only
  relevant to internet service providers using their own autonomous system
  number.

rpm_license:
[cell repeats an earlier one in this file: 119 characters]


pkgId: 92e7fc7df2b85c5b17655f14c024616768960681cc92a3071ae738e627a4d8f4
name: fuse-dislocker
arch: i686
version: 0.7.3
epoch: 0
release: 2.el7
summary: FUSE filesystem to access BitLocker encrypted volumes
url: https://github.com/Aorimn/dislocker
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: dislocker-0.7.3-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: fuse-dislocker-0.7.3-2.el7.i686.rpm
checksum_type: sha256
description:
  Dislocker has been designed to read BitLocker encrypted partitions ("drives")
  under a Linux system. The driver has the capability to read/write partitions
  encrypted using Microsoft Windows Vista, 7, 8, 8.1 and 10 (AES-CBC, AES-XTS,
  128 or 256 bits, with or without the Elephant diffuser, encrypted partitions);
  BitLocker-To-Go encrypted partitions (USB/FAT32 partitions).

  A mount point needs to be given to dislocker-fuse. Once keys are decrypted, a
  file named 'dislocker-file' appears into this provided mount point. This file
  is a virtual NTFS partition, it can be mounted as any NTFS partition and then
  reading from it or writing to it is possible.


pkgId: 9806c57f649fa42063933e72cabe020582963c489a6e83bdfff527e765c8d3da
name: fwbackups
arch: noarch
version: 1.43.7
epoch: 0
release: 8.el7
summary: A feature-rich user backup program
url: http://www.diffingo.com/oss/fwbackups/
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Applications/Archiving
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fwbackups-1.43.7-8.el7.src.rpm
rpm_packager: RED SOFT
location_href: fwbackups-1.43.7-8.el7.noarch.rpm
checksum_type: sha256
description:
  fwbackups is a feature-rich user backup program that allows users (including
  but not limited to root) to backup their files on demand or periodically via
  backup sets. Each set may have different settings meaning users can backup
  groups of files and folders to different destinations at different times.
  Restores can be performed at any time using an existing backup from fwbackups
  or from the contents of an external folder or archive.


pkgId: 3723a6d701a43135dc7906566326af8ff5daadb26604bda919e3f91a88b905ce
name: fwupd-efi
arch: x86_64
version: 1.4
epoch: 0
release: 1.el7
summary: Firmware update EFI binaries
url: https://github.com/fwupd/fwupd-efi
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fwupd-efi-1.4-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fwupd-efi-1.4-1.el7.x86_64.rpm
checksum_type: sha256
description:
  fwupd is a project to allow updating device firmware, and this package provides
  the EFI binary that is used for updating using UpdateCapsule.


pkgId: d6c067035b7af232d64cca4d64d9f5dadb6f53421612cd806e89a5a49d019608
name: fwupd-plugin-flashrom
arch: i686
version: 1.8.17
epoch: 0
release: 1.el7
summary: fwupd plugin using flashrom
url: https://github.com/fwupd/fwupd
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fwupd-1.8.17-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fwupd-plugin-flashrom-1.8.17-1.el7.i686.rpm
checksum_type: sha256
description:
  This provides the optional package which is only required on hardware that
  can be flashed using flashrom. It is probably not required on servers.


pkgId: aff18ad258f8c8e5b0598c8a8a5e04f2a7dafb3bb8c34e97f714cd0647e3a4e4
name: fwupd-plugin-modem-manager
arch: i686
version: 2.0.19
epoch: 0
release: 1.el7
summary: fwupd plugin using ModemManger
url: https://github.com/fwupd/fwupd
rpm_license: LGPL-2.1-or-later
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fwupd-2.0.19-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fwupd-plugin-modem-manager-2.0.19-1.el7.i686.rpm
checksum_type: sha256
description:
  This provides the optional package which is only required on hardware that
  might have mobile broadband hardware. It is probably not required on servers.


pkgId: cf570625e38995b8275a5f1507dbcd099efe39b59df6c24ee490f92f04d12f25
name: fwupd-plugin-uefi-capsule-data
arch: x86_64
version: 1.8.17
epoch: 0
release: 1.el7
summary: Localized data for the UEFI UX capsule
url: https://github.com/fwupd/fwupd
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: fwupd-1.8.17-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: fwupd-plugin-uefi-capsule-data-1.8.17-1.el7.x86_64.rpm
checksum_type: sha256
description:
  This provides the pregenerated BMP artwork for the UX capsule, which allows the
  "Installing firmware update…" localized text to be shown during a UEFI firmware
  update operation. This subpackage is probably not required on embedded hardware
  or server machines.


pkgId: 442fd9579457da8ec6c0df01855cdc95ed76703e17f7edb3a349d8d2f8552e02
name: gajim
arch: noarch
version: 1.1.3
epoch: 0
release: 3.el7
summary: Jabber client written in PyGTK
url: https://gajim.org/
rpm_license: GPLv3
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gajim-1.1.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gajim-1.1.3-3.el7.noarch.rpm
checksum_type: sha256
description:
  Gajim is a Jabber client written in PyGTK. The goal of Gajim's developers is
  to provide a full featured and easy to use xmpp client for the GTK+ users.
  Gajim does not require GNOME to run, even though it exists with it nicely.


pkgId: 95cc328baab60ea91a62ef4ffe043ed3cd5826f2dd5568cff8b04553c2267f91
name: gajim
arch: noarch
version: 1.5.0
epoch: 0
release: 1.el7
summary: Jabber client written in PyGTK.
url: https://gajim.org
rpm_license: GPL-3.0-only
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gajim-1.5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gajim-1.5.0-1.el7.noarch.rpm
checksum_type: sha256
description:
  gajim is a Jabber client written in PyGTK. The goal of gajim's developers is
  to provide a full featured and easy to use xmpp client for the GTK+ users.
  gajim does not require GNOME to run, even though it exists with it nicely.


pkgId: 8ba66e52044062e45e3654c718e8998ede2bfa7f45d62e6184bd00714c6fd2de
name: galera
arch: i686
version: 26.4.11
epoch: 0
release: 3.el7
summary: Synchronous multi-master wsrep provider (replication engine)
url: http://galeracluster.com/
rpm_license: GPLv2
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: galera-26.4.11-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: galera-26.4.11-3.el7.i686.rpm
checksum_type: sha256
description:
  Galera is a fast synchronous multimaster wsrep provider (replication engine)
  for transactional databases and similar applications. For more information
  about wsrep API see https://github.com/codership/wsrep-API repository. For a
  description of Galera replication engine see https://www.galeracluster.com web.


pkgId: 3cdf37069c68d1c9db06af781bf399aad55ee2a0c4336a07a5ed4e390370ded9
name: gambas3-dev-tools
arch: i686
version: 3.16.3
epoch: 0
release: 3.el7
summary: Development environment for Gambas3
url: http://gambas.sourceforge.net/
rpm_license: GPL+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gambas3-3.16.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gambas3-dev-tools-3.16.3-3.el7.i686.rpm
checksum_type: sha256
description:
  The gambas3-dev-tools package contains the tools needed to compile Gambas3
  projects without having to install the complete development environment
  (gambas3-ide).


pkgId: 5f71a6b5b990daec53fdb42f31b715663ce070a33b84ecfd17b78f634141062e
name: gambas3-gui
arch: i686
version: 3.16.3
epoch: 0
release: 3.el7
summary: Virtual package for Gambas3 packages that just need a gui
url: http://gambas.sourceforge.net/
rpm_license: GPL+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gambas3-3.16.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gambas3-gui-3.16.3-3.el7.i686.rpm
checksum_type: sha256
description:
  This package is a virtual package that depends on one of the following
  packages: gambas3-gb-qt4, gambas3-gb-qt5, gambas3-gb-gtk, gambas3-gb-gtk3.
  It is used as a dependency for packages that requires any GUI package (like
  gambas3-gb-form).


pkgId: 20bcf8dd80a398229cadfe7a2312687a2437fcf626aa29fcf46961c131b8eaad
name: gambas3-ide
arch: i686
version: 3.16.3
epoch: 0
release: 3.el7
summary: The complete Gambas3 Development Environment
url: http://gambas.sourceforge.net/
rpm_license: GPL+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gambas3-3.16.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gambas3-ide-3.16.3-3.el7.i686.rpm
checksum_type: sha256
description:
  This package includes the complete Gambas3 Development Environment.
  It pulls in the Gambas3 components necessary for the IDE to function.


pkgId: 46ad022c41f064433e16206ec087835ea0d8b676a6c33bc9a11de8318aca7bf4
name: gambas3-runtime
arch: i686
version: 3.16.3
epoch: 0
release: 3.el7
summary: Runtime environment for Gambas3
url: http://gambas.sourceforge.net/
rpm_license: GPL+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gambas3-3.16.3-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gambas3-runtime-3.16.3-3.el7.i686.rpm
checksum_type: sha256
description:
  Gambas3 is a free development environment based on a Basic interpreter
  with object extensions, like Visual Basic. This package contains the
  runtime components necessary to run programs designed in Gambas3.


pkgId: 135ea7070397b65d9c3a72fbfb8f11d7d3c1d01235e173aeb2c4e5eb02c70d95
name: gaupol
arch: noarch
version: 1.9
epoch: 0
release: 1.el7
summary: Редактор текстовых субтитров
url: https://otsaloma.io/gaupol/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gaupol-1.9-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gaupol-1.9-1.el7.noarch.rpm
checksum_type: sha256
description:
  Gaupol - редактор для текстовых субтитров. Он поддерживает множество форматов
  файлов субтитров и предоставляет средства для их создания, редактирования и
  синхронизации с видео.


pkgId: 5396aa7a2016ed9e508243c6b018a67a6f8d981317ee097d5368c7ea7f615ef8
name: gavl
arch: i686
version: 1.4.0
epoch: 0
release: 7.el7
summary: A library for handling uncompressed audio and video data
url: http://gmerlin.sourceforge.net/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: System Environment/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gavl-1.4.0-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: gavl-1.4.0-7.el7.i686.rpm
checksum_type: sha256
description:
  Gavl is a library for handling and converting uncompressed audio and
  video data. It provides datatypes for audio/video formats and standardized
  structures to store the data. It supports converting between all formats.
  Some conversion functions are available in multiple versions (MMX...),
  which are selected by compile time configuration, CPU autodetection and
  user options.


pkgId: 5213f17d2d0ec5d35bc02159ea08f95803b681bd7b612a4390d787ae71d61f02
name: gavl-devel
arch: i686
version: 1.4.0
epoch: 0
release: 7.el7
summary: Development files for gavl
url: http://gmerlin.sourceforge.net/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Development/Libraries
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gavl-1.4.0-7.el7.src.rpm
rpm_packager: RED SOFT
location_href: gavl-devel-1.4.0-7.el7.i686.rpm
checksum_type: sha256
description:
  The gavl-devel package contains libraries and header files for
  developing applications that use gavl.


pkgId: d755d2246d392eba56e490aa09e22836b52a66e78a1801c9f25eacd006161cec
name: gawk
arch: i686
version: 5.1.0
epoch: 0
release: 2.el7
summary: The GNU version of the AWK text processing utility
url: https://www.gnu.org/software/gawk/
rpm_license: GPLv3+ and GPLv2+ and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gawk-5.1.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: gawk-5.1.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The gawk package contains the GNU version of AWK text processing utility. AWK is
  a programming language designed for text processing and typically used as a data
  extraction and reporting tool.

  The gawk utility can be used to do quick and easy text pattern matching,
  extracting or reformatting. It is considered to be a standard Linux tool for
  text processing.


pkgId: 6d5c78ad3706d25113f6642cc16e320d53c0ebf5f15e91acbb1832ab677d5f07
name: gawk-all-langpacks
arch: i686
version: 5.1.0
epoch: 0
release: 2.el7
summary: Additional localisation files for gawk utility
url: https://www.gnu.org/software/gawk/
rpm_license: GPLv3+ and GPLv2+ and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gawk-5.1.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: gawk-all-langpacks-5.1.0-2.el7.i686.rpm
checksum_type: sha256
description:
  The base package of gawk supports only the english localisation. This subpackage
  contains additional localisation files.


pkgId: af79f82a39a1788a466a3deb575386ec993b88fa3bdb9619f36f27199b03fd80
name: gawk-devel
arch: i686
version: 5.1.0
epoch: 0
release: 2.el7
summary: Header file for gawk extensions development
url: https://www.gnu.org/software/gawk/
rpm_license: GPLv3+ and GPLv2+ and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gawk-5.1.0-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: gawk-devel-5.1.0-2.el7.i686.rpm
checksum_type: sha256
description:
  This subpackage provides /usr/include/gawkapi.h header file, which contains
  definitions for use by extension functions calling into gawk. For more info
  about gawk extensions, please refer to `The GNU Awk User's Guide`.

  However, unless you are developing an extension to gawk, you most likely do not
  need this subpackage.


pkgId: d6abb4d302b90077f41238bbb9798c98030a5cb2eca388cc2642864335db5dd5
name: gcc
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: Various compilers (C, C++, Objective-C, ...)
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  The gcc package contains the GNU Compiler Collection version 11.
  You'll need this package in order to compile C code.


pkgId: de3261cae1ce871fb8079025a18819b9e46e06cb5078f6d149dfe033052fc271
name: gcc-aarch64-linux-gnu
arch: i686
version: 11.5.0
epoch: 0
release: 1.el7
summary: Cross-build binary utilities for aarch64-linux-gnu
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cross-gcc-11.5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gcc-aarch64-linux-gnu-11.5.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Cross-build GNU C compiler.

  Only building kernels is currently supported.  Support for cross-building
  user space programs is not currently provided as that would massively multiply
  the number of packages.


pkgId: 67e8083b56fc0c26f5af61ecf2cb1bac26e752ddb359cca78198b14014269641
name: gcc-c++
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: C++ support for GCC
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-c++-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  This package adds C++ support to the GNU Compiler Collection.
  It includes support for most of the current C++ specification,
  including templates and exception handling.


pkgId: 89e79b73b168fd203d951f222ef3ab677579a154e54162e2000069c3727b8fc5
name: gcc-c++-aarch64-linux-gnu
arch: i686
version: 11.5.0
epoch: 0
release: 1.el7
summary: Cross-build binary utilities for aarch64-linux-gnu
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cross-gcc-11.5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gcc-c++-aarch64-linux-gnu-11.5.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Cross-build GNU C++ compiler.

  Only the compiler is provided; not libstdc++.  Support for cross-building
  user space programs is not currently provided as that would massively multiply
  the number of packages.


pkgId: 54ee9a00084d99581dda4d7bed538e9c3d8cccf373388e81de9a186039e1b97f
name: gcc-gfortran
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: Fortran support
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-gfortran-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  The gcc-gfortran package provides support for compiling Fortran
  programs with the GNU Compiler Collection.


pkgId: 1ac555a745a773746e896e752d05a58d95563d312d6e78d83360bf59506ff711
name: gcc-objc
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: Objective-C support for GCC
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-objc-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  gcc-objc provides Objective-C support for the GCC.
  Mainly used on systems running NeXTSTEP, Objective-C is an
  object-oriented derivative of the C language.


pkgId: 5d4234d340a12eca713e35b6cb697811f99fe8275a393bc38018f81017efda06
name: gcc-offload-nvptx
arch: x86_64
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: Offloading compiler to NVPTX
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-offload-nvptx-11.4.0-1.el7.3.x86_64.rpm
checksum_type: sha256
description:
  The gcc-offload-nvptx package provides offloading support for
  NVidia PTX.  OpenMP and OpenACC programs linked with -fopenmp will
  by default add PTX code into the binaries, which can be offloaded
  to NVidia PTX capable devices if available.


pkgId: 0278d10b7ebe556f64ceaa698918fa66bceef1893fb76f99b86104365222c3bd
name: gcc-plugin-devel
arch: i686
version: 11.4.0
epoch: 0
release: 1.el7.3
summary: Support for compiling GCC plugins
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcc-11.4.0-1.el7.3.src.rpm
rpm_packager: RED SOFT
location_href: gcc-plugin-devel-11.4.0-1.el7.3.i686.rpm
checksum_type: sha256
description:
  This package contains header files and other support files
  for compiling GCC plugins.  The GCC plugin ABI is currently
  not stable, so plugins must be rebuilt any time GCC is updated.


pkgId: 270f96d21afd634fe6b27a8a49e5fe5bf733b1d669fae82351cbed4eb1cb871a
name: gcc-ppc64-linux-gnu
arch: i686
version: 11.5.0
epoch: 0
release: 1.el7
summary: Cross-build binary utilities for ppc64-linux-gnu
url: http://gcc.gnu.org
rpm_license: GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: cross-gcc-11.5.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gcc-ppc64-linux-gnu-11.5.0-1.el7.i686.rpm
checksum_type: sha256
description:
  Cross-build GNU C++ compiler.

  Only building kernels is currently supported.  Support for cross-building
  user space programs is not currently provided as that would massively multiply
  the number of packages.


pkgId: dab95e8cbf682fb8868afd859b187b4f8d6140c85dc2b6df8f96a8de1111d806
name: gcr
arch: i686
version: 3.41.0
epoch: 0
release: 1.el7
summary: A library for bits of crypto UI and parsing
url: https://wiki.gnome.org/Projects/CryptoGlue
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gcr-3.41.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gcr-3.41.0-1.el7.i686.rpm
checksum_type: sha256
description:
  gcr is a library for displaying certificates, and crypto UI, accessing
  key stores. It also provides a viewer for crypto files on the GNOME
  desktop.

  gck is a library for accessing PKCS#11 modules like smart cards.


pkgId: 642e049390564e80862e0801e210f4169fae2b0c6d674eef649f6e72e4c48483
name: gd
arch: i686
version: 2.3.1
epoch: 0
release: 3.el7
summary: A graphics library for quick creation of PNG or JPEG images
url: http://libgd.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gd-2.3.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gd-2.3.1-3.el7.i686.rpm
checksum_type: sha256
description:
  The gd graphics library allows your code to quickly draw images
  complete with lines, arcs, text, multiple colors, cut and paste from
  other images, and flood fills, and to write out the result as a PNG or
  JPEG file. This is particularly useful in Web applications, where PNG
  and JPEG are two of the formats accepted for inline images by most
  browsers. Note that gd is not a paint program.


pkgId: ce5d920222dae68c26272f5d9955acb6ce427d04f7e12a5dc24b408101f85d92
name: gd-devel
arch: i686
version: 2.3.1
epoch: 0
release: 3.el7
summary: The development libraries and header files for gd
url: http://libgd.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gd-2.3.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gd-devel-2.3.1-3.el7.i686.rpm
checksum_type: sha256
description:
  The gd-devel package contains the development libraries and header
  files for gd, a graphics library for creating PNG and JPEG graphics.


pkgId: 1481f4b7c8506b41ea5f3aeabe26cd98ef093416c644e92a7e88b936d553d6aa
name: gd-progs
arch: i686
version: 2.3.1
epoch: 0
release: 3.el7
summary: Utility programs that use libgd
url: http://libgd.github.io/
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gd-2.3.1-3.el7.src.rpm
rpm_packager: RED SOFT
location_href: gd-progs-2.3.1-3.el7.i686.rpm
checksum_type: sha256
description:
  The gd-progs package includes utility programs supplied with gd, a
  graphics library for creating PNG and JPEG images.


pkgId: a29095d2ce952dcee7f03fc03a76842a157c0c1c318afbf3e4a9031db3446385
name: gdal
arch: i686
version: 3.2.2
epoch: 0
release: 2.el7
summary: GIS file format library
url: http://www.gdal.org
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdal-3.2.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdal-3.2.2-2.el7.i686.rpm
checksum_type: sha256
description:
  Geospatial Data Abstraction Library (GDAL/OGR) is a cross platform
  C++ translator library for raster and vector geospatial data formats.
  As a library, it presents a single abstract data model to the calling
  application for all supported formats. It also comes with a variety of
  useful commandline utilities for data translation and processing.

  It provides the primary data access engine for many applications.
  GDAL/OGR is the most widely used geospatial data access library.


pkgId: e332f0b057505d1bc0f1aa000151453e7deaef25abc6449c2dd1aa3c4180e3da
name: gdal-python-tools
arch: i686
version: 3.2.2
epoch: 0
release: 2.el7
summary: Python tools for the GDAL file format library
url: http://www.gdal.org
rpm_license: MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdal-3.2.2-2.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdal-python-tools-3.2.2-2.el7.i686.rpm
checksum_type: sha256
description:
  The GDAL Python package provides number of tools for programming and
  manipulating GDAL file format library


pkgId: 0b400171943312ee161fa0308d798fcb3f019ba5f2940b2d8a4f2458804f9270
name: gdb
arch: i686
version: 11.2
epoch: 0
release: 4.el7
summary: A stub package for GNU source-level debugger
url: https://gnu.org/software/gdb/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-11.2-4.el7.i686.rpm
checksum_type: sha256
description:
  'gdb' package is only a stub to install gcc-gdb-plugin for 'compile' commands.
  See package 'gdb-headless'.

rpm_license:
  GPLv3+ and GPLv3+ with exceptions and GPLv2+ and GPLv2+ with exceptions and GPL+ and LGPLv2+ and LGPLv3+ and BSD and Public Domain and GFDL


pkgId: 22f11b68b62e16337d1860219b170e3b67f7d44824e95729da970c3570b3fe11
name: gdb-doc
arch: noarch
version: 11.2
epoch: 0
release: 4.el7
summary: Documentation for GDB (the GNU source-level debugger)
url: https://gnu.org/software/gdb/
rpm_license: GFDL
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-doc-11.2-4.el7.noarch.rpm
checksum_type: sha256
description:
  GDB, the GNU debugger, allows you to debug programs written in C, C++,
  Java, and other languages, by executing them in a controlled fashion
  and printing their data.

  This package provides INFO, HTML and PDF user manual for GDB.


pkgId: 1d78cd15ca8cdd519d23eb22169428244e91bb6f38c24c97b93c9e5d669477a5
name: gdb-gdbserver
arch: i686
version: 11.2
epoch: 0
release: 4.el7
summary: A standalone server for GDB (the GNU source-level debugger)
url: https://gnu.org/software/gdb/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-gdbserver-11.2-4.el7.i686.rpm
checksum_type: sha256
description:
  GDB, the GNU debugger, allows you to debug programs written in C, C++,
  Java, and other languages, by executing them in a controlled fashion
  and printing their data.

  This package provides a program that allows you to run GDB on a different
  machine than the one which is running the program being debugged.

rpm_license:
[cell repeats an earlier one in this file: 139 characters]


pkgId: 06216a8aac5ab7c8ec404572ccd6fd7047f0525ec988432ab05cd5f321750eb9
name: gdb-headless
arch: i686
version: 11.2
epoch: 0
release: 4.el7
summary: A GNU source-level debugger for C, C++, Fortran, Go and other languages
url: https://gnu.org/software/gdb/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-headless-11.2-4.el7.i686.rpm
checksum_type: sha256
description:
  GDB, the GNU debugger, allows you to debug programs written in C, C++,
  Java, and other languages, by executing them in a controlled fashion
  and printing their data.

rpm_license:
[cell repeats an earlier one in this file: 139 characters]


pkgId: 0739fe14e087cc2ceb588e16507939f5c341a20086a8330108ea8cea23d6fa61
name: gdb-minimal
arch: i686
version: 11.2
epoch: 0
release: 4.el7
summary: A GNU source-level debugger for C, C++, Fortran, Go and other languages (minimal version)
url: https://gnu.org/software/gdb/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-4.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-minimal-11.2-4.el7.i686.rpm
checksum_type: sha256
description:
  GDB, the GNU debugger, allows you to debug programs written in C, C++,
  Java, and other languages, by executing them in a controlled fashion
  and printing their data.

  This package provides a minimal version of GDB, tailored to be used by
  the Fedora buildroot.  It should probably not be used by end users.

rpm_license:
[cell repeats an earlier one in this file: 139 characters]


pkgId: 87312e6e8f8f783be693f1c0f8d30910c319aaa21730dc93740ff4e7d8ce82d2
name: gdb-minimal
arch: i686
version: 11.2
epoch: 0
release: 5.el7
summary: A GNU source-level debugger for C, C++, Fortran, Go and other languages (minimal version)
url: https://gnu.org/software/gdb/
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdb-11.2-5.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdb-minimal-11.2-5.el7.i686.rpm
checksum_type: sha256
description:
  GDB, the GNU debugger, allows you to debug programs written in C, C++,
  Java, and other languages, by executing them in a controlled fashion
  and printing their data.

  This package provides a minimal version of GDB, tailored to be used by
  the buildroot. It should probably not be used by end users.

rpm_license:
[cell repeats an earlier one in this file: 139 characters]


pkgId: cc16e78671313f80cc1ed230c37d0b3339915ef987170318835358672dcdc456
name: gdk-pixbuf2
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: An image loading library
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  gdk-pixbuf is an image loading library that can be extended by loadable
  modules for new image formats. It is used by toolkits such as GTK+ or
  clutter.


pkgId: ac5aca5c52e09e0e04a78d3b37e569000478090bb819fc74bf11255654b56d7a
name: gdk-pixbuf2-devel
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: Development files for gdk-pixbuf
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-devel-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the libraries and header files that are needed
  for writing applications that are using gdk-pixbuf.


pkgId: 14669ae470605155ca544358436626188aee6afdc12aef587329667989f695c9
name: gdk-pixbuf2-modules
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: Additional image modules for gdk-pixbuf
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-modules-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the additional modules that are needed to load various
  image formats such as ICO and JPEG.


pkgId: 028617108fce283cb8bb02acf077918cd63ea1225dc784babf552ef777337b69
name: gdk-pixbuf2-tests
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: Tests for the gdk-pixbuf2 package
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-tests-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  The gdk-pixbuf2-tests package contains tests that can be used to verify
  the functionality of the installed gdk-pixbuf2 package.


pkgId: 60b277b96f61c731424cc6c0add88a5b6f361f0f5cb462e3676a9f08bb94cc79
name: gdk-pixbuf2-xlib
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: Additional library for using gdk-pixbuf with bare xlib
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-xlib-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the old libgdk-pixbuf-xlib library that is needed by some
  programs to load GdkPixbuf using bare XLib calls.


pkgId: d725bd05e00b9dfd68ba1240b0d77a6e77716dff7cf92cc88c123666e97af606
name: gdk-pixbuf2-xlib-devel
arch: i686
version: 2.40.0
epoch: 0
release: 10.el7
summary: Development files for gdk-pixbuf-xlib
url: http://www.gtk.org
rpm_license: LGPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdk-pixbuf2-2.40.0-10.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdk-pixbuf2-xlib-devel-2.40.0-10.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the libraries and header files that are needed
  for writing applications that are using gdk-pixbuf-xlib.


pkgId: 95dc4a56f02bc586a43bafd221b17d303854f0bb83f085a06cdce6dfe1ae6d0a
name: gdm
arch: i686
version: 3.38.2.1
epoch: 1
release: 1.el7
summary: The GNOME Display Manager
url: https://wiki.gnome.org/Projects/GDM
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdm-3.38.2.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdm-3.38.2.1-1.el7.i686.rpm
checksum_type: sha256
description:
  GDM, the GNOME Display Manager, handles authentication-related backend
  functionality for logging in a user and unlocking the user's session after
  it's been locked. GDM also provides functionality for initiating user-switching,
  so more than one user can be logged in at the same time. It handles
  graphical session registration with the system for both local and remote
  sessions (in the latter case, via the XDMCP protocol).  In cases where the
  session doesn't provide it's own display server, GDM can start the display
  server on behalf of the session.


pkgId: 8221c835b537ea6fe4bddf715d0051e7f1933018fa6b44da45adc610bbdd88a5
name: gdm-pam-extensions-devel
arch: i686
version: 3.38.2.1
epoch: 1
release: 1.el7
summary: Macros for developing GDM extensions to PAM
url: https://wiki.gnome.org/Projects/GDM
rpm_license: GPLv2+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: gdm-3.38.2.1-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: gdm-pam-extensions-devel-3.38.2.1-1.el7.i686.rpm
checksum_type: sha256
description:
  The gdm-pam-extensions-devel package contains headers and other
  files that are helpful to PAM modules wishing to support
  GDM specific authentication features.


pkgId: db47b2c298ac69fdd4a84bebaead9e9ba012736d10e1eb107e601aa45883fe7c
name: geany
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: A fast and lightweight IDE using GTK3
url: http://www.geany.org/
rpm_license: GPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Geany is a small and fast integrated development environment with basic
  features and few dependencies to other packages or Desktop Environments.

  Some features:
  - Syntax highlighting
  - Code completion
  - Code folding
  - Construct completion/snippets
  - Auto-closing of XML and HTML tags
  - Call tips
  - Support for Many languages like C, Java, PHP, HTML, Python, Perl, Pascal
  - symbol lists and symbol name auto-completion
  - Code navigation
  - Simple project management
  - Plugin interface


pkgId: 28a0a79429296c2908127844b992d919a320b700ca7615ff1c800565de5976db
name: geany-devel
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Header files for building Geany plug-ins
url: http://www.geany.org/
rpm_license: GPLv2+ and MIT
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-devel-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains the header files and pkg-config file needed for building
  Geany plug-ins. You do not need to install this package to use Geany.


pkgId: e25cfbe5633cfbffbdda49ffa8e79b07319ac4730e68c2a02c4b1fff55eacb10
name: geany-plugins-addons
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Miscellaneous Addons for Geany
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-addons-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugins consists of various small addons too small to justify their own
  plugin, but are useful to have. The following functionality is implemented:
  * Document list: This addon places a new item in the toolbar and when clicked
    offers a menu listing all open files plus the 'Close All' and 'Close Other
    Documents' menu items. This can be useful to quickly access open files and
    switch to them.
  * Open and Copy URI: Adds 'Open URI' and 'Copy URI' menu items to the editor
    menu when the word under the cursor looks like a URI. 'Open URI' uses the
    browser command configured in Geany to open it.
  * Tasks: The tasks plugin goes through a file being edited and picks out
    lines with configurable keywords (e.g. "TODO" or "FIXME") in them. It
    collects the text after those words and puts them in a new "Tasks" tab in
    the message window. Clicking on a task in that tab takes you to the line in
    the file where the task was defined.
  * Systray: Adds a status icon to the notification area (systray) and provides
    a simple popup menu with some basic actions. It can also be used to
    quickly show and hide the Geany main window.
  * Bookmark list: Add a list of defined bookmarks (line markers) to the sidebar.
    This list contains all bookmarks defined in the current file
    for faster overview and access.
  * Mark Word: When double-clicking a word, all occurrences of this word are
    searched and then highlighted (similar to Geany's 'Mark All' Find option).
  * Strip trailing blank lines: This addon removes excessive trailing blank
    lines from the document when it is saved. If you have 'Ensure new line at
    file end' option checked in Preferences, one trailing newline will be left.
  * XML tagging: XML tagging allows to easy tag a selected text, by checking for a
    selection, offering a little dialog for inserting a tag and
    replacing a selection.


pkgId: db7be5ff33d4c128c18d13eca4765a54b017f01ae84ef3701dc2b04bfa5575e7
name: geany-plugins-autoclose
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Intellectually helps you to write code
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-autoclose-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin enables auto-closing features. Auto-closing works while you typing
  and intellectually helps you to write code.


pkgId: 87bb9cb850bd9b9deee700fe2c67696a980822c9910257c48897f7f16f77d7d0
name: geany-plugins-codenav
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Navigate through your source code easily
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-codenav-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  This plugin adds some facilities for navigating in the code.
  Actually, it will make it possible to:
  - switch between header and implementation
  - go to a file by typing its name


pkgId: d5699031eb5287e4263fa3c483198bde37a20fb1e2a9018c3f674c8f58411d67
name: geany-plugins-common
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Common files used by all geany plugins
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-common-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  This package contains some common files which are used by every Geany plugin,
  e.g. language translations.


pkgId: dbc044b31bf3e4c4c056ee7373eeeb10ff1830659242be48496ca10e9e1a4f48
name: geany-plugins-debugger
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Enables debugging in Geany
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Development/Tools
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-debugger-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Plugin enables debugging in Geany. Currently supports GDB only, but was
  developed with multiple debuggers support in mind, so the other backends
  support is planned as well.


pkgId: d82864c4d2643f1b3ddca7c26035a8f564d26b9d220fdbf2aa623163ed24c674
name: geany-plugins-defineformat
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Write multiline defines with aligned backslash
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-defineformat-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  On-the-fly #define prettyprinter. This plugin will help you to
  write multiline defines with aligned backslash. After installed successfully,
  load the plugin in Geany's plugin manager. Try it: open C/C++ file and type:


pkgId: dbdb77e3b279d118eb8407f01930560309094e1e89672e25d426dbbfd3907b6c
name: geany-plugins-geanyctags
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Generate and query ctags files for a Geany project
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyctags-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Even though Geany supports symbol definition searching by itself within the
  open files (and with a plugin support within the whole project), tag
  regeneration can become too slow for really big projects. This is why this
  plugin was created. It makes it possible to generate the tag file only once and
  just query it when searching for a particular symbol definition/declaration.
  This approach is fine for big projects where most of the codebase remains
  unchanged and the tag positions remain more or less static.


pkgId: 4b848e4d7faa478fbfcc8e5efbb066fb4e5fac50a6718a4ffc606b9a5cc839b9
name: geany-plugins-geanydoc
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Call documentation from within Geany
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanydoc-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Geanydoc allows you to execute specific commands on the word under the cursor.
  This word is passed as an argument to the command. The output of the command
  can either be placed into a special buffer called "DOC" or can be used to
  execute an external program. Geanydoc is intended to be used for searching
  through API documentation.


pkgId: f04560c106b947cf65a775b16101a3f32da835f1c6fb5dfbdff2bf16ad776ce1
name: geany-plugins-geanyextrasel
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Additional features for selecting code
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyextrasel-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Geanyextrasel provides some special features for selecting code, e.g. from
  opening brace to closed brace and so on. This plugin will be very useful for
  you if you're a programmer and working with much sourcecodes.


pkgId: 4fec868d365454970b54149dca8f5bb61c558c691a22ce92351387775afa08b9
name: geany-plugins-geanygendoc
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Automatically generate documentation source code
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanygendoc-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  GeanyGenDoc is a plugin for Geany that aims to automatically generate
  documentation comment basis from the source code.

  You may also want to install the following packages which enable
  some extra features:
   - Docutils (http://docutils.sourceforge.net/) -- or another implementation of
     rst2html -- is needed to (re)generate the HTML manual.


pkgId: d98e63dac240297948ba292b8463d90e856f4d6ff6dcbf2952f6d4dbda16b4b8
name: geany-plugins-geanyinsertnum
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Insert huge number ranges with small efforts
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyinsertnum-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Geanyinsertnum replaces a (possibly zero-width) rectangular selection with
  integer numbers, using start/step/base etc. specified by the user. For
  practical reasons, the number of lines is limited to 500000.


pkgId: 383155ce731187fcc660d2686431bdf235119d70eca735ae46dda83dcfecfb49
name: geany-plugins-geanymacro
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: User defined Macros for Geany
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanymacro-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  GeanyMacro is a plugin to provide user defined macros for Geany. It started
  out as part of the ConText feature parity plugin, which was split into
  individual plugins to better suit Geany's ethos of being as light as
  possible while allowing users to select which features they want to add to
  the core editor. The idea was taken from a Text Editor for Windows called
  ConText.

  This plugin alows you to record and use your own macros. Macros are
  sequences of actions that can then be repeated with a single key
  combination. So if you had dozens of lines where you wanted to delete the
  last 2 characters, you could simple start recording, press End, Backspace,
  Backspace, down line and then stop recording. Then simply trigger the macro
  and it would automaticaly edit the line and move to the next. You could then
  just repeatedly trigger the macro to do as many lines as you want.


pkgId: 7bfa3de09d434fcc281559551954147f090c7f035202a0465d4357f51d2b6060
name: geany-plugins-geanyminiscript
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Geany Mini-Script filter plugin
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyminiscript-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  The GeanyMiniScript plugin is a tool to apply a script filter on:

  * the text selection
  * the current document
  * all documents of the current session.


  The filter type can be:

  * Unix shell script
  * perl script
  * python script
  * sed commands
  * awk script


  The output can be:

  * the selection of the current document
  * all the current document
  * or a new document


pkgId: 43e1602ad35c5e515d512be26f839d6d1fe05e8dcaa3b17325a70c4b44370212
name: geany-plugins-geanyminiscript
arch: i686
version: 2.0
epoch: 0
release: 1.el7
summary: Geany Mini-Script filter plugin
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-2.0-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyminiscript-2.0-1.el7.i686.rpm
checksum_type: sha256
description:
  The GeanyMiniScript plugin is a tool to apply a script filter on:

  * the text selection
  * the current document
  * all documents of the current session.

  The filter type can be:

  * Unix shell script
  * perl script
  * python script
  * sed commands
  * awk script

  The output can be:

  * the selection of the current document
  * all the current document
  * or a new document


pkgId: 27964d44d810a70b3a431d178de1081fa24dfdea3a08af96556a94680ad41d10
name: geany-plugins-geanynumberedbookmarks
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Provide users 10 numbered Bookmarks
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanynumberedbookmarks-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  GeanyNumberedBookmarks is a plugin to provide users with 10 numbered
  bookmarks (in addition to the usual bookmarks). It started out as part of
  the ConText feature parity plugin, which was split into individual plugins
  to better suit Geany's ethos of being as light as possible while allowing
  users to select which features they want to add to the core editor. The idea
  was taken from a Text Editor for Windows called ConText.

  Normally if you had more than one bookmark, you would have to cycle through
  them until you reached the one you wanted. With this plugin you can go
  straight to the bookmark that you want with a single key combination.


pkgId: 6e24dd187890a23c0cc66bd2b288e277693c02e5e28cdeb4e4c6fc1a7637d5e0
name: geany-plugins-geanypg
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: encrypt, decrypt and verify signatures with GnuPG
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanypg-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  GeanyPG is a plugin for Geany that allows the user to encrypt, decrypt and
  verify signatures with GnuPG.


pkgId: f299b450d7715d87f18abbc2579975769ab4a455042d662ac00c7848ea7070b9
name: geany-plugins-geanyprj
arch: i686
version: 1.38
epoch: 0
release: 1.el7
summary: Provides an alternate project management tool for Geany
url: http://plugins.geany.org/
rpm_license: GPLv3+
rpm_vendor: RED SOFT
rpm_group: Unspecified
rpm_buildhost: stapel.red-soft.ru
rpm_sourcerpm: geany-plugins-1.38-1.el7.src.rpm
rpm_packager: RED SOFT
location_href: geany-plugins-geanyprj-1.38-1.el7.i686.rpm
checksum_type: sha256
description:
  Geanyprj provides an alternate project management approach to Geany's built-in
  project facility. The idea is to be less a "session manager" as the built-in
  project management does: It allows/requires you to manually open and close
  project and allows you to store project files in different locations from
  project sources.

  Geanyprj takes a different approach:
  It never saves session information, so that project files can be stored in
  version control without constant noise from changes of opened files or cursor
  position. You also will never have to open/close projects manually. If a
  *.geanyprj file is found somewhere up in path it will be opened automatically.


